Total
8372 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-11714 | 1 Mozilla | 3 Firefox, Firefox Esr, Thunderbird | 2025-11-03 | 8.8 High |
| Memory safety bugs present in Firefox ESR 115.28, Firefox ESR 140.3, Thunderbird ESR 140.3, Firefox 143 and Thunderbird 143. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 144, Firefox ESR < 115.29, Firefox ESR < 140.4, Thunderbird < 144, and Thunderbird < 140.4. | ||||
| CVE-2025-11709 | 1 Mozilla | 3 Firefox, Firefox Esr, Thunderbird | 2025-11-03 | 9.8 Critical |
| A compromised web process was able to trigger out of bounds reads and writes in a more privileged process using manipulated WebGL textures. This vulnerability affects Firefox < 144, Firefox ESR < 115.29, Firefox ESR < 140.4, Thunderbird < 144, and Thunderbird < 140.4. | ||||
| CVE-2024-57822 | 1 Librdf | 1 Raptor Rdf Syntax Library | 2025-11-03 | 4 Medium |
| In Raptor RDF Syntax Library through 2.0.16, there is a heap-based buffer over-read when parsing triples with the nquads parser in raptor_ntriples_parse_term_internal(). | ||||
| CVE-2024-41013 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't walk off the end of a directory data block This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry to make sure don't stray beyond valid memory region. Before patching, the loop simply checks that the start offset of the dup and dep is within the range. So in a crafted image, if last entry is xfs_dir2_data_unused, we can change dup->length to dup->length-1 and leave 1 byte of space. In the next traversal, this space will be considered as dup or dep. We may encounter an out of bound read when accessing the fixed members. In the patch, we make sure that the remaining bytes large enough to hold an unused entry before accessing xfs_dir2_data_unused and xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make sure that the remaining bytes large enough to hold a dirent with a single-byte name before accessing xfs_dir2_data_entry. | ||||
| CVE-2025-22087 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-31 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix array bounds error with may_goto may_goto uses an additional 8 bytes on the stack, which causes the interpreters[] array to go out of bounds when calculating index by stack_size. 1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT cases, reject loading directly. 2. For non-JIT cases, calculating interpreters[idx] may still cause out-of-bounds array access, and just warn about it. 3. For jit_requested cases, the execution of bpf_func also needs to be warned. So move the definition of function __bpf_prog_ret0_warn out of the macro definition CONFIG_BPF_JIT_ALWAYS_ON. | ||||
| CVE-2025-46819 | 1 Redis | 1 Redis | 2025-10-31 | 6.3 Medium |
| Redis is an open source, in-memory database that persists on disk. Versions 8.2.1 and below allow an authenticated user to use a specially crafted LUA script to read out-of-bound data or crash the server and subsequent denial of service. The problem exists in all versions of Redis with Lua scripting. This issue is fixed in version 8.2.2. To workaround this issue without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to block a script by restricting both the EVAL and FUNCTION command families. | ||||
| CVE-2021-21995 | 1 Vmware | 2 Cloud Foundation, Esxi | 2025-10-31 | 7.5 High |
| OpenSLP as used in ESXi has a denial-of-service vulnerability due a heap out-of-bounds read issue. A malicious actor with network access to port 427 on ESXi may be able to trigger a heap out-of-bounds read in OpenSLP service resulting in a denial-of-service condition. | ||||
| CVE-2025-5777 | 2 Citrix, Netscaler | 4 Netscaler Application Delivery Controller, Netscaler Gateway, Adc and 1 more | 2025-10-30 | 7.5 High |
| Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server | ||||
| CVE-2025-22226 | 1 Vmware | 6 Cloud Foundation, Esxi, Fusion and 3 more | 2025-10-30 | 7.1 High |
| VMware ESXi, Workstation, and Fusion contain an information disclosure vulnerability due to an out-of-bounds read in HGFS. A malicious actor with administrative privileges to a virtual machine may be able to exploit this issue to leak memory from the vmx process. | ||||
| CVE-2025-21946 | 1 Linux | 1 Linux Kernel | 2025-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds in parse_sec_desc() If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd struct size. If it is smaller, It could cause slab-out-of-bounds. And when validating sid, It need to check it included subauth array size. | ||||
| CVE-2025-21985 | 1 Linux | 1 Linux Kernel | 2025-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bound accesses [WHAT & HOW] hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4), but location can have size up to 6. As a result, it is necessary to check location against MAX_HPO_DP2_ENCODERS. Similiarly, disp_cfg_stream_location can be used as an array index which should be 0..5, so the ASSERT's conditions should be less without equal. | ||||
| CVE-2023-36766 | 1 Microsoft | 5 365 Apps, Excel, Office and 2 more | 2025-10-30 | 7.8 High |
| Microsoft Excel Information Disclosure Vulnerability | ||||
| CVE-2023-36803 | 1 Microsoft | 9 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 6 more | 2025-10-30 | 5.5 Medium |
| Windows Kernel Information Disclosure Vulnerability | ||||
| CVE-2025-62525 | 2 Linux, Openwrt | 2 Linux, Openwrt | 2025-10-30 | 7.9 High |
| OpenWrt Project is a Linux operating system targeting embedded devices. Prior to version 24.10.4, local users could read and write arbitrary kernel memory using the ioctls of the ltq-ptm driver which is used to drive the datapath of the DSL line. This only effects the lantiq target supporting xrx200, danube and amazon SoCs from Lantiq/Intel/MaxLinear with the DSL in PTM mode. The DSL driver for the VRX518 is not affected. ATM mode is also not affected. Most VDSL lines use PTM mode and most ADSL lines use ATM mode. OpenWrt is normally running as a single user system, but some services are sandboxed. This vulnerability could allow attackers to escape a ujail sandbox or other contains. This is fixed in OpenWrt 24.10.4. There are no workarounds. | ||||
| CVE-2025-62492 | 2 Quickjs-ng, Quickjs Project | 2 Quickjs, Quickjs | 2025-10-30 | 6.5 Medium |
| A vulnerability stemming from floating-point arithmetic precision errors exists in the QuickJS engine's implementation of TypedArray.prototype.indexOf() when a negative fromIndex argument is supplied. * The fromIndex argument (read as a double variable, $d$) is used to calculate the starting position for the search. * If d is negative, the index is calculated relative to the end of the array by adding the array's length (len) to d: $$d_{new} = d + \text{len}$$ * Due to the inherent limitations of floating-point arithmetic, if the negative value $d$ is extremely small (e.g., $-1 \times 10^{-20}$), the addition $d + \text{len}$ can result in a loss of precision, yielding an outcome that is exactly equal to $\text{len}$. * The result is then converted to an integer index $k$: $k = \text{len}$. * The search function proceeds to read array elements starting from index $k$. Since valid indices are $0$ to $\text{len}-1$, starting the read at index $\text{len}$ is one element past the end of the array. This allows an attacker to cause an Out-of-Bounds Read of one element immediately following the buffer. While the scope of this read is small (one element), it can potentially lead to Information Disclosure of adjacent memory contents, depending on the execution environment. | ||||
| CVE-2023-53010 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt: Do not read past the end of test names Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. | ||||
| CVE-2024-6600 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-10-30 | 6.3 Medium |
| Due to large allocation checks in Angle for GLSL shaders being too lenient an out-of-bounds access could occur when allocating more than 8192 ints in private shader memory on macOS. This vulnerability affects Firefox < 128, Firefox ESR < 115.13, Thunderbird < 115.13, and Thunderbird < 128. | ||||
| CVE-2024-6606 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-10-30 | 8.2 High |
| Clipboard code failed to check the index on an array access. This could have led to an out-of-bounds read. This vulnerability affects Firefox < 128 and Thunderbird < 128. | ||||
| CVE-2025-40014 | 1 Linux | 1 Linux Kernel | 2025-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: objtool, spi: amd: Fix out-of-bounds stack access in amd_set_spi_freq() If speed_hz < AMD_SPI_MIN_HZ, amd_set_spi_freq() iterates over the entire amd_spi_freq array without breaking out early, causing 'i' to go beyond the array bounds. Fix that by stopping the loop when it gets to the last entry, so the low speed_hz value gets clamped up to AMD_SPI_MIN_HZ. Fixes the following warning with an UBSAN kernel: drivers/spi/spi-amd.o: error: objtool: amd_set_spi_freq() falls through to next function amd_spi_set_opcode() | ||||
| CVE-2021-25487 | 1 Samsung | 1 Android | 2025-10-30 | 7.3 High |
| Lack of boundary checking of a buffer in set_skb_priv() of modem interface driver prior to SMR Oct-2021 Release 1 allows OOB read and it results in arbitrary code execution by dereference of invalid function pointer. | ||||