| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| A security vulnerability has been detected in RooCodeInc Roo-Code up to 3.51.1. This affects the function fetch_instructions of the file malicious_mcp_server.py of the component MCP Integration Trust Model. The manipulation leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. |
| The WPMU DEV Dashboard plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.0.1. This is due to inconsistent and ambiguous HMAC message construction between the unauthenticated `wdpsso_step1` and `wdpsso_step2` AJAX actions, where step 1 signs and discloses an unseparated concatenation of the token, state, redirect, and domain values, while step 2 verifies an unseparated concatenation that omits the domain field. This makes it possible for unauthenticated attackers, on sites connected to WPMU DEV with Hub SSO enabled and mapped to an administrator, to obtain a valid HMAC from step 1 and replay it to step 2 by moving the domain value into the redirect field, resulting in an authenticated administrator session. |
| tamguo 1.5.3 is vulnerable to Unrestricted File Upload Leading to Stored XSS. The /uploadFile and /imgUpload endpoints in FileUploadController.java and UEditorController.java have no file type validation. Attackers can upload arbitrary HTML/JavaScript files to the server. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish GC-visible tuple last
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix refcount race between list:set GC and swap
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: lib: Fix ZBB strnlen reading past count boundary
The ZBB-optimized strnlen loop loads one word ahead before checking the
aligned boundary:
REG_L t1, SZREG(t0) // load next word
addi t0, t0, SZREG // advance
orc.b t1, t1
bgeu t0, t4, 4f // boundary check AFTER load
where t4 = (s + count) & -SZREG. When s is aligned and count is a
multiple of SZREG, t4 equals s + count and the loop loads a full word
starting at exactly s + count. If s + count falls on a page boundary
with the next page unmapped, this faults.
Fix by computing the aligned boundary from the last valid byte
(s + count - 1) instead of s + count. This makes the loop stop at the
word containing the last valid byte rather than potentially loading the
word after it. The count == 0 case is already handled by the beqz
early exit.
Also add a pre-loop guard (bgeu t0, t4) for the case where all valid
bytes fit within the first word. With the adjusted boundary, t4 can
equal t0, and entering the loop with stale register state from the
first-word processing would produce incorrect results.
The final minu clamp ensures the result is still correct when the last
loaded word extends past s + count - 1 within the same aligned word. |
| An issue in the CreateUEContext handler component of free5gc v4.1.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted request. |
| A reachable assertion vulnerability in the /nsmf-pdusession/v1/sm-contexts component of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted DELETE request. |
| A NULL pointer dereference in the AMF NGAP Dispatcher component of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via supplying crafted NGAP messages during the initialization of a new RAN connection. |
| A cross-site scripting (XSS) vulnerability in Support chatbot in Nopaperforms Niaa-Chatbot through 2022-05-17 allows remote attackers to inject arbitrary web script or HTML via the Enter email parameter. |
| An arbitrary file upload vulnerability in the /v1/my_drive/batch_upload component of cohere North AI v1.1.5 allows attackers to exeute arbitrary code via uploading a crafted file. |
| WatchGuard Dimension contains an authenticated SQL injection vulnerability in the log viewer feature which allows an authenticated user with report administration permissions gain arbitrary command execution as the Dimension WebUI process user by sending specially crafted requests. |
| Ignition by Inductive Automation, when installed with default OS service
account settings, may expose the host system to an elevated code
execution risk via the gateway backup restore functionality. An
authenticated user with Gateway Administrator privileges can import a
malicious gateway backup (.gwbk) file containing crafted project
resources, scripts, or modules, resulting in code execution on the host
system. This affects both Windows and Linux installations. On Windows,
default installations often run the Ignition service as NT
AUTHORITY\SYSTEM, resulting in code execution with full local system
privileges. On Linux, default installations commonly run the Ignition
service as root or with elevated privileges. Specific privilege level
depends on installation configuration. |
| Substance3D - Sampler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
