| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.0 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that could have allowed an unauthenticated user to execute GraphQL mutations on behalf of authenticated users due to insufficient CSRF protection. |
| An Improper Input Validation vulnerability in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker, sending a specific genuine BGP packet in an already established BGP session to reset only that session causing a Denial of Service (DoS).
An attacker repeatedly sending the packet will sustain the Denial of Service (DoS).This issue affects Junos OS:
* 25.2 versions before 25.2R2
This issue does not affect Junos OS versions before 25.2R1.
This issue affects Junos OS Evolved:
* 25.2-EVO versions before 25.2R2-EVO
This issue does not affect Junos OS Evolved versions before 25.2R1-EVO.
eBGP and iBGP are affected.
IPv4 and IPv6 are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix use-after-free in mshv_map_user_memory error path
In the error path of mshv_map_user_memory(), calling vfree() directly on
the region leaves the MMU notifier registered. When userspace later unmaps
the memory, the notifier fires and accesses the freed region, causing a
use-after-free and potential kernel panic.
Replace vfree() with mshv_partition_put() to properly unregister
the MMU notifier before freeing the region. |
| Velociraptor versions prior to 0.76.3 contain a vulnerability in the query() plugin which allows access to all orgs with the user's current ACL token. This allows an authenticated GUI user with access in one org, to use the query() plugin, in a notebook cell, to run VQL queries on other orgs which they may not have access to. The user's permissions in the other org are
the same as the permissions they have in the org containing the notebook. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 16.1.0 before 18.9.6, 18.10 before 18.10.4, and 18.11 before 18.11.1 that under certain conditions could have allowed an unauthenticated user to access tokens in the Storybook development environment due to improper input validation. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.10.4 and 18.11 before 18.11.1 that could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions. |
| An out-of-bounds read in the read_global_param() function (libavcodec/av1dec.c) of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| An improper resource deallocation and closure vulnerability in the tools/zmqsend.c component of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input file. |
| A heap buffer overflow in the av_bprint_finalize() function of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| OpenHarness prior to commit dd1d235 contains a command injection vulnerability that allows remote gateway users with chat access to invoke sensitive administrative commands by exploiting insufficient distinction between local-only and remote-safe commands in the gateway handler. Attackers can execute administrative commands such as /permissions full_auto through remote chat sessions to change permission modes of a running OpenHarness instance without operator authorization. |
| free5GC UDR is the Policy Control Function (PCF) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. A memory leak vulnerability in versions prior to 1.4.3 allows any unauthenticated attacker with network access to the PCF SBI interface to cause uncontrolled memory growth by sending repeated HTTP requests to the OAM endpoint. The root cause is a `router.Use()` call inside an HTTP handler that registers a new CORS middleware on every incoming request, permanently growing the Gin router's handler chain. This leads to progressive memory exhaustion and eventual Denial of Service of the PCF, preventing all UEs from obtaining AM and SM policies and blocking 5G session establishment. Version 1.4.3 contains a patch. |
| free5GC is an open-source implementation of the 5G core network. In versions 4.2.1 and below of the UDR service, the handler for creating or updating Traffic Influence Subscriptions checks whether the influenceId path segment equals subs-to-notify, but does not return after sending the HTTP 404 response when validation fails. Execution continues and the subscription is created or overwritten regardless. An unauthenticated attacker with access to the 5G Service Based Interface can create or overwrite arbitrary Traffic Influence Subscriptions, including injecting attacker-controlled notificationUri values and arbitrary SUPIs, by supplying any value for the influenceId path segment. A patched version was not available at the time of publication. |
| WWBN AVideo is an open source video platform. In versions 29.0 and prior, the locale save endpoint (`locale/save.php`) constructs a file path by directly concatenating `$_POST['flag']` into the path at line 30 without any sanitization. The `$_POST['code']` parameter is then written verbatim to that path via `fwrite()` at line 40. An admin attacker (or any user who can CSRF an admin, since no CSRF token is checked and cookies use `SameSite=None`) can traverse out of the `locale/` directory and write arbitrary `.php` files to any writable location on the filesystem, achieving Remote Code Execution. Commit 57f89ffbc27d37c9d9dd727212334846e78ac21a fixes the issue. |
| Vulnerability in the Oracle HTTP Server product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle HTTP Server. While the vulnerability is in Oracle HTTP Server, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle HTTP Server accessible data as well as unauthorized access to critical data or complete access to all Oracle HTTP Server accessible data. CVSS 3.1 Base Score 8.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N). |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.4, a Server-Side Request Forgery (SSRF) vulnerability exists in the Glances IP plugin due to improper validation of the public_api configuration parameter. The value of public_api is used directly in outbound HTTP requests without any scheme restriction or hostname/IP validation. An attacker who can modify the Glances configuration can force the application to send requests to arbitrary internal or external endpoints. Additionally, when public_username and public_password are set, Glances automatically includes these credentials in the Authorization: Basic header, resulting in credential leakage to attacker-controlled servers. This vulnerability can be exploited to access internal network services, retrieve sensitive data from cloud metadata endpoints, and/or exfiltrate credentials via outbound HTTP requests. The issue arises because public_api is passed directly to the HTTP client (urlopen_auth) without validation, allowing unrestricted outbound connections and unintended disclosure of sensitive information. Version 4.5.4 contains a patch. |
| OpenClaude is an open-source coding-agent command line interface for cloud and local model providers. Versions prior to 0.5.1 have a logic flaw in `bashToolHasPermission()` inside `src/tools/BashTool/bashPermissions.ts`. When the sandbox auto-allow feature is active and no explicit deny rule is configured, the function returns an `allow` result immediately — before the path constraint filter (`checkPathConstraints`) is ever evaluated. This allows commands containing path traversal sequences (e.g., `../../../../../etc/passwd`) to bypass directory restrictions entirely. Version 0.5.1 contains a patch for the issue. |
| A heap buffer overflow vulnerability exists in the Netwide Assembler (NASM) due to a lack of bounds checking in the obj_directive() function. This vulnerability can be exploited by a user assembling a malicious .asm file, potentially leading to heap memory corruption, denial of service (crash), and arbitrary code execution. |
