| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Validate the persistent meta data subbuf array
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix incorrect autogroup migration detection
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340
...
Call Trace:
<TASK>
cgroup_migrate_execute+0x5b1/0x700
cgroup_attach_task+0x296/0x400
__cgroup_procs_write+0x128/0x140
cgroup_procs_write+0x17/0x30
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x31d/0x4a0
__x64_sys_write+0x72/0xf0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task(). |
| In the Linux kernel, the following vulnerability has been resolved:
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly
pruning the dcache.
Also, fix missing permissions checks. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: vimc: skip .s_stream() for stopped entities
Syzbot reported [1] a warning prompted by a check in call_s_stream()
that checks whether .s_stream() operation is warranted for unstarted
or stopped subdevs.
Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that
entities skip a call to .s_stream() unless they have been previously
properly started.
[1] Syzbot report:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460
Modules linked in:
CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0
...
Call Trace:
<TASK>
vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62
vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline]
vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203
vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256
vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789
vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348
vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline]
vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118
__video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122
video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463
v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2b85c01b19
... |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 |
| Improper authorization in Smart Switch installed on non-Samsung Device prior to version 3.7.64.10 allows local attackers to read data with the privilege of Smart Switch. User interaction is required for triggering this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: multi-gen LRU: fix crash during cgroup migration
lru_gen_migrate_mm() assumes lru_gen_add_mm() runs prior to itself. This
isn't true for the following scenario:
CPU 1 CPU 2
clone()
cgroup_can_fork()
cgroup_procs_write()
cgroup_post_fork()
task_lock()
lru_gen_migrate_mm()
task_unlock()
task_lock()
lru_gen_add_mm()
task_unlock()
And when the above happens, kernel crashes because of linked list
corruption (mm_struct->lru_gen.list). |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: split tx timer into transmission and timeout
The timer for the transmission of isotp PDUs formerly had two functions:
1. send two consecutive frames with a given time gap
2. monitor the timeouts for flow control frames and the echo frames
This led to larger txstate checks and potentially to a problem discovered
by syzbot which enabled the panic_on_warn feature while testing.
The former 'txtimer' function is split into 'txfrtimer' and 'txtimer'
to handle the two above functionalities with separate timer callbacks.
The two simplified timers now run in one-shot mode and make the state
transitions (especially with isotp_rcv_echo) better understandable. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask()
It was found that the check to see if a partition could use up all
the cpus from the parent cpuset in update_parent_subparts_cpumask()
was incorrect. As a result, it is possible to leave parent with no
effective cpu left even if there are tasks in the parent cpuset. This
can lead to system panic as reported in [1].
Fix this probem by updating the check to fail the enabling the partition
if parent's effective_cpus is a subset of the child's cpus_allowed.
Also record the error code when an error happens in update_prstate()
and add a test case where parent partition and child have the same cpu
list and parent has task. Enabling partition in the child will fail in
this case.
[1] https://www.spinics.net/lists/cgroups/msg36254.html |
| In the Linux kernel, the following vulnerability has been resolved:
fscache: Use wait_on_bit() to wait for the freeing of relinquished volume
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
FS-Cache: Potential volume collision new=00000024 old=00000022
......
INFO: task mount:1148 blocked for more than 122 seconds.
Not tainted 6.1.0-rc6+ #1
task:mount state:D stack:0 pid:1148 ppid:1
Call Trace:
<TASK>
__schedule+0x2f6/0xb80
schedule+0x67/0xe0
fscache_wait_on_volume_collision.cold+0x80/0x82
__fscache_acquire_volume+0x40d/0x4e0
erofs_fscache_register_volume+0x51/0xe0 [erofs]
erofs_fscache_register_fs+0x19c/0x240 [erofs]
erofs_fc_fill_super+0x746/0xaf0 [erofs]
vfs_get_super+0x7d/0x100
get_tree_nodev+0x16/0x20
erofs_fc_get_tree+0x20/0x30 [erofs]
vfs_get_tree+0x24/0xb0
path_mount+0x2fa/0xa90
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
There are several problems with the way hyp code lazily saves the host's
FPSIMD/SVE state, including:
* Host SVE being discarded unexpectedly due to inconsistent
configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to
result in QEMU crashes where SVE is used by memmove(), as reported by
Eric Auger:
https://issues.redhat.com/browse/RHEL-68997
* Host SVE state is discarded *after* modification by ptrace, which was an
unintentional ptrace ABI change introduced with lazy discarding of SVE state.
* The host FPMR value can be discarded when running a non-protected VM,
where FPMR support is not exposed to a VM, and that VM uses
FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR
before unbinding the host's FPSIMD/SVE/SME state, leaving a stale
value in memory.
Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME
state when loading a vCPU such that KVM does not need to save any of the
host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is
removed and the necessary call to fpsimd_save_and_flush_cpu_state() is
placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr'
should not be used, they are set to NULL; all uses of these will be
removed in subsequent patches.
Historical problems go back at least as far as v5.17, e.g. erroneous
assumptions about TIF_SVE being clear in commit:
8383741ab2e773a9 ("KVM: arm64: Get rid of host SVE tracking/saving")
... and so this eager save+flush probably needs to be backported to ALL
stable trees. |
| MeterSphere is an open source continuous testing platform. Prior to version 2.10.25-lts, a logic flaw allows retrieval of arbitrary user information. This allows an unauthenticated attacker to log in to the system as any user. This issue has been patched in version 2.10.25-lts. |
| Microsoft Publisher Security Feature Bypass Vulnerability |
| Improper authorization in Samsung Health prior to version 6.30.5.105 allows local attackers to access data in Samsung Health. |
| Improper authentication in Smart Switch prior to version 3.7.66.6 allows adjacent attackers to access transferring data. |
| An authentication bypass security issue exists within FactoryTalk View Machine Edition Web Browser ActiveX control. Exploitation of this vulnerability allows unauthorized access to the PanelView Plus 7 Series B, including access to the file system, retrieval of diagnostic information, event logs, and more. |
