| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: use physical alignment for vmemmap_start_pfn
RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to
VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the
physical-address domain.
Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size")
attempted to account for the maximal folio alignment by feeding
MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However,
MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage,
whereas VMEMMAP_ADDR_ALIGN is used to align a physical address.
The mask-based compound_info encoding requires pfn_to_page(0) to be
naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa
("mm/sparse: check memmap alignment for compound_info_has_mask()") added a
check for that requirement and exposed the unit mismatch on systems such
as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES *
PAGE_SIZE.
Here is the log:
[ 0.000000][ C0] ------------[ cut here ]------------
[ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0
[ 0.000000][ C0] Modules linked in:
[ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT
[ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe
[ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe
[ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30
[ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000
[ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0
[ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000
[ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000
[ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000
[ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000
[ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00
[ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0
[ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20
[ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000
[ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003
[ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe
[ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30
[ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848
Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment
before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing
round_down() logic while making the resulting vmemmap base satisfy the
mask-alignment requirement. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller
mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq
cookie), but mtk_poll_controller incorrectly passed the net_device *.
Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled
would then crash. |
| Improper conditions check in the firmware for the Intel(R) NPU Driver for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 26.5 and iPadOS 26.5. A malicious app may be able to enumerate installed apps. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to gain elevated privileges due to a format string vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix potential UAF in aa_replace_profiles
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: npc: Fix size of entry2cntr_map
KASAN prints below splat. This is caused by allocating counter for
reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map
is not allocated for reserved entries.
BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0
Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14
CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1
Hardware name: Marvell CN106XX board (DT)
Workqueue: events work_for_cpu_fn
Call trace:
dump_backtrace.part.0+0xe4/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x88/0xb4
print_report+0x154/0x458
kasan_report+0xb8/0x194
__asan_store2+0x7c/0xa0
npc_map_mcam_entry_and_cntr+0xb0/0x1a0
rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280
npc_install_flow+0x840/0xfe0
rvu_npc_install_cpt_pass2_entry+0x138/0x190
rvu_nix_init+0x148c/0x2880
rvu_probe+0x1800/0x30b0
local_pci_probe+0x78/0xe0
work_for_cpu_fn+0x30/0x50
process_one_work+0x4cc/0x97c
worker_thread+0x360/0x630
kthread+0x1a0/0x1b0
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/test: Fix __fortify_panic
Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it
is potentially overflowing the xormaps array per __counted_by(nr_maps).
Quiet the false positive by initializing @nr_maps earlier.
memcpy: detected buffer overflow: 32 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728
Call Trace:
__fortify_panic+0xd/0xf
setup_xor_mapping+0x6c/0xa0 [cxl_translate]
[ dj: Fixed up @nr_entries to @nr_maps in commit log. ] |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, MPESW, Fix missing complete() on devcom error
mlx5_mpesw_work() returned without calling complete() when
mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the
work and waited on mpesww->comp would block indefinitely.
Funnel the early-return path through a new "complete" label so the
waiter is always woken. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident attribute lists and harden the validator
A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list()
only on the non-resident path; ntfs_read_locked_inode() copies a *resident*
attribute list into ni->attr_list with a plain memcpy() and no validation
at all. Every subsequent walk of ni->attr_list --
ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and
ntfs_attrlist_need() -- then trusts the entries are well-formed and reads
attr_list_entry fixed-header fields
(lowest_vcn at offset 8, mft_reference at offset 16, and the name) with
bounds that assume validation already happened. A crafted resident
attribute list therefore reaches those walks unvalidated and can drive
out-of-bounds reads of the attribute-list buffer.
load_attribute_list() itself reads ale->name_offset (offset 7),
ale->mft_reference (offset 16) and the name length under only an
"al < al_start + size" bound, so its own validation loop can over-read the
fixed header of a truncated trailing entry by a few bytes.
Factor the per-entry validation into ntfs_attr_list_entry_is_valid(),
which requires each entry's fixed header (offsetof(struct
attr_list_entry, name)) to be in range before any field is dereferenced,
that ale->length is a multiple of 8 covering the fixed header plus the
name, and that the entry is in use and carries a live MFT reference.
ntfs_attr_list_is_valid() walks the buffer with it and checks the entries
tile it exactly. Use the list validator in load_attribute_list()
(replacing the open-coded loop, closing its own over-read) and on the
resident path in ntfs_read_locked_inode() (which previously skipped
validation entirely); patches 2/3 reuse the per-entry helper at the other
two attribute-list walks. |
| Improper access control for some Intel(R) Processors within Ring 3: User Applications may allow an escalation of privilege. Simple hardware adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper access control in the firmware for some in Alias Checking Trusted Module for some Intel(R) Xeon(R) processors may allow an escalation of privilege. Startup code and SMM adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| Improper input validation for some Intel(R) Neural Compressor software before version v3.7 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper privilege management in Regional Capabilities in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted Chrome extension. (Chromium security severity: Medium) |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, processPercentageRoyaltiesTransfer in core/kapp/accounts/accounts.go calls SubFromBalance after the split loop and after the royaltiesToPay <= 0 early return. computeSplitRoyalties rejects only when splitToPay > royaltiesToPay, so a valid PercentTransferPercentage = 10000 split consumes exactly 100 percent of the royalty pool, sets royaltiesToPay to zero, and returns before the source account is debited. The split recipient receives the full royaltyAmount while the sender pays nothing and the supply counter is not updated, allowing unbounded off-the-books inflation of the transferred KDA. A KDA owner must configure a TransferPercentage royalty with a 100 percent split, after which any holder's transfer of the asset triggers the mint; the sibling processFixedRoyaltiesTransfer path is not affected because it debits the source before distribution. This issue is fixed in version 1.7.19. |
| Uninitialized resource in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| A flaw was found in the Dynamic Client Registration (DCR) component of Keycloak, an identity and access management solution. The default DCR policy fails to properly validate the claim path for User Property mappers, allowing them to write values to sensitive internal claim locations. An attacker with a standard user account and a limited Initial Access Token can exploit this to forge administrative roles in their access token. This allows the attacker to take over other clients, steal confidential secrets, and potentially gain full administrative control over the realm. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: handle missing status supplier
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors. |
| A flaw was found in Undertow. Servlets using a method that calls HttpServletRequestImpl.getParameterNames() can cause an OutOfMemoryError when the client sends a request with large parameter names. This issue can be exploited by an unauthorized user to cause a remote denial-of-service (DoS) attack. |
