| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Under certain conditions, when running the nsDocShell destructor, a race condition can cause a use-after-free. We are aware of targeted attacks in the wild abusing this flaw. This vulnerability affects Thunderbird < 68.7.0, Firefox < 74.0.1, and Firefox ESR < 68.6.1. |
| Under certain conditions, when handling a ReadableStream, a race condition can cause a use-after-free. We are aware of targeted attacks in the wild abusing this flaw. This vulnerability affects Thunderbird < 68.7.0, Firefox < 74.0.1, and Firefox ESR < 68.6.1. |
| A use-after-free vulnerability in SVG Animation has been discovered. An exploit built on this vulnerability has been discovered in the wild targeting Firefox and Tor Browser users on Windows. This vulnerability affects Firefox < 50.0.2, Firefox ESR < 45.5.1, and Thunderbird < 45.5.1. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_sock: Initializing vsk->trans to NULL to prevent a dangling pointer
When hvs is released, there is a possibility that vsk->trans may not
be initialized to NULL, which could lead to a dangling pointer.
This issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
An unexpected WARN_ON from flush_work() may occur when cache creation
fails, caused by destroying the uninitialized delayed_work waker in the
error path of cache_create(). For example, the warning appears on the
superblock checksum error.
Reproduce steps:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890
Fix by pulling out the cancel_delayed_work_sync() from the constructor's
error path. This patch doesn't affect the use-after-free fix for
concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix
UAF in destroy()")) as cache_dtr is not changed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: sunxi: Fix accessing an released usb phy
Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on
exit") will cause that usb phy @glue->xceiv is accessed after released.
1) register platform driver @sunxi_musb_driver
// get the usb phy @glue->xceiv
sunxi_musb_probe() -> devm_usb_get_phy().
2) register and unregister platform driver @musb_driver
musb_probe() -> sunxi_musb_init()
use the phy here
//the phy is released here
musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy()
3) register @musb_driver again
musb_probe() -> sunxi_musb_init()
use the phy here but the phy has been released at 2).
...
Fixed by reverting the commit, namely, removing devm_usb_put_phy()
from sunxi_musb_exit(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_edgeport: fix use after free in debug printk
The "dev_dbg(&urb->dev->dev, ..." which happens after usb_free_urb(urb)
is a use after free of the "urb" pointer. Store the "dev" pointer at the
start of the function to avoid this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: Fix use-after-free while sending the offloading packet
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
net: explicitly clear the sk pointer, when pf->create fails
We have recently noticed the exact same KASAN splat as in commit
6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket
creation fails"). The problem is that commit did not fully address the
problem, as some pf->create implementations do not use sk_common_release
in their error paths.
For example, we can use the same reproducer as in the above commit, but
changing ping to arping. arping uses AF_PACKET socket and if packet_create
fails, it will just sk_free the allocated sk object.
While we could chase all the pf->create implementations and make sure they
NULL the freed sk object on error from the socket, we can't guarantee
future protocols will not make the same mistake.
So it is easier to just explicitly NULL the sk pointer upon return from
pf->create in __sock_create. We do know that pf->create always releases the
allocated sk object on error, so if the pointer is not NULL, it is
definitely dangling. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: use RCU read-side critical section in taprio_dump()
Fix possible use-after-free in 'taprio_dump()' by adding RCU
read-side critical section there. Never seen on x86 but
found on a KASAN-enabled arm64 system when investigating
https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa:
[T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0
[T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862
[T15862]
[T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2
[T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024
[T15862] Call trace:
[T15862] dump_backtrace+0x20c/0x220
[T15862] show_stack+0x2c/0x40
[T15862] dump_stack_lvl+0xf8/0x174
[T15862] print_report+0x170/0x4d8
[T15862] kasan_report+0xb8/0x1d4
[T15862] __asan_report_load4_noabort+0x20/0x2c
[T15862] taprio_dump+0xa0c/0xbb0
[T15862] tc_fill_qdisc+0x540/0x1020
[T15862] qdisc_notify.isra.0+0x330/0x3a0
[T15862] tc_modify_qdisc+0x7b8/0x1838
[T15862] rtnetlink_rcv_msg+0x3c8/0xc20
[T15862] netlink_rcv_skb+0x1f8/0x3d4
[T15862] rtnetlink_rcv+0x28/0x40
[T15862] netlink_unicast+0x51c/0x790
[T15862] netlink_sendmsg+0x79c/0xc20
[T15862] __sock_sendmsg+0xe0/0x1a0
[T15862] ____sys_sendmsg+0x6c0/0x840
[T15862] ___sys_sendmsg+0x1ac/0x1f0
[T15862] __sys_sendmsg+0x110/0x1d0
[T15862] __arm64_sys_sendmsg+0x74/0xb0
[T15862] invoke_syscall+0x88/0x2e0
[T15862] el0_svc_common.constprop.0+0xe4/0x2a0
[T15862] do_el0_svc+0x44/0x60
[T15862] el0_svc+0x50/0x184
[T15862] el0t_64_sync_handler+0x120/0x12c
[T15862] el0t_64_sync+0x190/0x194
[T15862]
[T15862] Allocated by task 15857:
[T15862] kasan_save_stack+0x3c/0x70
[T15862] kasan_save_track+0x20/0x3c
[T15862] kasan_save_alloc_info+0x40/0x60
[T15862] __kasan_kmalloc+0xd4/0xe0
[T15862] __kmalloc_cache_noprof+0x194/0x334
[T15862] taprio_change+0x45c/0x2fe0
[T15862] tc_modify_qdisc+0x6a8/0x1838
[T15862] rtnetlink_rcv_msg+0x3c8/0xc20
[T15862] netlink_rcv_skb+0x1f8/0x3d4
[T15862] rtnetlink_rcv+0x28/0x40
[T15862] netlink_unicast+0x51c/0x790
[T15862] netlink_sendmsg+0x79c/0xc20
[T15862] __sock_sendmsg+0xe0/0x1a0
[T15862] ____sys_sendmsg+0x6c0/0x840
[T15862] ___sys_sendmsg+0x1ac/0x1f0
[T15862] __sys_sendmsg+0x110/0x1d0
[T15862] __arm64_sys_sendmsg+0x74/0xb0
[T15862] invoke_syscall+0x88/0x2e0
[T15862] el0_svc_common.constprop.0+0xe4/0x2a0
[T15862] do_el0_svc+0x44/0x60
[T15862] el0_svc+0x50/0x184
[T15862] el0t_64_sync_handler+0x120/0x12c
[T15862] el0t_64_sync+0x190/0x194
[T15862]
[T15862] Freed by task 6192:
[T15862] kasan_save_stack+0x3c/0x70
[T15862] kasan_save_track+0x20/0x3c
[T15862] kasan_save_free_info+0x4c/0x80
[T15862] poison_slab_object+0x110/0x160
[T15862] __kasan_slab_free+0x3c/0x74
[T15862] kfree+0x134/0x3c0
[T15862] taprio_free_sched_cb+0x18c/0x220
[T15862] rcu_core+0x920/0x1b7c
[T15862] rcu_core_si+0x10/0x1c
[T15862] handle_softirqs+0x2e8/0xd64
[T15862] __do_softirq+0x14/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for accessing waker_bfqq after splitting
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del()
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08
Currently rsv_qp is freed before ib_unregister_device() is called
on HIP08. During the time interval, users can still dereg MR and
rsv_qp will be used in this process, leading to a UAF. Move the
release of rsv_qp after calling ib_unregister_device() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_vdpa: assign irq bypass producer token correctly
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during
NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and
simply disabled clocks unconditionally when suspending the system. This
causes problems when the device is already runtime suspended when we go
to sleep -- in which case we double-disable clocks and produce a
WARNing.
Switch back to pm_runtime_force_{suspend,resume}(), because that still
seems like the right thing to do, and the aforementioned commit makes no
explanation why it stopped using it.
Also, refactor some of the resume() error handling, because it's not
actually a good idea to re-disable clocks on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
sch/netem: fix use after free in netem_dequeue
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
When using kernel with the following extra config,
- CONFIG_KASAN=y
- CONFIG_KASAN_GENERIC=y
- CONFIG_KASAN_INLINE=y
- CONFIG_KASAN_VMALLOC=y
- CONFIG_FRAME_WARN=4096
kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:
[ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330
[ 52.047785] Call trace:
[ 52.047787] dump_backtrace+0x0/0x3c0
[ 52.047794] show_stack+0x34/0x50
[ 52.047797] dump_stack_lvl+0x68/0x8c
[ 52.047802] print_address_description.constprop.0+0x74/0x2c0
[ 52.047809] kasan_report+0x210/0x230
[ 52.047815] __asan_report_load1_noabort+0x3c/0x50
[ 52.047820] snd_pcm_suspend_all+0x1a8/0x270
[ 52.047824] snd_soc_suspend+0x19c/0x4e0
The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it. |
| In the Linux kernel, the following vulnerability has been resolved:
ila: call nf_unregister_net_hooks() sooner
syzbot found an use-after-free Read in ila_nf_input [1]
Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().
It should be done in the reverse way, with a synchronize_rcu().
This is a good match for a pre_exit() method.
[1]
BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup include/linux/rhashtable.h:604 [inline]
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
prep_new_page mm/page_alloc.c:1501 [inline]
get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
__kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
__do_kmalloc_node mm/slub.c:4146 [inline]
__kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
__kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
bucket_table_alloc lib/rhashtable.c:186 [inline]
rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
ops_ini
---truncated--- |
