| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_skcipher - force synchronous processing on trees without ctx->state
The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv
directly into the skcipher request. After io_submit() the socket lock is
dropped and the request is processed asynchronously, so a concurrent
sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request
run under an attacker-controlled IV. For CTR/stream modes this is
IV/keystream reuse and lets an unprivileged user recover the plaintext of
a concurrent operation.
Snapshotting ctx->iv into per-request storage for the async path is not
sufficient. For ciphers with statesize == 0 - which includes cbc and ctr -
the MSG_MORE inter-chunk IV chaining is carried solely by the in-place
req->iv writeback, which a snapshot redirects into per-request memory that
af_alg_free_resources() releases on completion, silently producing wrong
output. Writing the IV back from the completion callback instead is not
possible either: that would require lock_sock() there, but the callback can
run in softirq/atomic context, so it must not sleep.
Make the operation synchronous instead, which removes both the IV race and
any writeback race. This is equivalent to the upstream resolution, commit
fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the
AIO socket path across net/ entirely and so produces the same end state for
this file. This patch deviates from that commit deliberately: rather than
removing AIO socket support tree-wide, which would be far too invasive for
stable, it removes only the AIO branch in crypto/algif_skcipher.c.
io_submit() now completes synchronously; AF_ALG async is rarely used in
practice.
The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless,
and is left alone to keep the fix minimal.
Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000
after the change; MSG_MORE chunked CTR output bit-identical to single-shot. |
| An issue in ACME mini_httpd 1.30 and prior allows a remote attacker to cause a denial of service via the HTTP request header parser in the handle_request() function |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
netdev-genl: report NAPI thread PID in the caller's pid namespace
netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID
using task_pid_nr(), which returns the PID in the initial pid namespace.
NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family
is netnsok, so a caller in a child pid namespace can issue it. That caller
then sees the kthread's global PID, even though the kthread is not visible
in its pid namespace, where the value should be 0.
Translate the PID through the caller's pid namespace, the same way commit
3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's
pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both
run synchronously in the caller's context, so task_active_pid_ns(current) is
the caller's pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix refcount leak in nvmet_sq_create()
In nvmet_sq_create(), a reference on the ctrl is taken
via kref_get_unless_zero() before calling nvmet_check_sqid().
If nvmet_check_sqid() fails, the function returns the error
directly without releasing the reference, leading to a leak.
Fix this by jumping to the "ctrl_put" label, which already
performs the necessary nvmet_ctrl_put(ctrl). This ensures the
reference is properly released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix stack info leak in RME Digiface status
snd_rme_digiface_read_status() reads a four-word status block from the
device into an uninitialised on-stack __le32 buf[4] and, whenever the
vendor control-IN transfer does not return a negative error, copies all
four words into the caller's status[].
snd_usb_ctl_msg() copies the full requested size back into the caller's
buffer regardless of how many bytes the data stage actually delivered:
buf = kmemdup(data, size, GFP_KERNEL);
err = usb_control_msg(dev, pipe, request, requesttype,
value, index, buf, size, timeout);
memcpy(data, buf, size);
usb_control_msg() returns the transferred length on a short control-IN,
which is a non-negative value, and writes only that many bytes. The
remainder of the copy back is the kmemdup()ed image of the caller's
buffer, so a device answering with a short data stage leaves the
trailing words of buf[] holding leftover kernel stack. The only guard
in the caller is err < 0, so those words are stored into status[].
They then reach user space: snd_rme_digiface_get_status_val() selects a
16-bit halfword of status[] per the control's reg/mask, and the eight
Digiface status controls together expose the whole 16-byte frame to an
unprivileged reader of /dev/snd/controlC*.
Zero-initialise the buffer so a short read yields zeros instead of stack
residue. This mirrors snd_rme_get_status1(), which already clears its
output word before the same kind of vendor read.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| Emlog is an open source website building system. In 2.6.26 and earlier, install.php accepts action=reinstall without authentication and deliberately skips the already-installed check because the guard runs only when $act != 'reinstall'. A remote attacker can submit hostname, dbuser, dbpasswd, dbname, dbprefix, username, password, and email values to cause file_put_contents('config.php', $config) to overwrite the configuration with attacker-controlled database settings and create a new administrator account. No fixed version is available as of this review. |
| CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, error paths reflect raw upstream response bodies and internal exception messages back to the caller instead of a sanitized, generic message. When the server is pointed at (or redirected/SSRF'd to) a host that returns a non-CKAN response, or when an internal exception occurs, the caller receives verbatim upstream content and internal detail (hostnames, internal IPs, DB errors, stack fragments). This vulnerability is fixed in 0.4.112. |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, internal/cluster-gateway/server.go exposed /api/proxy/, /api/exec/, and /api/wirelogs/ on an internal listener without requiring a client certificate or token, allowing any network-reachable caller to read tenant Kubernetes Secrets, mutate workloads, and execute commands across connected data planes. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2. |
| FreePBX is an open source IP PBX. Prior to 17.0.9, the UCP Node server on ports 8001 and 8003 uses io.use(checkAuth) in node/lib/server.js, but Socket.IO version 4 applies that middleware only to the default namespace. An unauthenticated client can connect to custom namespaces that do not consistently invoke checkAuth in node/lib/auth.js and send crafted event values containing carriage-return or newline characters through the Asterisk Manager Interface action path patched by node/lib/asterisk-manager-patch.js, allowing arbitrary commands to execute as the asterisk service user. This issue is fixed in version 17.0.9. |
| FreePBX is an open source IP PBX. Prior to 16.0.6 and 17.0.5.4, the FreePBX Text-To-Speech module allows an authenticated administrator to save a TTS destination name that is HTML-encoded for storage, decoded during dialplan generation, passed as an AGI argument, and used to build filenames inside agi-bin/propolys-tts.agi. The TTS destination name reaches a raw shell-command execution path, allowing arbitrary operating-system command execution as the asterisk service user. This issue is fixed in versions 16.0.6 and 17.0.5.4. |
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. Prior to 4.5.2, addGoogleStrategy() in apps/webapp/app/services/googleAuth.server.ts passes a Google profile email to findOrCreateGoogleUser() in apps/webapp/app/models/user.server.ts without requiring Google's email_verified assertion. When existingEmailUser && !existingUser is true, the flow writes the new Google authIdentifier into the existing email-matched account and returns that user object, allowing an attacker-controlled Google profile with an unverified matching email to take over the account. This issue is fixed in version 4.5.2. |
| SVGO, short for SVG Optimizer, is a Node.js library and command-line application for optimizing SVG files. From version 1.0.0 until versions 2.8.3, 3.3.4, and 4.0.2, the removeScripts plugin, named removeScriptElement in versions 1 through 3, can leave executable content in optimized SVGs because it does not remove namespaced or prefixed script elements such as <svg:script> and, in versions 3 and 4, matches JavaScript URIs case sensitively. Applications that process untrusted SVG input with this plugin enabled and serve the result can allow scripts to execute when another user opens the SVG, exposing local storage or cookies. This issue is fixed in versions 2.8.3, 3.3.4, and 4.0.2. |
| OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.2, the SASL PLAIN authorization identity path in opendj-server-legacy/src/main/java/org/opends/server/extensions/PlainSASLMechanismHandler.java checked the PROXIED_AUTH privilege but did not evaluate the mayProxy proxy ACI scope when an authzid resolved to a different user. Both dn: and u: or bare authzid forms could therefore let an authenticated account holding PROXIED_AUTH assume any resolvable non-root identity outside the identities permitted by its proxy ACI. The fix returns INVALID_CREDENTIALS (49) before password verification when the target authorization identity is not permitted. This issue is fixed in version 5.1.2. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21. |
| Hub is a Node.js WebSocket server and client with added features. Prior to 0.2.16, every incoming unauthenticated WebSocket connection triggers loadDefaultConnectionEventListeners to call requestClientId, which calls rpc.send for the get-client-id action and pushes a request into RPC.requests. The RPC.waitForReply function starts a setInterval polling loop every 10 milliseconds that is cleared only after a matching reply; if the client remains silent and closes, the timer and pending request stay allocated because the socket close path does not cancel them. Repeated connections therefore cause unbounded timers and heap entries, exhausting CPU and memory and making the server unavailable. This issue is fixed in version 0.2.16. |
| phpList before 3.7.0-RC5 contains a cross-site request forgery (CSRF) vulnerability in lists/admin/admins.php. The administrator deletion action is triggered via an unauthenticated GET request (?page=admins&delete=N) that is not protected by a CSRF token (the central verifyCsrfGetToken check uses enforce=false and is bypassed when the token parameter is absent). A remote attacker can trick a logged-in super-administrator into loading a crafted URL (e.g., embedded as an image in an email) to delete any non-self administrator account. |
| NextAuth.js provides authentication for Next.js. From next-auth 5.0.0-beta.0 until 5.0.0-beta.32, applications that gate access by checking only for the existence of the auth object returned by the auth() wrapper can fail open when Auth.js has a server configuration error. In middleware, Route Handlers, React Server Components, and other auth() entry points, a non-OK session response is parsed into a truthy error object instead of null, so checks such as !!auth and if (req.auth) evaluate to true for unauthenticated requests. A provider missing both the issuer and authorization endpoint triggers InvalidEndpoints, and an unset AUTH_SECRET or another server configuration error can produce the same behavior. There is no impact while configuration is valid, but after a deployment becomes misconfigured, routes protected only by session existence silently grant access to every visitor. This issue is fixed in next-auth 5.0.0-beta.32. |
