| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: properly indicate failure when ending a failed write request
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix addr error caused by page alignment
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_skbmod: Skip non-Ethernet packets
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2
protocol, which is not always the case. As an example, for CAN devices:
$ ip link add dev vcan0 type vcan
$ ip link set up vcan0
$ tc qdisc add dev vcan0 root handle 1: htb
$ tc filter add dev vcan0 parent 1: protocol ip prio 10 \
matchall action skbmod swap mac
Doing the above silently corrupts all the packets. Do not perform skbmod
actions for non-Ethernet packets. |
| A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument topicurl with the input showSyslog leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in TOTOLINK A720R 4.1.5cu.374. It has been classified as problematic. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Config Handler. The manipulation of the argument topicurl with the input getInitCfg/getSysStatusCfg leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| Information exposure in the PMB platform affecting versions 4.2.13 and earlier. This vulnerability allows an attacker to upload a file to the environment and enumerate the internal files of a machine by looking at the request response. |
| In Eclipse Openj9 before version 0.35.0, interface calls can be inlined without a runtime type check. Malicious bytecode could make use of this inlining to access or modify memory via an incompatible type. |
| An improper input validation vulnerability in the TLS certificate generation function allows an attacker to cause a Denial-of-Service (DoS) condition which can only be reverted via a factory reset. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0. |
| The popup-builder plugin before 3.64.1 for WordPress allows information disclosure and settings modification, leading to in-scope privilege escalation via admin-post actions to com/classes/Actions.php. By sending a POST request to wp-admin/admin-post.php, an authenticated attacker with minimal (subscriber-level) permissions can modify the plugin's settings to allow arbitrary roles (including subscribers) access to plugin functionality by setting the action parameter to sgpbSaveSettings, export a list of current newsletter subscribers by setting the action parameter to csv_file, or obtain system configuration information including webserver configuration and a list of installed plugins by setting the action parameter to sgpb_system_info. |
| Apache Flume versions 1.4.0 through 1.10.1 are vulnerable to a remote code execution (RCE) attack when a configuration uses a JMS Source with an unsafe providerURL. This issue is fixed by limiting JNDI to allow only the use of the java protocol or no protocol. |
| An information disclosure vulnerability in Brocade Fabric OS CLI before Brocade Fabric OS v9.1.0, 9.0.1e, 8.2.3c, 8.2.0cbn5, 7.4.2.j could allow a local authenticated attacker to read sensitive files using switch commands “configshow” and “supportlink”. |
| In affected versions of Octopus Server it is possible to reveal the existence of resources in a space that the user does not have access to due to verbose error messaging. |
| Stimulsoft (aka Stimulsoft Reports) 2013.1.1600.0, when Compilation Mode is used, allows an attacker to execute arbitrary C# code on any machine that renders a report, including the application server or a user's local machine, as demonstrated by System.Diagnostics.Process.Start. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
There is no visible indication when the system is recording and recording can be enabled remotely via a network API.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| The Download Manager and Payment Form WordPress Plugin – WP SmartPay plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions 1.1.0 to 2.7.13 via the show() function due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Subscriber-level access and above, to view other user's data like email address, name, and notes. |
| phpgt/Dom provides access to modern DOM APIs. Versions of phpgt/Dom prior to 4.1.8 expose the GITHUB_TOKEN in the Dom workflow run artifact. The ci.yml workflow file uses actions/upload-artifact@v4 to upload the build artifact. This artifact is a zip of the current directory, which includes the automatically generated .git/config file containing the run's GITHUB_TOKEN. Seeing as the artifact can be downloaded prior to the end of the workflow, there is a few seconds where an attacker can extract the token from the artifact and use it with the GitHub API to push malicious code or rewrite release commits in your repository. Any downstream user of the repository may be affected, but the token should only be valid for the duration of the workflow run, limiting the time during which exploitation could occur. Version 4.1.8 fixes the issue. |
| Observable discrepancies in the login process allow an attacker to guess legitimate user names registered in the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0. |
| plugins/gtk+/glade-gtk-box.c in GNOME Glade before 3.38.1 and 3.39.x before 3.40.0 mishandles widget rebuilding for GladeGtkBox, leading to a denial of service (application crash). |
| Jenkins HTML Publisher Plugin 1.16 through 1.32 (both inclusive) does not properly sanitize input, allowing attackers with Item/Configure permission to implement cross-site scripting (XSS) attacks and to determine whether a path on the Jenkins controller file system exists. |
|
The application allowed for Unauthenticated User Enumeration by interacting with an unsecured endpoint to retrieve information on each account within the system.
|
