| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()
The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add
dev_kfree_skb() to fix it. Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589464ac7 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stream: purge sk_error_queue in sk_stream_kill_queues()
Changheon Lee reported TCP socket leaks, with a nice repro.
It seems we leak TCP sockets with the following sequence:
1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket.
Each ACK will cook an skb put in error queue, from __skb_tstamp_tx().
__skb_tstamp_tx() is using skb_clone(), unless
SOF_TIMESTAMPING_OPT_TSONLY was also requested.
2) If the application is also using MSG_ZEROCOPY, then we put in the
error queue cloned skbs that had a struct ubuf_info attached to them.
Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc()
does a sock_hold().
As long as the cloned skbs are still in sk_error_queue,
socket refcount is kept elevated.
3) Application closes the socket, while error queue is not empty.
Since tcp_close() no longer purges the socket error queue,
we might end up with a TCP socket with at least one skb in
error queue keeping the socket alive forever.
This bug can be (ab)used to consume all kernel memory
and freeze the host.
We need to purge the error queue, with proper synchronization
against concurrent writers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
It is possible that skb is freed in ath9k_htc_rx_msg(), then
usb_submit_urb() fails and we try to free skb again. It causes
use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes
NULL but rx_buf is not freed and there can be a memory leak.
The patch removes unnecessary nskb and makes skb processing more clear: it
is supposed that ath9k_htc_rx_msg() either frees old skb or passes its
managing to another callback function.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: avoid possible NULL deref in skb_clone()
syzbot got a crash [1] in skb_clone(), caused by a bug
in hsr_get_untagged_frame().
When/if create_stripped_skb_hsr() returns NULL, we must
not attempt to call skb_clone().
While we are at it, replace a WARN_ONCE() by netdev_warn_once().
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641
Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00
RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000
RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000
RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140
R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640
R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620
FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164
hsr_forward_do net/hsr/hsr_forward.c:461 [inline]
hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623
hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69
__netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379
__netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483
__netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599
netif_receive_skb_internal net/core/dev.c:5685 [inline]
netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744
tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544
tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:584
ksys_write+0x127/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix wrong resources deallocation order
When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.
Deallocate resources in reverse order of allocating them to safely free
them. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit
Always purge mcu skb queues in mt7996_mcu_exit routine even if
mt7996_firmware_state fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: remove block_cb from driver_list before freeing
Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.
[0]:
[ 279.868433] ==================================================================
[ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963
[ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4
[ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 279.876295] Call Trace:
[ 279.876882] <TASK>
[ 279.877413] dump_stack_lvl+0x33/0x50
[ 279.878198] print_report+0xc2/0x610
[ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.879994] kasan_report+0xae/0xe0
[ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core]
[ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0
[ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0
[ 279.885037] ? tcf_block_setup+0x6b0/0x6b0
[ 279.885901] ? mutex_lock+0x7d/0xd0
[ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0
[ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress]
[ 279.888846] tcf_block_get_ext+0x61c/0x1200
[ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress]
[ 279.891701] qdisc_create+0x401/0xea0
[ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470
[ 279.893473] tc_modify_qdisc+0x6f7/0x16d0
[ 279.894344] ? tc_get_qdisc+0xac0/0xac0
[ 279.895213] ? mutex_lock+0x7d/0xd0
[ 279.896005] ? __mutex_lock_slowpath+0x10/0x10
[ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.898672] ? __sys_sendmsg+0xb5/0x140
[ 279.899494] ? do_syscall_64+0x3d/0x90
[ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.901337] ? kasan_save_stack+0x2e/0x40
[ 279.902177] ? kasan_save_stack+0x1e/0x40
[ 279.903058] ? kasan_set_track+0x21/0x30
[ 279.903913] ? kasan_save_free_info+0x2a/0x40
[ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0
[ 279.905741] ? kmem_cache_free+0x179/0x400
[ 279.906599] netlink_rcv_skb+0x12c/0x360
[ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.908360] ? netlink_ack+0x1550/0x1550
[ 279.909192] ? rhashtable_walk_peek+0x170/0x170
[ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390
[ 279.911086] ? _copy_from_iter+0x3d6/0xc70
[ 279.912031] netlink_unicast+0x553/0x790
[ 279.912864] ? netlink_attachskb+0x6a0/0x6a0
[ 279.913763] ? netlink_recvmsg+0x416/0xb50
[ 279.914627] netlink_sendmsg+0x7a1/0xcb0
[ 279.915473] ? netlink_unicast+0x790/0x790
[ 279.916334] ? iovec_from_user.part.0+0x4d/0x220
[ 279.917293] ? netlink_unicast+0x790/0x790
[ 279.918159] sock_sendmsg+0xc5/0x190
[ 279.918938] ____sys_sendmsg+0x535/0x6b0
[ 279.919813] ? import_iovec+0x7/0x10
[ 279.920601] ? kernel_sendmsg+0x30/0x30
[ 279.921423] ? __copy_msghdr+0x3c0/0x3c0
[ 279.922254] ? import_iovec+0x7/0x10
[ 279.923041] ___sys_sendmsg+0xeb/0x170
[ 279.923854] ? copy_msghdr_from_user+0x110/0x110
[ 279.924797] ? ___sys_recvmsg+0xd9/0x130
[ 279.925630] ? __perf_event_task_sched_in+0x183/0x470
[ 279.926656] ? ___sys_sendmsg+0x170/0x170
[ 279.927529] ? ctx_sched_in+0x530/0x530
[ 279.928369] ? update_curr+0x283/0x4f0
[ 279.929185] ? perf_event_update_userpage+0x570/0x570
[ 279.930201] ? __fget_light+0x57/0x520
[ 279.931023] ? __switch_to+0x53d/0xe70
[ 27
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mlx5: fix skb leak while fifo resync and push
During ptp resync operation SKBs were poped from the fifo but were never
freed neither by napi_consume nor by dev_kfree_skb_any. Add call to
napi_consume_skb to properly free SKBs.
Another leak was happening because mlx5e_skb_fifo_has_room() had an error
in the check. Comparing free running counters works well unless C promotes
the types to something wider than the counter. In this case counters are
u16 but the result of the substraction is promouted to int and it causes
wrong result (negative value) of the check when producer have already
overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setup
crypto_alloc_shash() allocates resources, which should be released by
crypto_free_shash(). When ath11k_peer_find() fails, there has memory
leak. Add missing crypto_free_shash() to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type
spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'
The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.
[ta: refine changes, new commit message, fix compilation error] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net
Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd
startup") moved the initialization of the reply cache into nfsd startup,
but didn't account for the stats counters, which can be accessed before
nfsd is ever started. The result can be a NULL pointer dereference when
someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still
shut down.
This is a regression and a user-triggerable oops in the right situation:
- non-x86_64 arch
- /proc/fs/nfsd is mounted in the namespace
- nfsd is not started in the namespace
- unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats"
Although this is easy to trigger on some arches (like aarch64), on
x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the
fixed_percpu_data. That struct looks just enough like a newly
initialized percpu var to allow nfsd_reply_cache_stats_show to access
it without Oopsing.
Move the initialization of the per-net+per-cpu reply-cache counters
back into nfsd_init_net, while leaving the rest of the reply cache
allocations to be done at nfsd startup time.
Kudos to Eirik who did most of the legwork to track this down. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Add a check for valid 'mad_agent' pointer
When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.
In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.
This issue can hit when RoCE driver unregisters ib_device
Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
? __schedule+0x20b/0x560
srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
srpt_remove_one+0x20/0x150 [ib_srpt]
remove_client_context+0x88/0xd0 [ib_core]
bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
disable_device+0x8a/0x160 [ib_core]
bond0: active interface up!
? kernfs_name_hash+0x12/0x80
(NULL device *): Bonding Info Received: rdev: 000000006c0b8247
__ib_unregister_device+0x42/0xb0 [ib_core]
(NULL device *): Master: mode: 4 num_slaves:2
ib_unregister_device+0x22/0x30 [ib_core]
(NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0
bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] |
| In the Linux kernel, the following vulnerability has been resolved:
net/net_failover: fix txq exceeding warning
The failover txq is inited as 16 queues.
when a packet is transmitted from the failover device firstly,
the failover device will select the queue which is returned from
the primary device if the primary device is UP and running.
If the primary device txq is bigger than the default 16,
it can lead to the following warning:
eth0 selects TX queue 18, but real number of TX queues is 16
The warning backtrace is:
[ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1
[ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014
[ 32.147730] Call Trace:
[ 32.147971] <TASK>
[ 32.148183] dump_stack_lvl+0x48/0x70
[ 32.148514] dump_stack+0x10/0x20
[ 32.148820] netdev_core_pick_tx+0xb1/0xe0
[ 32.149180] __dev_queue_xmit+0x529/0xcf0
[ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0
[ 32.149967] ip_finish_output2+0x278/0x560
[ 32.150327] __ip_finish_output+0x1fe/0x2f0
[ 32.150690] ip_finish_output+0x2a/0xd0
[ 32.151032] ip_output+0x7a/0x110
[ 32.151337] ? __pfx_ip_finish_output+0x10/0x10
[ 32.151733] ip_local_out+0x5e/0x70
[ 32.152054] ip_send_skb+0x19/0x50
[ 32.152366] udp_send_skb.isra.0+0x163/0x3a0
[ 32.152736] udp_sendmsg+0xba8/0xec0
[ 32.153060] ? __folio_memcg_unlock+0x25/0x60
[ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10
[ 32.153854] ? sock_has_perm+0x85/0xa0
[ 32.154190] inet_sendmsg+0x6d/0x80
[ 32.154508] ? inet_sendmsg+0x6d/0x80
[ 32.154838] sock_sendmsg+0x62/0x70
[ 32.155152] ____sys_sendmsg+0x134/0x290
[ 32.155499] ___sys_sendmsg+0x81/0xc0
[ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0
[ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0
[ 32.156649] ? get_random_u16+0x69/0xf0
[ 32.156989] ? __fget_light+0xcf/0x110
[ 32.157326] __sys_sendmmsg+0xc4/0x210
[ 32.157657] ? __sys_connect+0xb7/0xe0
[ 32.157995] ? __audit_syscall_entry+0xce/0x140
[ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0
[ 32.158820] __x64_sys_sendmmsg+0x24/0x30
[ 32.159171] do_syscall_64+0x38/0x90
[ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix that by reducing txq number as the non-existent primary-dev does. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix table blob use-after-free
We are not allowed to return an error at this point.
Looking at the code it looks like ret is always 0 at this
point, but its not.
t = find_table_lock(net, repl->name, &ret, &ebt_mutex);
... this can return a valid table, with ret != 0.
This bug causes update of table->private with the new
blob, but then frees the blob right away in the caller.
Syzbot report:
BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74
Workqueue: netns cleanup_net
Call Trace:
kasan_report+0xbf/0x1f0 mm/kasan/report.c:517
__ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168
ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372
ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169
cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613
...
ip(6)tables appears to be ok (ret should be 0 at this point) but make
this more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix data races around sk->sk_shutdown.
KCSAN found a data race around sk->sk_shutdown where unix_release_sock()
and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll()
and unix_dgram_poll() read it locklessly.
We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE().
BUG: KCSAN: data-race in unix_poll / unix_release_sock
write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0:
unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
unix_release+0x59/0x80 net/unix/af_unix.c:1042
__sock_release+0x7d/0x170 net/socket.c:653
sock_close+0x19/0x30 net/socket.c:1397
__fput+0x179/0x5e0 fs/file_table.c:321
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x116/0x1a0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1:
unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170
sock_poll+0xcf/0x2b0 net/socket.c:1385
vfs_poll include/linux/poll.h:88 [inline]
ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855
ep_send_events fs/eventpoll.c:1694 [inline]
ep_poll fs/eventpoll.c:1823 [inline]
do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258
__do_sys_epoll_wait fs/eventpoll.c:2270 [inline]
__se_sys_epoll_wait fs/eventpoll.c:2265 [inline]
__x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0x00 -> 0x03
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Check for uptr overflow
syzkaller found that setting up a map with a user VA that wraps past zero
can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0
due to invalid arguments.
Prevent creating a pages with a uptr and size that would math overflow.
WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390
Modules linked in:
CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:pfn_reader_user_pin+0x2e6/0x390
Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00
RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72
RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002
RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e
R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60
R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000
FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
pfn_reader_next+0x14a/0x7b0
? interval_tree_double_span_iter_update+0x11a/0x140
pfn_reader_first+0x140/0x1b0
iopt_pages_rw_slow+0x71/0x280
? __this_cpu_preempt_check+0x20/0x30
iopt_pages_rw_access+0x2b2/0x5b0
iommufd_access_rw+0x19f/0x2f0
iommufd_test+0xd11/0x16f0
? write_comp_data+0x2f/0x90
iommufd_fops_ioctl+0x206/0x330
__x64_sys_ioctl+0x10e/0x160
? __pfx_iommufd_fops_ioctl+0x10/0x10
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc |
