| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in tipc_l2_send_msg()
Syzbot reported a slab-use-after-free in ipvlan_hard_header() when
called from tipc_l2_send_msg().
The root cause is that tipc_disable_l2_media() calls synchronize_net()
while b->media_ptr is still valid. This allows concurrent RCU readers
to obtain the device pointer after synchronize_net() has finished.
The pointer is cleared later in bearer_disable(), but without any
subsequent synchronization, allowing the device to be freed while
still in use by readers.
Fix this by clearing b->media_ptr in tipc_disable_l2_media() before
calling synchronize_net().
This is safe to do now because the call order in bearer_disable()
was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic")
to call tipc_node_delete_links() (which needs the pointer) before
disable_media().
https: //lore.kernel.org/netdev/[email protected]/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)
When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535).
This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535.
However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel.
If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will
be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer
dereference because local TCP packets do not use frag_list.
Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from
ip6_default_advmss() when MTU is large.
Also update the stale comment in ip6_default_advmss() which suggested
that IPV6_MAXPLEN is returned to mean "any MSS". |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Initialize dpi variable to zero
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid displaying the kernel pointer
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <[email protected]> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in same_client_has_lease()
same_client_has_lease() returns an opinfo pointer from ci->m_op_list
after dropping ci->m_lock without taking a reference.
smb_grant_oplock() then dereferences that pointer in copy_lease() and
when checking breaking_cnt. A concurrent close can remove the old lease
from ci->m_op_list and drop the last reference before the caller uses
the returned pointer, leading to a use-after-free.
Take a reference when same_client_has_lease() selects an existing lease,
drop any previous match while scanning, and release the returned
reference in smb_grant_oplock() after copying the lease state. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix race condition on rdma->state in trans_rdma.c
The rdma->state field is modified without holding req_lock in both
recv_done() and p9_cm_event_handler(), while rdma_request() accesses
the same field under the req_lock spinlock. This inconsistent locking
creates a race condition:
- recv_done() running in softirq completion context sets
rdma->state = P9_RDMA_FLUSHING without acquiring req_lock
- p9_cm_event_handler() modifies rdma->state at multiple points
(ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without
req_lock
- rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to
protect the read-modify-write of rdma->state
The race can cause lost state transitions: recv_done() or the CM
event handler could set state to FLUSHING/CLOSED while rdma_request()
is concurrently checking or modifying state under the lock, leading to
the FLUSHING transition being silently overwritten by CLOSING. This
corrupts the connection state machine and can cause use-after-free on
RDMA request objects during teardown.
Fix by adding req_lock protection to all rdma->state modifications in
recv_done() and p9_cm_event_handler(), matching the pattern already
used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore
in the CM event handler since it can race with recv_done() which runs
in softirq context.
Tested with a kernel module that races two threads (simulating
rdma_request and recv_done/CM handler) on rdma->state with proper
locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost
transitions. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt
The null-pointer-guard was incorrect, returning _FAIL on valid pointer.
Invert the guard, so it returns _FAIL on invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: nvec: fix use-after-free in nvec_rx_completed()
In nvec_rx_completed(), when an incomplete RX transfer is detected,
nvec_msg_free() is called to return the message back to the pool by
clearing its 'used' atomic flag. Immediately after this, the code
accesses nvec->rx->data[0] to check the message type.
Since nvec_msg_free() marks the pool slot as available via atomic_set(),
any concurrent or subsequent call to nvec_msg_alloc() could claim that
same slot and overwrite its data[] array. Reading nvec->rx->data[0] after
freeing the message is therefore a use-after-free.
Fix this by saving the message type byte before calling nvec_msg_free(),
then using the saved value for the battery quirk check. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
The original implementation caused an out-of-bounds memory access
in the sdw_add_element_group_count for-loop when i == num.
for (i = 0; i <= num; i++) {
if (rate == group->rates[i] && lane == group->lanes[i])
...
To fix this error, the function now checks for existing rate/lane
entries in the group(a function parameter) using a for-loop before
adding them.
No functional changes apart from this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Check ROM header and data structure addr before accessing
We meet a crash when running stress-ng on x86_64 machine:
BUG: unable to handle page fault for address: ffa0000007f40000
RIP: 0010:pci_get_rom_size+0x52/0x220
Call Trace:
<TASK>
pci_map_rom+0x80/0x130
pci_read_rom+0x4b/0xe0
kernfs_file_read_iter+0x96/0x180
vfs_read+0x1b1/0x300
Our analysis reveals that the ROM space's start address is
0xffa0000007f30000, and size is 0x10000. Because of broken ROM space,
before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is
already pointed to the ROM space end, invoking readl() would read 4 bytes
therefore cause an out-of-bounds access and trigger a crash. Fix this by
adding image header and data structure checking.
We also found another crash on arm64 machine:
Unable to handle kernel paging request at virtual address ffff8000dd1393ff
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
The call trace is the same with x86_64, but the crash reason is that the
data structure addr is not aligned with 4, and arm64 machine report
"alignment fault". Fix this by adding alignment checking.
[bhelgaas: shorten function names, wrap comments] |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-adsp: fix UAF during device teardown
When the SOF audio driver fails to initialize (e.g. firmware boot
timeout), its devres unwind frees the snd_sof_dev object that the
mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback.
The mtk-adsp-mailbox shutdown clears the mailbox command registers
but leaves the IRQ line unmasked, so a late interrupt can still
queue a threaded handler after mbox_free_channel() had cleared
chan->cl, and mbox_chan_received_data() would then trigger UAF:
BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version
sof_ipc3_validate_fw_version
sof_ipc3_do_rx_work
sof_ipc3_rx_msg
mt8196_dsp_handle_request
mtk_adsp_ipc_recv
mbox_chan_received_data
mtk_adsp_mbox_isr
irq_thread_fn
Freed by task ...:
kfree
devres_release_all
really_probe
... (sof-audio-of-mt8196 probe failure)
The crash was observed roughly three seconds after the failed probe.
disable_irq() in shutdown and enable_irq() in startup. disable_irq()
also waits for any in-flight interrupts, so by the time
mbox_free_channel() proceeds to clear chan->cl no rx_callback can run.
In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked
between probe and the first client bind — otherwise an early interrupt
can crash on chan->cl == NULL in mbox_chan_received_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: platform: defer connection counter increment until alloc succeeds
coresight_add_out_conn() increments nr_outconns before calling
devm_krealloc_array() and again before devm_kmalloc(). If either
allocation fails, the counter is already bumped while the corresponding
array entry is NULL or uninitialized garbage.
coresight_add_in_conn() has the same problem with nr_inconns and
devm_krealloc_array().
In both cases the probe returns -ENOMEM, which causes
coresight_get_platform_data() to call coresight_release_platform_data()
for cleanup. That function iterates up to nr_outconns (or nr_inconns)
entries and dereferences each pointer unconditionally, hitting the NULL
or garbage entry and panicking instead of failing gracefully.
Fix by moving the counter increments to after all allocations succeed,
so the struct is always consistent on any error path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
