| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
[BUG]
A direct write over unwritten extents can panic the kernel in
ocfs2_assure_trans_credits() when the journal aborts during DIO
completion. The crash is a general protection fault from a NULL pointer
dereference.
[CAUSE]
ocfs2_dio_end_io_write() loops over a direct write's unwritten extents,
marking each written under a single journal handle. If the journal
aborts (for example after an I/O error) while the extent tree is being
updated, the handle is left aborted with its transaction pointer
cleared. The extent merge treats that failure as not critical and
reports success, so the loop keeps using the handle.
ocfs2_assure_trans_credits() reads the handle's remaining credits
without first checking whether the handle is aborted, and that read
dereferences the cleared transaction pointer.
[FIX]
A journal abort is recorded in the handle itself, so callers are
expected to test the handle rather than rely on a returned error.
Make ocfs2_assure_trans_credits() do that, as the other ocfs2 journal
helpers already do, and return -EROFS when the handle is aborted. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
During unmount, ocfs2_journal_shutdown() frees the journal and sets
osb->journal to NULL. Later, when VFS evicts remaining cached inodes,
ocfs2_evict_inode() -> ocfs2_clear_inode() -> ocfs2_checkpoint_inode()
-> ocfs2_ci_fully_checkpointed() dereferences osb->journal, causing a
NULL pointer dereference.
Fix this by adding a NULL check for osb->journal in
ocfs2_checkpoint_inode(). If the journal is NULL, it has already been
fully flushed and destroyed during shutdown, so there is nothing to
checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/crossbar: Use correct index in crossbar_domain_free()
crossbar_domain_free() resets the domain data and then uses the nulled
out irq_data->hwirq member as index to reset the irq_map[] entry and to
write the relevant crossbar register with a safe entry. That means it
never frees the correct index and keeps the crossbar register connection
to the source interrupt active.
If it would not reset the domain data, then this would be even worse as
irq_data->hwirq holds the source interrupt number, but both the map and
register index need the corresponding GIC SPI number and not the source
interrupt number. This might even result in an out of bounds access as
the source interrupt number can be higher than the maximal index space.
Fix this by using the GIC SPI index from the parent domain's irq_data. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma-pcie: Reject devices without driver data
dw_edma_pcie_probe() treats the PCI device ID driver_data as the
template for the controller layout and copies it unconditionally. A
device bound dynamically via sysfs can match the driver without that
data, which leads to a NULL pointer dereference.
Reject such matches before enabling the device. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
For an rx op subscribed on all interfaces (ifindex == 0), the same op
is registered once in the shared per-netns wildcard filter list, so
bcm_rx_handler() can run concurrently on different CPUs for frames
arriving on different net devices.
op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was
taken, allowing concurrent writers to race each other - including a torn
store of the 64-bit rx_stamp on 32-bit platforms.
Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
of the very same frame whose content it is delivering. So the assignment
is placed in the same unbroken bcm_rx_update_lock section as the content
comparison.
As a side effect, the RTR-request frame feature (which never reach
bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only
the notification path needs them. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: reject option groups without values
The pcache target parses optional arguments as name/value pairs. A
table that advertises one optional argument and supplies only a
recognized option name, for example "cache_mode", reaches
parse_cache_opts() with argc == 1. The parser consumes the name,
decrements argc to zero, then calls dm_shift_arg() again for the value.
dm_shift_arg() returns NULL when no arguments remain, and the following
strcmp() dereferences that NULL pointer.
Check that each recognized option has a value before consuming it. This
keeps valid "cache_mode writeback" and "data_crc true/false" tables
unchanged while making malformed tables fail during target construction
with a precise missing-value error. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix leaking uninitialized kernel memory
If hash size is less than device's tuple size, dm-integrity is supposed
to zero the remaining space. There was a bug in the code that zeroing
didn't work. This commit fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix a possible NULL pointer dereference
Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted
if the device has no table. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix use-after-free and double-free in disconnect
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix type confusion in CDC union descriptor parsing
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu()
update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with
u64 nsecs = rlim_new * NSEC_PER_SEC;
On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC
(1000000000L) are 32-bit, so the multiplication is performed in unsigned
long and truncated for rlim_new > 4 seconds before being widened to u64.
The same file already casts to u64 for the matching computation in
check_process_timers():
u64 softns = (u64)soft * NSEC_PER_SEC;
As a result, the truncated value is installed into the CPUCLOCK_PROF
expiry cache (nextevt), causing the process CPU timer to be programmed
to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The
actual SIGXCPU/SIGKILL decision in check_process_timers() already casts
to u64 and is therefore correct, so limit enforcement is not broken;
only the expiry-cache programming is wrong. Apply the same cast here so
both paths convert rlim_cur identically.
64-bit kernels are unaffected. |
