| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix check for probe enabled in kill_kprobe()
In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be
called always fails. This is because before that we set the
KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always
false.
The disarm_kprobe_ftrace() call introduced by commit:
0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
to fix the NULL pointer reference problem. When the probe is enabled, if
we do not disarm it, this problem still exists.
Fix it by putting the probe enabled check before setting the
KPROBE_FLAG_GONE flag. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: socfpga: Fix memory leak in socfpga_gate_init()
Free @socfpga_clk and @ops on the error path to avoid memory leak issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpasim: fix memory leak when freeing IOTLBs
After commit bda324fd037a ("vdpasim: control virtqueue support"),
vdpasim->iommu became an array of IOTLB, so we should clean the
mappings of each free one by one instead of just deleting the ranges
in the first IOTLB which may leak maps. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate BOOT record_size
When the NTFS BOOT record_size field < 0, it represents a
shift value. However, there is no sanity check on the shift result
and the sbi->record_bits calculation through blksize_bits() assumes
the size always > 256, which could lead to NPD while mounting a
malformed NTFS image.
[ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 318.675682] #PF: supervisor read access in kernel mode
[ 318.675869] #PF: error_code(0x0000) - not-present page
[ 318.676246] PGD 0 P4D 0
[ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5
[ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0
[ 318.685623] Call Trace:
[ 318.686607] <TASK>
[ 318.686872] ? ntfs_alloc_inode+0x1a/0x60
[ 318.687235] attr_load_runs_vcn+0x2b/0xa0
[ 318.687468] mi_read+0xbb/0x250
[ 318.687576] ntfs_iget5+0x114/0xd90
[ 318.687750] ntfs_fill_super+0x588/0x11b0
[ 318.687953] ? put_ntfs+0x130/0x130
[ 318.688065] ? snprintf+0x49/0x70
[ 318.688164] ? put_ntfs+0x130/0x130
[ 318.688256] get_tree_bdev+0x16a/0x260
[ 318.688407] vfs_get_tree+0x20/0xb0
[ 318.688519] path_mount+0x2dc/0x9b0
[ 318.688877] do_mount+0x74/0x90
[ 318.689142] __x64_sys_mount+0x89/0xd0
[ 318.689636] do_syscall_64+0x3b/0x90
[ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 318.690318] RIP: 0033:0x7fd9e133c48a
[ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a
[ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0
[ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020
[ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0
[ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff
[ 318.693007] </TASK>
[ 318.693271] Modules linked in:
[ 318.693614] CR2: 0000000000000158
[ 318.694446] ---[ end trace 0000000000000000 ]---
[ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
raw: Fix NULL deref in raw_get_next().
Dae R. Jeong reported a NULL deref in raw_get_next() [0].
It seems that the repro was running these sequences in parallel so
that one thread was iterating on a socket that was being freed in
another netns.
unshare(0x40060200)
r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00')
socket$inet_icmp_raw(0x2, 0x3, 0x1)
pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f)
After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets. However, we should use spinlock for slow paths to avoid
the NULL deref.
Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period. In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.
Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225
seq_read+0x224/0x320 fs/seq_file.c:162
pde_read fs/proc/inode.c:316 [inline]
proc_reg_read+0x23f/0x330 fs/proc/inode.c:328
vfs_read+0x31e/0xd30 fs/read_write.c:468
ksys_pread64 fs/read_write.c:665 [inline]
__do_sys_pread64 fs/read_write.c:675 [inline]
__se_sys_pread64 fs/read_write.c:672 [inline]
__x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x478d29
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29
RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000
R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740
R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: qcom: Fix potential memory leak
Function dwc3_qcom_probe() allocates memory for resource structure
which is pointed by parent_res pointer. This memory is not
freed. This leads to memory leak. Use stack memory to prevent
memory leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/sme: Set new vector length before reallocating
As part of fixing the allocation of the buffer for SVE state when changing
SME vector length we introduced an immediate reallocation of the SVE state,
this is also done when changing the SVE vector length for consistency.
Unfortunately this reallocation is done prior to writing the new vector
length to the task struct, meaning the allocation is done with the old
vector length and can lead to memory corruption due to an undersized buffer
being used.
Move the update of the vector length before the allocation to ensure that
the new vector length is taken into account.
For some reason this isn't triggering any problems when running tests on
the arm64 fixes branch (even after repeated tries) but is triggering
issues very often after merge into mainline. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds
Commit 56124d6c87fd ("fsverity: support enabling with tree block size <
PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read
the file's data, instead of direct pagecache accesses.
An unintended consequence of this is that the
'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became
reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called
on a fd opened with access mode 3, which means "ioctl access only".
Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But
ioctl-only fds are a weird Linux extension that is rarely used and that
few people even know about. (The documentation for FS_IOC_ENABLE_VERITY
even specifically says it requires O_RDONLY.) It's probably not
worthwhile to make the ioctl internally open a new fd just to handle
this case. Thus, just reject the ioctl on such fds for now. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/resctrl: Clear staged_config[] before and after it is used
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags] |
| Cross-site request forgery vulnerability exists in LogStare Collector. If a user views a crafted page while logged, unintended operations may be performed. |
| LogStare Collector improperly handles the password hash data. An administrative user may obtain the other users' password hashes. |
| Twonky Server 8.5.2 on Linux and Windows is vulnerable to an access control flaw. An unauthenticated attacker can bypass web service API authentication controls to leak a log file and read the administrator's username and encrypted password. |
| Type Confusion in V8 in Google Chrome prior to 142.0.7444.175 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| OpenPLC ScadaBR through 0.9.1 on Linux and through 1.12.4 on Windows allows stored XSS via system_settings.shtm. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/type1: prevent underflow of locked_vm via exec()
When a vfio container is preserved across exec, the task does not change,
but it gets a new mm with locked_vm=0, and loses the count from existing
dma mappings. If the user later unmaps a dma mapping, locked_vm underflows
to a large unsigned value, and a subsequent dma map request fails with
ENOMEM in __account_locked_vm.
To avoid underflow, grab and save the mm at the time a dma is mapped.
Use that mm when adjusting locked_vm, rather than re-acquiring the saved
task's mm, which may have changed. If the saved mm is dead, do nothing.
locked_vm is incremented for existing mappings in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fix possible memory leak if device_add() fails
If device_add() returns error, the name allocated by dev_set_name() needs
be freed. As the comment of device_add() says, put_device() should be used
to decrease the reference count in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanp(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: hi846: fix usage of pm_runtime_get_if_in_use()
pm_runtime_get_if_in_use() does not only return nonzero values when
the device is in use, it can return a negative errno too.
And especially during resuming from system suspend, when runtime pm
is not yet up again, -EAGAIN is being returned, so the subsequent
pm_runtime_put() call results in a refcount underflow.
Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid NULL pointer access during management transmit cleanup
Currently 'ar' reference is not added in skb_cb.
Though this is generally not used during transmit completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them
during transmit call for proper usage to avoid NULL pointer dereference.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix zswap writeback race condition
The zswap writeback mechanism can cause a race condition resulting in
memory corruption, where a swapped out page gets swapped in with data that
was written to a different page.
The race unfolds like this:
1. a page with data A and swap offset X is stored in zswap
2. page A is removed off the LRU by zpool driver for writeback in
zswap-shrink work, data for A is mapped by zpool driver
3. user space program faults and invalidates page entry A, offset X is
considered free
4. kswapd stores page B at offset X in zswap (zswap could also be
full, if so, page B would then be IOed to X, then skip step 5.)
5. entry A is replaced by B in tree->rbroot, this doesn't affect the
local reference held by zswap-shrink work
6. zswap-shrink work writes back A at X, and frees zswap entry A
7. swapin of slot X brings A in memory instead of B
The fix:
Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW),
zswap-shrink work just checks that the local zswap_entry reference is
still the same as the one in the tree. If it's not the same it means that
it's either been invalidated or replaced, in both cases the writeback is
aborted because the local entry contains stale data.
Reproducer:
I originally found this by running `stress` overnight to validate my work
on the zswap writeback mechanism, it manifested after hours on my test
machine. The key to make it happen is having zswap writebacks, so
whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do
the trick.
In order to reproduce this faster on a vm, I setup a system with ~100M of
available memory and a 500M swap file, then running `stress --vm 1
--vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens
of minutes. One can speed things up even more by swinging
/sys/module/zswap/parameters/max_pool_percent up and down between, say, 20
and 1; this makes it reproduce in tens of seconds. It's crucial to set
`--vm-stride` to something other than 4096 otherwise `stress` won't
realize that memory has been corrupted because all pages would have the
same data. |
