| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Spring Boot's ArtemisEmbeddedConfigurationFactory uses a fixed, static path for the embedded Artemis message broker's data directory when no explicit path is configured. A local attacker on the same host can pre-create this predictable directory or place a symlink before the application starts.
Affected versions:
Spring Boot 4.0.0 through 4.0.6; 3.5.0 through 3.5.14; 3.4.0 through 3.4.16; 3.3.0 through 3.3.19; 2.7.0 through 2.7.33. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: add data_len bound checks to activation parameter extractors
nci_extract_activation_params_iso_dep() and
nci_extract_activation_params_nfc_dep() read an inner length byte from
the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed
kernel buffers, but neither function receives the caller-validated
activation_params_len. A crafted NCI notification with
activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or
50 (NFC-B) causes memcpy() to read that many bytes past the one valid
byte in the activation params region -- a slab out-of-bounds read of
kernel memory adjacent to the NCI skb.
The sibling nci_extract_rf_params_*() family was given equivalent
protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter
validation for packet data"), but the two activation parameter
extractors were not updated at that time.
Add a data_len parameter to both functions, guard against an empty
region before consuming the inner length byte, decrement the remaining
count after consuming it, and clamp the copy length to what is actually
available. Update both call sites to pass ntf.activation_params_len,
which is already validated against the skb at ntf.c:801. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers
nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain
three related bugs in their TLV parsing loops:
1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data
advances offset past 255 it silently wraps to zero, causing
infinite loops or double-processing of buffer data.
2. Before reading tlv[0] (type) and tlv[1] (length) there is no
check that offset+2 <= tlv_array_len. A truncated TLV causes
an OOB read of one byte past the buffer end.
3. After reading the length field, the value bytes are accessed
without checking offset+2+length <= tlv_array_len. A crafted
length=0xFF on a short buffer causes up to 255 bytes of OOB
read past the buffer end.
Both functions are reachable without authentication via
nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes
directly into nfc_llcp_parse_gb_tlv() with no additional
validation.
Fix all three issues by widening offset from u8 to u16 and adding
bounds checks for both the TLV header and value field before each
access. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: digital: clamp SENSF_RES length to the destination buffer
digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote
NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res
field without an upper-bound check. A nearby malicious NFC-F device can
send an oversized SENSF_RES response to overflow the stack-local struct
nfc_target.
Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: validate attr entry pointer before field access
xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen,
valuelen) before checking if the entry pointer itself is within bounds.
If nameidx is crafted to point near the end of the buffer, these field
accesses can read out-of-bounds before the bounds check at
name_end > buf_end is performed.
Add explicit bounds checks for entry pointers before accessing their
fields. Use offsetof() to check that the start of the flexible array
member (nameval/name) is within bounds, which ensures all preceding
fields are safe to access. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_aml: validate firmware segment lengths
aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.
Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: dummy: Check card index validity at probe
snd_dummy_probe() blindly trusts that the given devptr->id value is
within the proper card index range. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
rndis_host: add overflow check in rndis_rx_fixup()
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer. |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestData. Services that validate WS-Security on the network could therefore accept messages that violate BSP rules, weakening protocol-level checks.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| Tapo
C100/C101 V5 contains a heap-based buffer overflow vulnerability in the RTSP
service. An authenticated attacker on the local network can send specially
crafted RTSP frame data containing oversized length values, resulting in
out-of-bounds heap writes.
Successful
exploitation can crash the RTSP service and trigger a device reboot, resulting
in a temporary denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix out-of-bounds write in nci_target_auto_activated()
nci_target_auto_activated() appends a target to the fixed-size array
ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets
without first checking the array is full; unlike its sibling
nci_add_new_target(), which bails out when n_targets already equals
NCI_MAX_DISCOVERED_TARGETS.
ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC
that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters
NCI_DISCOVERY without clearing the target list) and reports an
auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the
limit. The append then writes a struct nfc_target past the end of the
array (a slab out-of-bounds write), and nfc_targets_found() goes on to
walk the array with the inflated count:
BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci]
Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12
Workqueue: nfc0_nci_rx_wq nci_rx_work [nci]
Call trace:
nci_add_new_protocol+0x94/0x2ac [nci]
nci_ntf_packet+0xddc/0x11a0 [nci]
nci_rx_work+0x15c/0x1e0 [nci]
process_one_work+0x2dc/0x500
worker_thread+0x240/0x460
kthread+0x1c0/0x1d0
ret_from_fork+0x10/0x20
The buggy address belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1024 bytes to the right of
allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)
Guard nci_target_auto_activated() with the same check used by
nci_add_new_target(). |
| HashiCorp go-slug 0.4.0 through 0.18.2 could allow a local attacker to bypass .terraformignore exclusions and cause sensitive files to be included in Terraform slug uploads due to improper handling of Unicode normalization during path matching. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: validate LE Set CIG Parameters response
The Command Complete dispatch validates only the fixed part of the LE Set
CIG Parameters response. After that part is pulled from the skb,
hci_cc_le_set_cig_params() trusts num_handles and reads each entry in the
trailing handle array.
Matching num_handles against the command's num_cis does not guarantee
that the response contains the advertised handles. A truncated response
from a malfunctioning controller can therefore make the handler read
beyond the skb data.
Validate that the remaining skb data contains all advertised handles.
Include this in the existing response validation so malformed responses
also follow the established CIG failure handling. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ATR_REQ length against the received frame
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| crmne/ruby_llm at commit fa6f279847d6d7027814539d9c0dfc3bbdfd2a83 contains a polynomial-time regular expression denial-of-service condition in RubyLLM::Utils.underscore on Ruby 3.1.x. A very long crafted class, agent, or tool name can cause excessive CPU consumption and a denial of service. |
| fast-uri serializes the port component of a URI without validating it. When recomposing the authority, the userinfo and host components are escaped but the port is concatenated verbatim, so a port value that is not a sequence of digits can inject authority delimiters, demoting the intended host to userinfo and pointing the authority at an attacker-controlled host. Both fast-uri and Node's URL read the result back as the attacker's host with no error, so re-validating the built URI does not catch it. This affects applications that build URIs from parts and assign untrusted data to the port component through the serialize, normalize, or equal functions in their object forms. The issue affects fast-uri versions before 2.4.6, from 3.0.0 before 3.1.7, and from 4.0.0 before 4.1.4. It is fixed in 2.4.6, 3.1.7, and 4.1.4, where recomposeAuthority rejects any port that is not a digit sequence per RFC 3986. |
| A vulnerability was detected in valkey-io valkey up to 9.5.4/9.1.0. Affected by this vulnerability is the function createSlotImportJob of the file src/cluster_migrateslots.c of the component Slot Migration. The manipulation of the argument job_name results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 9.0.5 and 9.1.1 addresses this issue. The patch is identified as f4dc3ca09eb650c2fe14060090a41c524eca803f. Upgrading the affected component is advised. |
| fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal. |
