| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Protect against overflow of ALIGN() during iova allocation
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274
iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Cap the automatic alignment to the huge page size, which is probably a
better idea overall. Huge automatic alignments can fragment and chew up
the available IOVA space without any reason. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix oops on non-dbdc mt7986
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986
with MT7975_ONE_ADIE or MT7976_ONE_ADIE.
Commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status") introduced a dereference of the
phys array indirectly indexed by band_idx via wcid->phy_idx in
mt76_wcid_cleanup(). This caused the following Oops on affected
mt7986 devices:
Unable to handle kernel read from unreadable memory at virtual address 0000000000000024
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000
[0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ...
CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0
Hardware name: ZyXEL EX5700 (Telenor) (DT)
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt76_wcid_cleanup+0x84/0x22c [mt76]
lr : mt76_wcid_cleanup+0x64/0x22c [mt76]
sp : ffffffc00a803700
x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00
x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001
x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8
x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000
x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0
x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000
x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28
x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000
x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024
Call trace:
mt76_wcid_cleanup+0x84/0x22c [mt76]
__mt76_sta_remove+0x70/0xbc [mt76]
mt76_sta_state+0x8c/0x1a4 [mt76]
mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e]
drv_sta_state+0x144/0x274 [mac80211]
sta_info_move_state+0x1cc/0x2a4 [mac80211]
sta_set_sinfo+0xaf8/0xc24 [mac80211]
sta_info_destroy_addr_bss+0x4c/0x6c [mac80211]
ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211]
cfg80211_check_station_change+0x1360/0x4710 [cfg80211]
genl_family_rcv_msg_doit+0xb4/0x110
genl_rcv_msg+0xd0/0x1bc
netlink_rcv_skb+0x58/0x120
genl_rcv+0x34/0x50
netlink_unicast+0x1f0/0x2ec
netlink_sendmsg+0x198/0x3d0
____sys_sendmsg+0x1b0/0x210
___sys_sendmsg+0x80/0xf0
__sys_sendmsg+0x44/0xa0
__arm64_sys_sendmsg+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x40/0xd0
el0_svc+0x14/0x4c
el0t_64_sync_handler+0x100/0x110
el0t_64_sync+0x15c/0x160
Code: d2800002 910092c0 52800023 f9800011 (885f7c01)
---[ end trace 7e42dd9a39ed2281 ]---
Fix by using mt76_dev_phy() which will map band_idx to the correct phy
for all hardware combinations. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: check stripe size compatibility on remount as well
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix invalid mr resource destroy
Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr
resources which never got initialized in the first place.
This patch adds the missing check in mlx5_vdpa_destroy_mr_resources()
to block releasing non-initialized mr resources.
Reference trace:
mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned?
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 140216067 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
Code: [...]
RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246
RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000
RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670
R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000
R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea
FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
? __die_body.cold+0x8/0xd
? page_fault_oops+0x134/0x170
? __irq_work_queue_local+0x2b/0xc0
? irq_work_queue+0x2c/0x50
? exc_page_fault+0x62/0x150
? asm_exc_page_fault+0x22/0x30
? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa]
? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa]
genl_family_rcv_msg_doit+0xd9/0x130
genl_family_rcv_msg+0x14d/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
? _copy_to_user+0x1a/0x30
? move_addr_to_user+0x4b/0xe0
genl_rcv_msg+0x47/0xa0
? __import_iovec+0x46/0x150
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x245/0x370
netlink_sendmsg+0x206/0x440
__sys_sendto+0x1dc/0x1f0
? do_read_fault+0x10c/0x1d0
? do_pte_missing+0x10d/0x190
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x5c/0xf0
? __count_memcg_events+0x4f/0xb0
? mm_account_fault+0x6c/0x100
? handle_mm_fault+0x116/0x270
? do_user_addr_fault+0x1d6/0x6a0
? do_syscall_64+0x6b/0xf0
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
entry_SYSCALL_64_after_hwframe+0x78/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the
error_free label and frees the array of bpf_uprobe's without calling
bpf_uprobe_unregister().
This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer
without removing it from the uprobe->consumers list. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: fix kexec crash due to VP assist page corruption
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Require drivers to supply the cache_invalidate_user ops
If drivers don't do this then iommufd will oops invalidation ioctls with
something like:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9
Hardware name: linux,dummy-virt (DT)
pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c)
pc : 0x0
lr : iommufd_hwpt_invalidate+0xa4/0x204
sp : ffff800080f3bcc0
x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0
x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000
x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002
x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80
Call trace:
0x0
iommufd_fops_ioctl+0x154/0x274
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xb4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x190/0x194
All existing drivers implement this op for nesting, this is mostly a
bisection aid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: remove irq disabling in vcn 5 suspend
We do not directly enable/disable VCN IRQ in vcn 5.0.0.
And we do not handle the IRQ state as well. So the calls to
disable IRQ and set state are removed. This effectively gets
rid of the warining of
"WARN_ON(!amdgpu_irq_enabled(adev, src, type))"
in amdgpu_irq_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: fix checks for huge PMDs
Patch series "userfaultfd: fix races around pmd_trans_huge() check", v2.
The pmd_trans_huge() code in mfill_atomic() is wrong in three different
ways depending on kernel version:
1. The pmd_trans_huge() check is racy and can lead to a BUG_ON() (if you hit
the right two race windows) - I've tested this in a kernel build with
some extra mdelay() calls. See the commit message for a description
of the race scenario.
On older kernels (before 6.5), I think the same bug can even
theoretically lead to accessing transhuge page contents as a page table
if you hit the right 5 narrow race windows (I haven't tested this case).
2. As pointed out by Qi Zheng, pmd_trans_huge() is not sufficient for
detecting PMDs that don't point to page tables.
On older kernels (before 6.5), you'd just have to win a single fairly
wide race to hit this.
I've tested this on 6.1 stable by racing migration (with a mdelay()
patched into try_to_migrate()) against UFFDIO_ZEROPAGE - on my x86
VM, that causes a kernel oops in ptlock_ptr().
3. On newer kernels (>=6.5), for shmem mappings, khugepaged is allowed
to yank page tables out from under us (though I haven't tested that),
so I think the BUG_ON() checks in mfill_atomic() are just wrong.
I decided to write two separate fixes for these (one fix for bugs 1+2, one
fix for bug 3), so that the first fix can be backported to kernels
affected by bugs 1+2.
This patch (of 2):
This fixes two issues.
I discovered that the following race can occur:
mfill_atomic other thread
============ ============
<zap PMD>
pmdp_get_lockless() [reads none pmd]
<bail if trans_huge>
<if none:>
<pagefault creates transhuge zeropage>
__pte_alloc [no-op]
<zap PMD>
<bail if pmd_trans_huge(*dst_pmd)>
BUG_ON(pmd_none(*dst_pmd))
I have experimentally verified this in a kernel with extra mdelay() calls;
the BUG_ON(pmd_none(*dst_pmd)) triggers.
On kernels newer than commit 0d940a9b270b ("mm/pgtable: allow
pte_offset_map[_lock]() to fail"), this can't lead to anything worse than
a BUG_ON(), since the page table access helpers are actually designed to
deal with page tables concurrently disappearing; but on older kernels
(<=6.4), I think we could probably theoretically race past the two
BUG_ON() checks and end up treating a hugepage as a page table.
The second issue is that, as Qi Zheng pointed out, there are other types
of huge PMDs that pmd_trans_huge() can't catch: devmap PMDs and swap PMDs
(in particular, migration PMDs).
On <=6.4, this is worse than the first issue: If mfill_atomic() runs on a
PMD that contains a migration entry (which just requires winning a single,
fairly wide race), it will pass the PMD to pte_offset_map_lock(), which
assumes that the PMD points to a page table.
Breakage follows: First, the kernel tries to take the PTE lock (which will
crash or maybe worse if there is no "struct page" for the address bits in
the migration entry PMD - I think at least on X86 there usually is no
corresponding "struct page" thanks to the PTE inversion mitigation, amd64
looks different).
If that didn't crash, the kernel would next try to write a PTE into what
it wrongly thinks is a page table.
As part of fixing these issues, get rid of the check for pmd_trans_huge()
before __pte_alloc() - that's redundant, we're going to have to check for
that after the __pte_alloc() anyway.
Backport note: pmdp_get_lockless() is pmd_read_atomic() in older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a kernel verifier crash in stacksafe()
Daniel Hodges reported a kernel verifier crash when playing with sched-ext.
Further investigation shows that the crash is due to invalid memory access
in stacksafe(). More specifically, it is the following code:
if (exact != NOT_EXACT &&
old->stack[spi].slot_type[i % BPF_REG_SIZE] !=
cur->stack[spi].slot_type[i % BPF_REG_SIZE])
return false;
The 'i' iterates old->allocated_stack.
If cur->allocated_stack < old->allocated_stack the out-of-bound
access will happen.
To fix the issue add 'i >= cur->allocated_stack' check such that if
the condition is true, stacksafe() should fail. Otherwise,
cur->stack[spi].slot_type[i % BPF_REG_SIZE] memory access is legal. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Restore lost return in iommu_report_device_fault()
When iommu_report_device_fault gets called with a partial fault it is
supposed to collect the fault into the group and then return.
Instead the return was accidently deleted which results in trying to
process the fault and an eventual crash.
Deleting the return was a typo, put it back. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT
code path. This should have been removed when we let the page pool
handle the DMA mapping. This bug causes the warning:
WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100
CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu
Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024
RIP: 0010:iommu_dma_unmap_page+0xd5/0x100
Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9
RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c
R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000
R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0
? show_regs+0x6d/0x80
? __warn+0x89/0x150
? iommu_dma_unmap_page+0xd5/0x100
? report_bug+0x16a/0x190
? handle_bug+0x51/0xa0
? exc_invalid_op+0x18/0x80
? iommu_dma_unmap_page+0xd5/0x100
? iommu_dma_unmap_page+0x35/0x100
dma_unmap_page_attrs+0x55/0x220
? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f
bnxt_rx_xdp+0x237/0x520 [bnxt_en]
bnxt_rx_pkt+0x640/0xdd0 [bnxt_en]
__bnxt_poll_work+0x1a1/0x3d0 [bnxt_en]
bnxt_poll+0xaa/0x1e0 [bnxt_en]
__napi_poll+0x33/0x1e0
net_rx_action+0x18a/0x2f0 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: fix panic caused by partcmd_update
We find a bug as below:
BUG: unable to handle page fault for address: 00000003
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 358 Comm: bash Tainted: G W I 6.6.0-10893-g60d6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/4
RIP: 0010:partition_sched_domains_locked+0x483/0x600
Code: 01 48 85 d2 74 0d 48 83 05 29 3f f8 03 01 f3 48 0f bc c2 89 c0 48 9
RSP: 0018:ffffc90000fdbc58 EFLAGS: 00000202
RAX: 0000000100000003 RBX: ffff888100b3dfa0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000002fe80
RBP: ffff888100b3dfb0 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc90000fdbcb0 R11: 0000000000000004 R12: 0000000000000002
R13: ffff888100a92b48 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f44a5425740(0000) GS:ffff888237d80000(0000) knlGS:0000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000100030973 CR3: 000000010722c000 CR4: 00000000000006e0
Call Trace:
<TASK>
? show_regs+0x8c/0xa0
? __die_body+0x23/0xa0
? __die+0x3a/0x50
? page_fault_oops+0x1d2/0x5c0
? partition_sched_domains_locked+0x483/0x600
? search_module_extables+0x2a/0xb0
? search_exception_tables+0x67/0x90
? kernelmode_fixup_or_oops+0x144/0x1b0
? __bad_area_nosemaphore+0x211/0x360
? up_read+0x3b/0x50
? bad_area_nosemaphore+0x1a/0x30
? exc_page_fault+0x890/0xd90
? __lock_acquire.constprop.0+0x24f/0x8d0
? __lock_acquire.constprop.0+0x24f/0x8d0
? asm_exc_page_fault+0x26/0x30
? partition_sched_domains_locked+0x483/0x600
? partition_sched_domains_locked+0xf0/0x600
rebuild_sched_domains_locked+0x806/0xdc0
update_partition_sd_lb+0x118/0x130
cpuset_write_resmask+0xffc/0x1420
cgroup_file_write+0xb2/0x290
kernfs_fop_write_iter+0x194/0x290
new_sync_write+0xeb/0x160
vfs_write+0x16f/0x1d0
ksys_write+0x81/0x180
__x64_sys_write+0x21/0x30
x64_sys_call+0x2f25/0x4630
do_syscall_64+0x44/0xb0
entry_SYSCALL_64_after_hwframe+0x78/0xe2
RIP: 0033:0x7f44a553c887
It can be reproduced with cammands:
cd /sys/fs/cgroup/
mkdir test
cd test/
echo +cpuset > ../cgroup.subtree_control
echo root > cpuset.cpus.partition
cat /sys/fs/cgroup/cpuset.cpus.effective
0-3
echo 0-3 > cpuset.cpus // taking away all cpus from root
This issue is caused by the incorrect rebuilding of scheduling domains.
In this scenario, test/cpuset.cpus.partition should be an invalid root
and should not trigger the rebuilding of scheduling domains. When calling
update_parent_effective_cpumask with partcmd_update, if newmask is not
null, it should recheck newmask whether there are cpus is available
for parect/cs that has tasks. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leaks and crashes while performing a soft reset
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix UAFs when destroying the queues
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: add missing check_func_arg_reg_off() to prevent out-of-bounds memory accesses
Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to
a global function as an argument. The adverse effects of this is that
BPF helpers can continue to make use of this modified
CONST_PTR_TO_DYNPTR from within the context of the global function,
which can unintentionally result in out-of-bounds memory accesses and
therefore compromise overall system stability i.e.
[ 244.157771] BUG: KASAN: slab-out-of-bounds in bpf_dynptr_data+0x137/0x140
[ 244.161345] Read of size 8 at addr ffff88810914be68 by task test_progs/302
[ 244.167151] CPU: 0 PID: 302 Comm: test_progs Tainted: G O E 6.10.0-rc3-00131-g66b586715063 #533
[ 244.174318] Call Trace:
[ 244.175787] <TASK>
[ 244.177356] dump_stack_lvl+0x66/0xa0
[ 244.179531] print_report+0xce/0x670
[ 244.182314] ? __virt_addr_valid+0x200/0x3e0
[ 244.184908] kasan_report+0xd7/0x110
[ 244.187408] ? bpf_dynptr_data+0x137/0x140
[ 244.189714] ? bpf_dynptr_data+0x137/0x140
[ 244.192020] bpf_dynptr_data+0x137/0x140
[ 244.194264] bpf_prog_b02a02fdd2bdc5fa_global_call_bpf_dynptr_data+0x22/0x26
[ 244.198044] bpf_prog_b0fe7b9d7dc3abde_callback_adjust_bpf_dynptr_reg_off+0x1f/0x23
[ 244.202136] bpf_user_ringbuf_drain+0x2c7/0x570
[ 244.204744] ? 0xffffffffc0009e58
[ 244.206593] ? __pfx_bpf_user_ringbuf_drain+0x10/0x10
[ 244.209795] bpf_prog_33ab33f6a804ba2d_user_ringbuf_callback_const_ptr_to_dynptr_reg_off+0x47/0x4b
[ 244.215922] bpf_trampoline_6442502480+0x43/0xe3
[ 244.218691] __x64_sys_prlimit64+0x9/0xf0
[ 244.220912] do_syscall_64+0xc1/0x1d0
[ 244.223043] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 244.226458] RIP: 0033:0x7ffa3eb8f059
[ 244.228582] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8f 1d 0d 00 f7 d8 64 89 01 48
[ 244.241307] RSP: 002b:00007ffa3e9c6eb8 EFLAGS: 00000206 ORIG_RAX: 000000000000012e
[ 244.246474] RAX: ffffffffffffffda RBX: 00007ffa3e9c7cdc RCX: 00007ffa3eb8f059
[ 244.250478] RDX: 00007ffa3eb162b4 RSI: 0000000000000000 RDI: 00007ffa3e9c7fb0
[ 244.255396] RBP: 00007ffa3e9c6ed0 R08: 00007ffa3e9c76c0 R09: 0000000000000000
[ 244.260195] R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffff80
[ 244.264201] R13: 000000000000001c R14: 00007ffc5d6b4260 R15: 00007ffa3e1c7000
[ 244.268303] </TASK>
Add a check_func_arg_reg_off() to the path in which the BPF verifier
verifies the arguments of global function arguments, specifically
those which take an argument of type ARG_PTR_TO_DYNPTR |
MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any
explicit and strict type matching on the supplied register type, so
let's also enforce that a register either type PTR_TO_STACK or
CONST_PTR_TO_DYNPTR is by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: list_lru: fix UAF for memory cgroup
The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or
cgroup_mutex or others which could prevent returned memcg from being
freed. Fix it by adding missing rcu read lock.
Found by code inspection.
[[email protected]: only grab rcu lock when necessary, per Vlastimil] |
