| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: terminate table name before find_table_lock()
update_counters() and compat_update_counters() forward a user-supplied
32-byte table name to find_table_lock() without NUL-terminating it. On a
lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s",
"ebtable_", name), and vsnprintf() reads past the name field and the
stack object until it hits a zero byte.
BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730)
Read of size 1 at addr ffff8880119dfb20 by task exploit/147
Call Trace:
...
string (lib/vsprintf.c:648 lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
__request_module (kernel/module/kmod.c:150)
do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380)
update_counters (net/bridge/netfilter/ebtables.c:1440)
do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573)
nf_setsockopt (net/netfilter/nf_sockopt.c:101)
ip_setsockopt (net/ipv4/ip_sockglue.c:1424)
raw_setsockopt (net/ipv4/raw.c:847)
__sys_setsockopt (net/socket.c:2393)
...
compat_do_replace() shares the same unterminated name via
compat_copy_ebt_replace_from_user(); terminate it there too so all
find_table_lock() callers behave alike. The other callers already
terminate the name after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: module names must be null-terminated
We need to explicitly check the length, else we may pass non-null
terminated string to request_module(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup
We hit a real softlockup in an internal stress test environment. The
workload was LTP memory/swap stress on a large arm64 machine, with 320
CPUs, about 1TB memory and an 8.6GB swap device. The system was under
heavy load and the swap device had a large number of full clusters. The
softlockup was triggered during a stress test after about 3 days.
So, add periodic cond_resched() calls during large full_clusters
reclaim operations to prevent softlockup issues.
Detailed call trace as follow:
PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7"
#0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4
#1 [ffff800080183d90] panic at ffffa4c1360d5e9c
#2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8
...
#16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614
#17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc
#18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474
#19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c
#20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc
#21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398
#22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix NULL pointer dereference in debugfs
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock(). |
| Subscriber Insecure Direct Object References (IDOR) in WC Ukraine Shipping <= 1.22.3 versions. |
| Unauthenticated Broken Access Control in Quick Event Manager <= 9.17 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Quick Event Manager <= 9.17 versions. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Kevin Pirnie KP Agent Ready allows Retrieve Embedded Sensitive Data.
This issue affects KP Agent Ready: from n/a before 1.2.08. |
| Improper neutralization of special elements used in an OS command (CWE-78) in the blueprint resynthesis framework in Amazon Web Services codecatalyst-blueprints before 0.3.156 might allow a user with permission to commit to a repository in the project to execute arbitrary commands in the blueprint resynthesis environment via shell metacharacters in the owner field of a [local] merge strategy entry in a crafted .ownership-file.
Version 0.3.156 removes shell interpretation of the owner field, running the command directly rather than through a shell, and rejects values outside an allowlisted command form. This eliminates shell metacharacter command injection. To remediate this issue, users should upgrade to version 0.3.156 or later.
No action is required for use of the Amazon CodeCatalyst service. Resynthesis runs in an isolated per-project environment with scoped credentials, and the service applies server-side validation there that rejects [local] merge strategy commands outside a restricted allowlisted form, including for blueprint versions published before 0.3.156. |
| Waku is the minimal React framework. Prior to version 1.0.0-beta.1, Waku's RSC request dispatcher invokes server actions without validating the request's Origin (or Sec-Fetch-Site) header. A cross-origin web attacker can therefore cause a victim browser to issue an authenticated POST to a registered server action endpoint using a CORS-safelisted content type (text/plain), which does not trigger a preflight. Any state-mutating server action that the application exposes via 'use server' can be invoked with the victim's cookies attached. This issue has been patched in version 1.0.0-beta.1. |
| Waku is the minimal React framework. Prior to version 1.0.0-beta.1, the unstable_redirect() helper exported from waku/router/server (packages/waku/src/router/define-router.tsx:156–161) accepts an arbitrary string and reflects it unchanged into the HTTP Location response header with no URL validation, scheme restriction, or path-only enforcement. Any application that passes user-controlled input to this helper — the natural pattern documented in the JSDoc and official fixtures — is vulnerable to open redirect attacks. An attacker who convinces a victim to click a crafted link can silently redirect the browser to an arbitrary external domain, enabling phishing, credential harvesting, and OAuth token theft. Additionally, scheme-relative URLs (//evil.example/) bypass naive https?://-only allow-list filters that developers might add as ad-hoc mitigations. This issue has been patched in version 1.0.0-beta.1. |
| python-jose through 3.5.0 fails to properly validate asymmetric keys in HMAC initialization, accepting DER-encoded public keys that lack PEM armor or SSH prefixes. Attackers holding the service's public key can forge HS256 tokens that pass verification when algorithms are not explicitly restricted. This is an incomplete fix for CVE-2024-33663. |
| rubyzip versions before 3.4.0 contain a path traversal vulnerability in Zip::Entry#extract that fails to properly validate extraction paths using prefix comparison without trailing separators. Attackers can craft archive entries with names like ../upload_backup/owned.sh to write files outside the intended extraction directory into sibling paths sharing the destination prefix. |
| stream-json is a micro-library of stream components for processing JSON and JSONC with a minimal memory footprint. Prior to 3.5.0, the path filters pick, ignore, filter, and replace in src/core/filters/filter-base.js recompute the full path string from the nesting stack for every checkable token. Because the stack length equals the current nesting depth and a checkable token is emitted at every level, a depth D document costs O(D²) rather than O(D) to process. The issue is triggered by nesting depth rather than byte volume, including the documented pick({filter: 'data'}) traversal-until-match path, so an application that sends untrusted JSON through a string or RegExp filter can block the Node.js event loop and cause denial of service with a small deeply nested document. The streamArray, streamObject, and streamValues streamers are not affected because they use the constant-time asm.depth getter. This issue is fixed in version 3.5.0. |
