| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling ->init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix user-space data loss with MADV_FREE and THP
Some of users of Polars (a data analytics library) have lost production
data from this bug. They seem to have just the right combination of
huge pages, MADV_FREE and heavy reclaim pressure.
pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY),
silently discarding the hardware dirty bit. The subsequent
pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into
_PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already
stripped from the value, so there is nothing left to transfer.
Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask,
and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify()
is the odd one out. Any pmd_modify() on a writable, dirty PMD loses
the dirty state.
One visible consequence is data loss with MADV_FREE on PMD-mapped THP:
memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty
madvise(buf, size, MADV_FREE); // PMD cleaned but left writable,
// folio marked lazyfree
memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again
mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit
mprotect(buf, size, PROT_READ|PROT_WRITE);
// ... memory pressure ...
Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with
no dirty bit set anywhere and frees it in
__discard_anon_folio_pmd_locked(), even though the data was rewritten
after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA
hinting alone can trigger the same loss, as do_huge_pmd_numa_page()
restores the PMD through pmd_modify() as well.
PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping
the dirty bit means rewritten data is never written back.
Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like
pte_modify() and pud_modify() do. The existing
pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the
hardware-dirty <-> saved-dirty transition based on the write bit,
preserving the shadow-stack encoding rules. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix PCI device reference counting in amd_smn_init()
The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.
Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.
Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.
Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
When a LUN_RESET aborts a WRITE command that is in the
TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and
waits for the frontend to finish processing.
If the initiator subsequently sends the remaining dataout PDUs,
__iscsit_check_dataout_hdr() catches the payload, stops the dataout
timer if the sequence is final and finally dumps the data. However, the
iSCSI target doesn't trigger the completion process for these aborted
commands. Because of this, the abort path hangs indefinitely in
target_put_cmd_and_wait(), leading to a deadlocked target worker thread.
Fix this by explicitly calling target_complete_cmd() when the final
dataout PDU is received for an aborted WRITE command.
target_complete_cmd() detects the CMD_T_ABORTED flag and cleanly routes
the command into target_abort_work, allowing the abort completion to
successfully unblock. |
| In the Linux kernel, the following vulnerability has been resolved:
sunvdc: unmap LDC cookies when the descriptor send fails
__send_request() maps the request's pages into the LDC channel's map
table (ldc_map_sg()), fills in the descriptor and marks it
VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger().
When the trigger fails, the error path only prints a message: the
descriptor stays READY and the cookies are never unmapped. The
mapping is normally released in vdc_end_one() when the peer completes
the descriptor - but a descriptor whose doorbell was never sent will
never complete, and since dr->prod is not advanced on failure, the
reset path (vdc_requeue_inflight(), which walks [cons, prod)) never
visits it either. The map table entries are leaked permanently.
Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop
when vio_ldc_send() returns EAGAIN") trigger failures occur in
practice under load, so every resulting I/O error also leaks one
request's worth of entries from the fixed-size (8192 entries per
channel) map table. Because the allocator hands out contiguous
ranges, fragmentation makes large multi-segment requests fail first
as the table drains, until ldc_map_sg() fails permanently and the
disk is dead until reboot.
It also makes any retry-based recovery unusable: requeuing the
request on -EAGAIN remaps the pages on every attempt, overwriting
desc->cookies and orphaning the previous mapping, so the table
drains at the retry rate. This is the memory exhaustion observed
when the requeue approach was first tested in October 2025.
Roll back on failure: unmap the cookies, mark the descriptor FREE
again and clear the request entry. If the trigger failed with
-ENOTCONN, __vdc_tx_trigger() has already reset the port, which
tears down and reallocates both the dring and the LDC channel
including its map table - nothing to roll back, and the stale
descriptor must not be touched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TX descriptor availability check for TSO traffic
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS context descriptor.
For a highly fragmented TSO skb the check can therefore pass even when the
ring has too few free slots. stmmac_tso_allocator() then writes past the
available descriptors, overwriting descriptors still owned by the DMA
engine, corrupting the TX ring.
Add stmmac_tso_get_num_desc() to compute the exact number of descriptors
needed for the header, the linear payload and each fragment, plus the MSS
context descriptor when required, and use it in the availability check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops()
may release RTNL to call request_module().
However, the replay logic is unnecessary for RTM_GETCHAIN.
Let's apply the replay logic only for RTM_NEWCHAIN.
[0]:
INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022.
task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000
Call Trace:
<TASK>
? clockevents_program_event (kernel/time/clockevents.c:372)
? pskb_expand_head (net/core/skbuff.c:615)
? skb_release_data (net/core/skbuff.c:1122)
? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232)
? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499)
? tc_chain_notify (net/sched/cls_api.c:3045)
? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041)
? netlink_unicast (net/netlink/af_netlink.c:1335)
? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985)
? tc_ctl_chain (net/sched/cls_api.c:3242)
? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146)
? netlink_unicast (net/netlink/af_netlink.c:1354)
? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177)
? netlink_rcv_skb (net/netlink/af_netlink.c:2556)
? netlink_unicast (net/netlink/af_netlink.c:1319)
? netlink_sendmsg (net/netlink/af_netlink.c:1900)
? __sock_sendmsg (net/socket.c:800)
? __sys_sendto (net/socket.c:2281)
? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284)
? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: free emptied bucket on filter move
route4_change can move an existing filter to a different top-level
bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/
FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so
for an existing filter the new handle may differ from the old one and
land in a different bucket. When this happens, the filter is unlinked
from the old bucket, but the bucket itself is never freed once it goes
empty. The stale empty bucket remains in head->table[], causing
route4_delete to report *last=false even after the last live filter is
gone. That pins the empty tcf_proto and causes a leak.
Fix this by refcounting the filters linked to a bucket and freeing the
bucket when the count drops to zero. The existing scan in route4_delete
goes away with it.
The count is updated at all sites that link or unlink a filter during add,
change and delete, and the bucket is dropped from head->table[] as soon as
it reaches zero.
Conditions to recreate the bug:
CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y.
tc qdisc replace dev lo clsact
tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1
tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \
route from 1 to 2
tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \
route from 1 to 2
tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' |
| A security vulnerability has been detected in sheshbabu zen up to 1.5.0. Affected by this issue is the function dangerouslySetInnerHTML of the file features/notes/NotesEditor.jsx of the component Note Editor. The manipulation leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in the Mediawiki - Cargo extension allows Stored XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0. |
| Time-of-check time-of-use (toctou) race condition in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. |
| RouterOS does not compare the complete RSA public key when matching an SSH authentication request to an authorized user key, checking the key type and modulus but omitting the exponent. Because signature verification uses the client-supplied key, an attacker knowing an authorized RSA modulus can supply a key with exponent one, forge a valid signature, and open an SSH command channel as the target user without the private key.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) |
| MikroTik RouterOS accepts malformed RSA/PKCS#1 v1.5 signatures across RSA-based services, including TLS/X.509 certificate validation and SSH host-key authentication. Because its trust store includes an e=3 root CA, an attacker controlling or redirecting an outbound RouterOS TLS connection can use the root’s public certificate - without its private key - to forge a trusted intermediate and issue certificates for arbitrary hostnames, enabling TLS server impersonation. The same permissive verification also undermines RSA-based SSH authentication.
This issue affects only 7.x branch was fixed in versions: 7.23.6 (Long-term) and 7.24.3 (Stable).
Releases 7.23.4 and 7.24.2 included an incomplete fix. |
| Improper Exposure of Resource to Wrong Sphere in the host file helper (gofer) in Google gVisor prior to commit 573a9e73cf844f on Linux platforms with CUSE enabled allows a local attacker with container image deployment privileges to achieve root code execution on the host system. By including a /dev/cuse character device node in a container image, opening the device passes through to the host, allowing the sandboxed attacker to register a host device and exploit CUSE unrestricted ioctl handling to overwrite root udev helper memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless of the
interface state. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_synctty: ensure a writeable skb header
ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header. |
