| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f8d ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator. |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
block: avoid to reuse `hctx` not removed from cpuhp callback list
If the 'hctx' isn't removed from cpuhp callback list, we can't reuse it,
otherwise use-after-free may be triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In IMS, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ... |
| An out-of-bounds read in the ParseIP6Extended function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()
In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Release the label when replacing existing ct entry
Cited commit doesn't release the label mapping when replacing existing ct
entry which leads to following memleak report:
unreferenced object 0xffff8881854cf280 (size 96):
comm "kworker/u48:74", pid 23093, jiffies 4296664564 (age 175.944s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000002722d368>] __kmalloc+0x4b/0x1c0
[<00000000cc44e18f>] mapping_add+0x6e8/0xc90 [mlx5_core]
[<000000003ad942a7>] mlx5_get_label_mapping+0x66/0xe0 [mlx5_core]
[<00000000266308ac>] mlx5_tc_ct_entry_create_mod_hdr+0x1c4/0xf50 [mlx5_core]
[<000000009a768b4f>] mlx5_tc_ct_entry_add_rule+0x16f/0xaf0 [mlx5_core]
[<00000000a178f3e5>] mlx5_tc_ct_block_flow_offload_add+0x10cb/0x1f90 [mlx5_core]
[<000000007b46c496>] mlx5_tc_ct_block_flow_offload+0x14a/0x630 [mlx5_core]
[<00000000a9a18ac5>] nf_flow_offload_tuple+0x1a3/0x390 [nf_flow_table]
[<00000000d0881951>] flow_offload_work_handler+0x257/0xd30 [nf_flow_table]
[<000000009e4935a4>] process_one_work+0x7c2/0x13e0
[<00000000f5cd36a7>] worker_thread+0x59d/0xec0
[<00000000baed1daf>] kthread+0x28f/0x330
[<0000000063d282a4>] ret_from_fork+0x1f/0x30
Fix the issue by correctly releasing the label mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.
Found by a modified version of syzkaller.
BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well.
Fix the error code of return to mark the ACPI SAR table as invalid.
[ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0
[ 5.077381] BUG: kernel NULL pointer dereference, address:
0000000000000004
[ 5.077630] #PF: supervisor read access in kernel mode
[ 5.077883] #PF: error_code(0x0000) - not-present page
[ 5.078138] PGD 0 P4D 0
[ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220
[mt7921_common]
...
[ 5.080786] Call Trace:
[ 5.080786] <TASK>
[ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common]
[ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e]
[ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e]
[ 5.080786] local_pci_probe+0x47/0x90
[ 5.080786] pci_call_probe+0x55/0x190
[ 5.080786] pci_device_probe+0x84/0x120 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Fix for shift-out-of-bounds
Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.
...
[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[ 6.120687] Call Trace:
[ 6.120690] <TASK>
[ 6.120694] dump_stack_lvl+0x48/0x70
[ 6.120704] dump_stack+0x10/0x20
[ 6.120707] ubsan_epilogue+0x9/0x40
[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[ 6.120720] ? psi_group_change+0x25f/0x4b0
[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh]
[ 6.120739] get_input_rep+0x57/0x340 [amd_sfh]
[ 6.120748] ? __schedule+0xba7/0x1b60
[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[ 6.120772] process_one_work+0x229/0x430
[ 6.120780] worker_thread+0x4a/0x3c0
[ 6.120784] ? __pfx_worker_thread+0x10/0x10
[ 6.120788] kthread+0xf7/0x130
[ 6.120792] ? __pfx_kthread+0x10/0x10
[ 6.120795] ret_from_fork+0x29/0x50
[ 6.120804] </TASK>
...
Fix this by adding the condition to validate shift ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix possible double unlock when moving a directory |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp-2221: prevent UAF in delayed work
If the device is plugged/unplugged without giving time for mcp_init_work()
to complete, we might kick in the devm free code path and thus have
unavailable struct mcp_2221 while in delayed work.
Canceling the delayed_work item is enough to solve the issue, because
cancel_delayed_work_sync will prevent the work item to requeue itself. |
