| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
The depth check in xfrm6_input_addr() is off by one:
if (1 + sp->len == XFRM_MAX_DEPTH)
goto drop;
...
sp->xvec[sp->len++] = x;
xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode
receive path re-enters IPv6 input via xfrm_trans_reinject() with that
secpath preserved. If the inner packet carries a destination-options HAO
option or a type-2 routing header, xfrm6_input_addr() is called with
sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so
sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write
stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS
flags it and panics under panic_on_warn.
Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also
restores one chain level the old check rejected at sp->len == 5.
UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10
index 6 is out of range for type 'xfrm_state *[6]' |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6
rpcb_register_inet4() and rpcb_register_inet6() store the result of
rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL.
rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and
the unchecked NULL is then carried into the synchronous RPCBPROC_SET
encode path: rpcb_register_call() -> rpc_call_sync() ->
rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is
strlen(string), dereferencing NULL and oopsing the kernel.
The crash reproduces under failslab on v6.12; with KASAN the NULL
dereference surfaces as a fault on the shadow of address zero:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000 [#1] PREEMPT SMP KASAN
RIP: 0010:strlen (lib/string.c:409)
Call Trace:
encode_rpcb_string (net/sunrpc/rpcb_clnt.c:890)
rpcb_enc_getaddr (net/sunrpc/rpcb_clnt.c:910)
rpcauth_wrap_req_encode (net/sunrpc/auth.c:745)
call_encode (net/sunrpc/clnt.c:1966)
__rpc_execute (net/sunrpc/sched.c:952)
rpc_run_task (net/sunrpc/clnt.c:1243)
rpc_call_sync (net/sunrpc/clnt.c:1272)
rpcb_v4_register (net/sunrpc/rpcb_clnt.c:500)
svc_generic_rpcbind_set
nfsd_rpcbind_set
svc_register
svc_setup_socket
svc_addsock
write_ports
nfsctl_transaction_write
vfs_write
The crash is reachable when an in-kernel RPC service (nfsd, lockd,
nfs-callback) registers with the local rpcbind under enough memory
pressure for the small GFP_KERNEL kstrdup() in rpc_sockaddr2uaddr() to
fail. The asynchronous getport path already handles this exact failure
mode by returning -ENOMEM; only the two register helpers omit the check.
Mirror that handling: bail out with -ENOMEM when rpc_sockaddr2uaddr()
returns NULL, before the address is fed into the encoder. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix out-of-bounds read of INDEX_ROOT in reparse/objid init
ntfs_reparse_init() and ntfs_objid_init() parse the index root of the
$Extend/$Reparse and $Extend/$ObjId metafiles (the INDEX_ROOT attributes
named $R and $O). They read its type and rule fields through
resident_data(), which does not check that the resident attribute is
large enough to hold them.
mi_enum_attr() accepts a resident attribute with data_off == asize and
data_size == 0. For such an attribute placed last in its MFT record,
resident_data() returns a pointer to the end of the record_size buffer,
so reading root->type / root->rule reads past the allocation.
Use resident_data_ex(attr, sizeof(struct INDEX_ROOT)) and bail out when
it returns NULL, as ntfs_security_init() already does for $SDH / $SII.
The attribute is only parsed while mounting a crafted image, so this
needs CAP_SYS_ADMIN.
BUG: KASAN: slab-out-of-bounds in ntfs_reparse_init (fs/ntfs3/fsntfs.c:2306)
Read of size 4 at addr ffff88801219dc00 by task mount
ntfs_reparse_init (fs/ntfs3/fsntfs.c:2306)
ntfs_fill_super (fs/ntfs3/super.c:1604)
get_tree_bdev_flags (fs/super.c:1703)
vfs_get_tree (fs/super.c:1758)
path_mount (fs/namespace.c:4131)
__x64_sys_mount (fs/namespace.c:4360) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: check dir entry fits before reading the hash trailer in ext4_search_dir()
For casefolded encrypted directories ext4 stores an 8-byte hash trailer
after the name (EXT4_DIRENT_HASHES()), at an offset derived from
de->name_len. On the sb_no_casefold_compat_fallback() path ext4_match()
reads that trailer, but ext4_search_dir()'s by-hand pre-check only tests
de->name + de->name_len <= dlimit, which proves the name fits, not the
rounded trailer. A crafted entry whose name ends at the block boundary
passes the check while EXT4_DIRENT_HASHES(de) lands past the block end,
so ext4_match() reads out of bounds on an ordinary lookup. KASAN reports
it as a use-after-free when the page after the directory block holds a
freed object:
BUG: KASAN: use-after-free in ext4_match (fs/ext4/namei.c:1435)
Read of size 4 at addr ffff888010458000 by task exploit
Call Trace:
ext4_match (fs/ext4/namei.c:1435)
ext4_search_dir (fs/ext4/namei.c:1470)
__ext4_find_entry (fs/ext4/namei.c:1268 fs/ext4/namei.c:1632)
ext4_lookup (fs/ext4/namei.c:1703 fs/ext4/namei.c:1769)
...
filename_lookup (fs/namei.c:2842)
vfs_statx (fs/stat.c:353)
__do_sys_newfstatat (fs/stat.c:538)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Require, for hash-in-dirent directories, that the whole entry including
the rounded trailer fits before calling ext4_match(). This is the same
bound ext4_check_dir_entry() already enforces via ext4_dir_rec_len(), so
no well-formed entry is rejected. The other caller, ext4_find_dest_de(),
runs ext4_check_dir_entry() first and is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid divide by zero in rt6_multipath_rebalance
rt6_multipath_rebalance() calculates the total eligible nexthop weight
in one pass and programs upper bounds in a second pass. Since
RTM_NEWROUTE is RTNL-free, a concurrent
ignore_routes_with_linkdown update can make the first pass return zero
while the second sees an eligible nexthop, causing
rt6_upper_bound_set() to divide by zero.
UBSAN: division-overflow in net/ipv6/route.c:4845:17
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
rt6_upper_bound_set() net/ipv6/route.c:4845
rt6_multipath_rebalance()
fib6_add_rt2node()
ip6_route_multipath_add()
inet6_rtm_newroute()
Skip upper-bound calculation when the first pass reports a zero total.
This respects the lock-free performance considerations here and solves
insecure scenarios. |
| MapServer is a system for developing web-based GIS applications. Prior to 8.6.4, MapServer's PostGIS runtime filter translation in src/mappostgis.cpp and msPostGISLayerTranslateFilter() treats a filteritem as numeric when CONNECTIONTYPE POSTGIS and metadata such as gml_<item>_type=Integer are configured, but it does not verify that attacker-controlled CGI qstring or OGC API Features featureId input is a numeric literal. The unquoted input is concatenated into the generated PostgreSQL/PostGIS predicate, allowing an unauthenticated remote attacker with access to an affected query endpoint to bypass predicates, enumerate unintended records, perform boolean-based or time-based SQL injection, and increase database load. The issue does not by itself establish database modification capabilities. This issue is fixed in version 8.6.4. |
| A flaw in libmongoc's SCRAM authentication implementation caused the client to continue the authentication handshake and transmit the client proof even when a nonce mismatch was detected in the server's first message. An unauthorized party with a man-in-the-middle position could exploit this by injecting a crafted server-first-message containing a controlled salt and low iteration count, then capturing the resulting client proof to perform offline password cracking. This vulnerability is mitigated by TLS, which is standard in production deployments. |
| A missing lower-bound validation in the bson_new_from_buffer() function of libbson allows an integer underflow when processing BSON data with a zero-length prefix. The function reads a 32-bit document length from the input buffer but does not verify that the value is at least 5 (the minimum valid BSON document size) before using it in an array index calculation. When the length field is zero, the expression used to check the document's null terminator wraps to UINT32_MAX, causing a heap out-of-bounds read that crashes the process. An unauthorized party who can supply crafted BSON input to an application using this API can cause a denial of service. |
| A permissions issue was addressed with improved path validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An application may be able to access restricted files. |
| Caddy is an extensible server platform that uses TLS by default. In version 2.11.3 and earlier, three configuration-dependent weaknesses affect the handler and placeholder layer. In modules/caddyhttp/rewrite/rewrite.go, Rewrite.Rewrite() can pass attacker-controlled replacement bytes through buildQueryString for a second placeholder expansion when a rewrite URI ends with a literal question mark, allowing injected environment or request-variable placeholders to disclose data and, when the file provider is registered, allowing injected file placeholders to disclose readable files. The issue is fixed in version 2.11.4. |
| Imager versions from 0.45_02 before 1.035 for Perl read outside the EXIF block via unchecked start offsets in tiff_load_ifd.
tiff_load_ifd() validates an IFD entry's data by checking that `entry->offset + entry->size` stays within the EXIF block, and never checks the start offset itself. Where that sum is not the real end of the data, the check passes with the entry starting outside the block.
Through 1.032 `entry->offset` is a plain int, so on the usual two's-complement implementations an offset with the high bit set converts to negative and the sum can land back inside the block. From 1.033 the field is a size_t and the addition wraps only where size_t is 32 bits. The IFD's own start offset is checked the same way and wraps where unsigned long is 32 bits, which includes 64-bit Windows.
Any caller of Imager->read() on an attacker-supplied image may receive EXIF tags holding bytes from outside the block, or crash the process. |
| SigNoz versions 0.87.0 before 0.142.0 fail to escape user-supplied telemetry field-key names in the v5 query_range API, allowing authenticated users to inject SQL. Attackers with Viewer role or higher can embed backticks and quotes in field names to break out of identifiers and string literals, executing arbitrary ClickHouse SQL to read system tables and exfiltrate data. |
| A flaw was found in Netty. SpdySessionHandler accepts an unlimited number of concurrent remote-initiated streams because localConcurrentStreams defaults to Integer.MAX_VALUE and the handler provides no API to change it. A remote peer can open a SPDY connection and send a large number of SYN_STREAM frames with FLAG_FIN=0, causing unbounded heap and direct memory allocation that can lead to JVM OutOfMemoryError and a denial of service. |
| A flaw was found in Netty's `netty-handler-ssl-ocsp` component. A remote attacker can exploit this vulnerability by providing an Online Certificate Status Protocol (OCSP) response that omits the optional `nextUpdate` field. This omission causes the OCSP validation to be silently skipped, leading to applications proceeding with an unvalidated certificate. This can result in a bypass of security controls where certificate validation is expected. |
| DD-WRT firmware, as deployed on TP-Link TL-WR740N v1 through v4 hardware, stores sensitive authentication credentials in cleartext within non-volatile memory. The exposed material includes SSH private keys, dynamic DNS passwords, email notification credentials and administrative passwords. An attacker with physical access to the device can extract these credentials from an SPI flash dump, leading to device compromise, infiltration of the connected network and unauthorised access to dependent third-party services. |
| The Schema & Structured Data for WP & AMP WordPress plugin before 1.66 does not correctly verify the ownership or the moderation status of a comment before returning its content, allowing unauthenticated users to read the content of comments still awaiting moderation or marked as spam. |
| The Schema & Structured Data for WP & AMP WordPress plugin before 1.66 does not check that a user is allowed to edit the specific post they request schema generation for, allowing users with the contributor role and above to obtain the content of other users' draft, pending, private and password protected posts. |
| The Eventin WordPress plugin before 4.1.24 does not verify a user's capability to create accounts when adding a speaker, allowing users with contributor-level access and above to create new WordPress user accounts that carry capabilities beyond their own, including publishing content and uploading files, and, by supplying an email address they control, to obtain a working login to the created account. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500_fg: fix use-after-free on remove
ab8500_fg_remove() destroys the driver workqueue while the threaded
interrupt handlers are still armed; they are devm-managed and freed
only after ->remove() returns, so a handler that fires in that
window queues work on the freed workqueue.
Tear the workqueue down through devm instead, registering its cleanup
after the power supply and before the interrupt requests. devm then
frees the interrupts first, so the handlers can no longer queue work,
before disabling the delayed and plain work items and destroying the
workqueue. Disabling the items, rather than cancelling them, keeps
them disabled so no producer (including the power-supply
external_power_changed callback) can requeue them.
Found by an in-house static analysis tool. |
| Frappe Learning Management System (LMS) is a learning system that helps users structure their content. Prior to version 2.52.1, a remote attacker can request a traversal path handled by SCORMRenderer.render in lms/page_renderers.py. The renderer constructs and opens a server-side path without first confirming that its real path remains within public/scorm, allowing files outside the SCORM directory to be read when they are accessible to the server process. This issue is fixed in version 2.52.1. |
