| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: stop recv() if initial process_rx_list gave us non-DATA
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: cancle set bad inode after removing name fails
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles". |
| In the Linux kernel, the following vulnerability has been resolved:
staging: gpib: fix unset padding field copy back to userspace
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: handle jset (if a & b ...) as a jump in CFG computation
BPF_JSET is a conditional jump and currently verifier.c:can_jump()
does not know about that. This can lead to incorrect live registers
and SCC computation.
E.g. in the following example:
1: r0 = 1;
2: r2 = 2;
3: if r1 & 0x7 goto +1;
4: exit;
5: r0 = r2;
6: exit;
W/o this fix insn_successors(3) will return only (4), a jump to (5)
would be missed and r2 won't be marked as alive at (3). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid accessing uninitialized arvif->ar during beacon miss
During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.
However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.
While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.
Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.
==========================================================================
wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full)
RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k]
Call Trace:
__iterate_interfaces+0x11a/0x410 [mac80211]
ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211]
ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k]
ath12k_roam_event+0x393/0x560 [ath12k]
ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k]
ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k]
ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k]
ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k]
ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
process_one_work+0xe3a/0x1430
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
rv: Use strings in da monitors tracepoints
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: mark K1 pll1_d8 as critical
The pll1_d8 clock is enabled by the boot loader, and is ultimately a
parent for numerous clocks, including those used by APB and AXI buses.
Guodong Xu discovered that this clock got disabled while responding to
getting -EPROBE_DEFER when requesting a reset controller.
The needed clock (CLK_DMA, along with its parents) had already been
enabled. To respond to the probe deferral return, the CLK_DMA clock
was disabled, and this led to parent clocks also reducing their enable
count. When the enable count for pll1_d8 was decremented it became 0,
which caused it to be disabled. This led to a system hang.
Marking that clock critical resolves this by preventing it from being
disabled.
Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to
be supplied for a CCU_FACTOR_GATE clock. |
| In the Linux kernel, the following vulnerability has been resolved:
pinmux: fix race causing mux_owner NULL with active mux_usecount
commit 5a3e85c3c397 ("pinmux: Use sequential access to access
desc->pinmux data") tried to address the issue when two client of the
same gpio calls pinctrl_select_state() for the same functionality, was
resulting in NULL pointer issue while accessing desc->mux_owner.
However, issue was not completely fixed due to the way it was handled
and it can still result in the same NULL pointer.
The issue occurs due to the following interleaving:
cpu0 (process A) cpu1 (process B)
pin_request() { pin_free() {
mutex_lock()
desc->mux_usecount--; //becomes 0
..
mutex_unlock()
mutex_lock(desc->mux)
desc->mux_usecount++; // becomes 1
desc->mux_owner = owner;
mutex_unlock(desc->mux)
mutex_lock(desc->mux)
desc->mux_owner = NULL;
mutex_unlock(desc->mux)
This sequence leads to a state where the pin appears to be in use
(`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can
cause NULL pointer on next pin_request on the same pin.
Ensure that updates to mux_usecount and mux_owner are performed
atomically under the same lock. Only clear mux_owner when mux_usecount
reaches zero and no new owner has been assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx95-blk-ctl: Fix synchronous abort
When enabling runtime PM for clock suppliers that also belong to a power
domain, the following crash is thrown:
error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_mux_get_parent+0x60/0x90
lr : clk_core_reparent_orphans_nolock+0x58/0xd8
Call trace:
clk_mux_get_parent+0x60/0x90
clk_core_reparent_orphans_nolock+0x58/0xd8
of_clk_add_hw_provider.part.0+0x90/0x100
of_clk_add_hw_provider+0x1c/0x38
imx95_bc_probe+0x2e0/0x3f0
platform_probe+0x70/0xd8
Enabling runtime PM without explicitly resuming the device caused
the power domain cut off after clk_register() is called. As a result,
a crash happens when the clock hardware provider is added and attempts
to access the BLK_CTL register.
Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable()
and getting rid of the pm_runtime_disable() in the cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: scarlett2: Fix missing NULL check
scarlett2_input_select_ctl_info() sets up the string arrays allocated
via kasprintf(), but it misses NULL checks, which may lead to NULL
dereference Oops. Let's add the proper NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix release of uninitialized resources on error path
The commit in the fixes tag made sure that mlx5_vdpa_free()
is the single entrypoint for removing the vdpa device resources
added in mlx5_vdpa_dev_add(), even in the cleanup path of
mlx5_vdpa_dev_add().
This means that all functions from mlx5_vdpa_free() should be able to
handle uninitialized resources. This was not the case though:
mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx()
were not able to do so. This caused the splat below when adding
a vdpa device without a MAC address.
This patch fixes these remaining issues:
- Makes mlx5_vdpa_destroy_mr_resources() return early if called on
uninitialized resources.
- Moves mlx5_cmd_init_async_ctx() early on during device addition
because it can't fail. This means that mlx5_cmd_cleanup_async_ctx()
also can't fail. To mirror this, move the call site of
mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free().
An additional comment was added in mlx5_vdpa_free() to document
the expectations of functions called from this context.
Splat:
mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned?
------------[ cut here ]------------
WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0
[...]
Call Trace:
<TASK>
? __try_to_del_timer_sync+0x61/0x90
? __timer_delete_sync+0x2b/0x40
mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa]
genl_family_rcv_msg_doit+0xd8/0x130
genl_family_rcv_msg+0x14b/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
genl_rcv_msg+0x47/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x27b/0x3b0
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x1fa/0x210
? ___pte_offset_map+0x17/0x160
? next_uptodate_folio+0x85/0x2b0
? percpu_counter_add_batch+0x51/0x90
? filemap_map_pages+0x515/0x660
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x7b/0x2c0
? do_read_fault+0x108/0x220
? do_pte_missing+0x14a/0x3e0
? __handle_mm_fault+0x321/0x730
? count_memcg_events+0x13f/0x180
? handle_mm_fault+0x1fb/0x2d0
? do_user_addr_fault+0x20c/0x700
? syscall_exit_work+0x104/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0c25b0feca
[...]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
w/ "mode=lfs" mount option, generic/299 will cause system panic as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2835!
Call Trace:
<TASK>
f2fs_allocate_data_block+0x6f4/0xc50
f2fs_map_blocks+0x970/0x1550
f2fs_iomap_begin+0xb2/0x1e0
iomap_iter+0x1d6/0x430
__iomap_dio_rw+0x208/0x9a0
f2fs_file_write_iter+0x6b3/0xfa0
aio_write+0x15d/0x2e0
io_submit_one+0x55e/0xab0
__x64_sys_io_submit+0xa5/0x230
do_syscall_64+0x84/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0010:new_curseg+0x70f/0x720
The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may
trigger foreground gc only if it allocates any physical block, it will be
a little bit later when there is multiple threads writing data w/
aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so
f2fs_map_blocks() does block allocations aggressively.
In order to fix this issue, let's give a chance to trigger foreground
gc in prior to block allocation in f2fs_map_blocks(). |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pds: Fix missing detach_ioas op
When CONFIG_IOMMUFD is enabled and a device is bound to the pds_vfio_pci
driver, the following WARN_ON() trace is seen and probe fails:
WARNING: CPU: 0 PID: 5040 at drivers/vfio/vfio_main.c:317 __vfio_register_dev+0x130/0x140 [vfio]
<...>
pds_vfio_pci 0000:08:00.1: probe with driver pds_vfio_pci failed with error -22
This is because the driver's vfio_device_ops.detach_ioas isn't set.
Fix this by using the generic vfio_iommufd_physical_detach_ioas
function. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
The following is a crash log for this case.
BUG: kernel NULL pointer dereference, address: 0000000000000032
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4)
Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024
RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core]
Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11
41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45
32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85
RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246
RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011
RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6
RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000
R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4
R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)]
__iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)]
ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)]
rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)]
rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix WARN_ON for monitor mode on some devices
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure
Avoid potential NULL pointer dereference by checking the return value of
kmalloc and handling allocation failure properly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: add a retry logic in net6_rt_notify()
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Modules linked in:
CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342
Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8
RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790
RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005
RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6
R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6
R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000
FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0
Call Trace:
<TASK>
ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356
ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536
inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647
rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: No more self recovery
When a node withdraws and it turns out that it is the only node that has
the filesystem mounted, gfs2 currently tries to replay the local journal
to bring the filesystem back into a consistent state. Not only is that
a very bad idea, it has also never worked because gfs2_recover_func()
will refuse to do anything during a withdraw.
However, before even getting to this point, gfs2_recover_func()
dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before
commit 04133b607a78 ("gfs2: Prevent double iput for journal on error")
and is a NULL pointer dereference since then.
Simply get rid of self recovery to fix that. |
