| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Publish the output fence outside of job_lock
job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe
lock under it creates an inversion. drm_syncobj_replace_fence() takes
drm_syncobj::lock, which other paths acquire with interrupts enabled. For
example, a thread interrupted while holding it blocks the handler on
job_lock, and the handler can only make progress once the submit path
releases job_lock, which it cannot do while waiting for drm_syncobj::lock.
This is reported by lockdep:
[ 188.139076] ========================================================
[ 188.139086] WARNING: possible irq lock inversion dependency detected
[ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C
[ 188.139108] --------------------------------------------------------
[ 188.139116] swapper/0/0 just changed the state of lock:
[ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4]
[ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past:
[ 188.139242] (&syncobj->lock){+.+.}-{3:3}
[ 188.139256] and interrupts could create inverse lock ordering between them.
[ 188.139267] other info that might help us debug this:
[ 188.139275] Possible interrupt unsafe locking scenario:
[ 188.139284] CPU0 CPU1
[ 188.139291] ---- ----
[ 188.139299] lock(&syncobj->lock);
[ 188.139312] local_irq_disable();
[ 188.139320] lock(&vc4->job_lock);
[ 188.139335] lock(&syncobj->lock);
[ 188.139350] <Interrupt>
[ 188.139358] lock(&vc4->job_lock);
[ 188.139372] *** DEADLOCK ***
Hand the fence over after job_lock is dropped. The job can complete and
drop exec->fence in that window, so take a reference first and publish
through the local pointer, as exec may already be gone. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reload TDLS header pointer after skb_linearize()
ieee80211_process_tdls_channel_switch() sets tf = skb->data before it
calls skb_linearize(), and reads tf->action_code afterwards.
ieee80211_rx_h_data() queues TDLS channel switch requests and
responses to the interface after pulling only
offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be
non-linear when the interface work handles it. Drivers that build
paged RX skbs do this for every frame that does not fit into the skb
head, e.g. iwlwifi (mvm), which is also the only mac80211 driver
that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data
does not fit into the tailroom, skb_linearize() moves the data to a
new head and frees the old one, and the action code is then read from
freed memory. Depending on what that memory holds by then, the frame
is handled as before or ends in the WARN_ON_ONCE() of the default
case.
The frame only has to be a data frame with the TDLS ethertype from an
authorized peer, e.g. relayed by the AP from another station in the
BSS; the read happens before the sender is checked to be a TDLS peer.
Load tf after skb_linearize(), as the request and response handlers
already do.
Found by static analysis tool CodeQL. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: reorder operations within espintcp_init_sk
When enabled on a socket, espintcp sets the socket callbacks to its
own before it has finished setting up its context and published it as
icsk_ulp_data. Any one of those callbacks that gets called before will
dereference a NULL icsk_ulp_data.
Fix this by reording the operations, and add memory barriers to ensure
callers will have a struct espintcp_ctx available. Add a few
WRITE_ONCE/READ_ONCE too while we're there. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: remove bogus context initialization in alloc_requests
alloc_requests() initializes usb9pfs->in_req->context to point at the
struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites
this with the real struct p9_req_t pointer before every transmit, and
usb9pfs_tx_complete() clears it back to NULL after each completion, so
in_req->context only ever holds a valid p9_req_t once a request has
actually been queued.
usb9pfs_clear_tx(), however, can run at any time (mount close, gadget
disable) independent of whether a request was ever queued. If it runs
before the first usb9pfs_transmit(), it reads the leftover sentinel
value, type-confuses the struct f_usb9pfs pointer as a struct
p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and
hands it to p9_client_cb(), which manipulates req->wq and req->refcount
at bogus offsets inside f_usb9pfs. This reliably corrupts memory or
panics whenever the transport is torn down before any 9p request has
been transmitted, e.g. mounting and immediately unmounting, or a cable
disconnect racing the very first request.
usb9pfs->out_req->context is set the same way but is never read by
this transport (usb9pfs_rx_complete() identifies the instance via
ep->driver_data instead), so it serves no purpose either.
Both endpoints' ->driver_data are already set to usb9pfs in
enable_endpoint(), which is what the completion handlers actually use
to recover the f_usb9pfs instance. Just drop the leftover
->context assignments; usb_ep_alloc_request()/alloc_ep_req() already
return zeroed requests, so in_req->context correctly starts out NULL. |
| Incorrect authorization in iOSWeb in Google Chrome on on iOS prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| In JetBrains TeamCity before 2026.2 reflected XSS in Kubernetes cloud profile namespace and deployment choosers was possible |
| A flaw was found in GIMP. Opening a crafted XCF with a truncated uncompressed tile can expose uninitialized main-process stack memory through the imported layer's pixel data, which may include process addresses that weaken ASLR. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Bus Lock VM exit
Enable Bus Lock VM exit functionality for TDX guests.
Bus Lock VM exit is an existing feature supported by KVM. Userspace can
enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's
reported as supported. However, KVM reports the support of this CAP
just based on the hardware capability but doesn't differentiate between
VMX and TDX. This leads to the issue that userspace can enable this cap
for TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Bus Lock VM exit for TDX guests by programming the
BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler.
Note, there is no enumeration bit for this feature by TDX module because
all TDX modules support it and allow to set the TD VMCS as long as the
hardware supports the feature. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Notify VM exit
Enable Notify VM exit functionality for TDX guests.
Notify VM exit is an existing feature supported by KVM. Userspace can
enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's
reported as supported. However, KVM reports the support of this CAP just
based on the hardware capability but doesn't differentiate between VMX
and TDX. This leads to the issue that userspace can enable this cap for
TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Notify VM exit for TDX guests by:
- Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify
Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS
bits are set. Since TDX vCPU cannot be reset, it only needs to be
configured once when initializing the TDX vCPU.
- Adding corresponding exit handler for TDX Notify VM Exit.
Notify VM exit can happen when executing the IRET instruction. If the
IRET unblocks the NMI blocking state, bit 12 of the exit qualification
is set. In this case, the VMM needs to restore the "blocked by NMI" state
when it decides to re-enter the guest. For TDX, KVM cannot manage the
GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to
handle it. Extract the common part without NMI blocking handling into a
helper in common.h so that it can be shared between VMX and TDX.
Note, KVM uses "pre-production" terminology for the feature formally called
Notify VM-Exit. All public versions of the SDM refer to the feature as
Instruction Timeout. This will be remedied in the near future, for now,
use KVM's terminology for consistency.
Note, #2, there is no enumeration bit for Notify VM exit by TDX module
because all TDX modules support it, and allow to set the corresponding
TD VMCS fields as long as the hardware supports the feature. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak
Ensure all reserved flags are zeroed when setting the msg_pending flag as
part of SynIC message delivery, as setting only msg_pending can leak seven
bits of kernel stack data to the guest. E.g. gcc typically uses a
bitwise-OR to set the msg_pending flag, without initializing the on-stack
variable.
Precisely zero the flags, e.g. as opposed to zeroing the entire structure,
to make it somewhat more obvious that the flags *need* to be zeroed. E.g.
it would be quite easy to misread the initial read of guest memory and
think that zeroing the entire structure is completely superfluous. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Request event processing for exception VM-Exits
Request event processing whenever kvm_queue_exception_vmexit() queues an
exception VM-Exit. Most callers reach the helper through
kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested
asynchronous page faults call it directly.
Without another event request, vcpu_enter_guest() skips
kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can
clear the pending exception while reconstructing vectoring state, losing
the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a
later regular #PF can consume the stale value.
Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the
queued VM-Exit before KVM re-enters L2. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration
Xen's map_guest_area() enforces that vcpu_info is aligned to
sizeof(xen_ulong_t). KVM has no such check, allowing a guest to
register vcpu_info at an arbitrary byte alignment.
Enforce unconditional 4-byte alignment regardless of the current
shinfo mode. This is sufficient because subsequent commits ensure
that all locked atomic operations on vcpu_info fields use at most
32-bit accesses. Return -ENXIO on failure, matching Xen's
map_guest_area() behaviour for unaligned requests.
Originally observed in review of an unrelated patch:
https://lore.kernel.org/all/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state
Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e.
mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN
unfortunately allows the nonsensical combination, i.e. doesn't fail, but
KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME
is set. Breaking that invariant can lead to a variety of issue,
particularly in MMU code that keys off EFER.LMA when determining whether to
emulate/virtualization 4/5-level paging versus PAE paging. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: x86: hdmi: fix chmap array missing terminator entry
had_build_channel_allocation_map() allocates a single struct
snd_pcm_chmap_elem via kzalloc() and stores it as
intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to
be a zero-terminated array (see snd_pcm_std_chmaps[]), but
had_register_chmap_ctls() never overrides the TLV callback installed
by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from
ALSA core is left in place.
pcm_chmap_ctl_tlv() is reachable by any local user via
SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and
walks the array with "for (map = info->chmap; map->channels; map++)".
Since the driver's single element is never terminated, this walks
past the allocation. The same pointer is also freed on hot-unplug and
rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback
runs under card->controls_rwsem without that mutex, so the walk can
also race a concurrent free of the array.
Fix this by allocating a second, zeroed element so the array is
properly terminated, and by dropping the inherited TLV callback
entirely at registration time, since the driver never implements one
of its own. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix afs to abort the rxrpc call on send error
Fix afs_send_empty_reply() and afs_send_simple_reply() to always try to
abort the rxrpc call rather than just aborting on -ENOMEM and otherwise
abandoning it. If the call is already complete due to network failure or a
received abort, this will do nothing.
Also make afs_make_call() always abort on send error; again, it does
nothing if the rxrpc call is already dead. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix lack of short-send handling in rxrpc_kernel_send_data()
Fix rxrpc_kernel_send_data() to loop around if it detects a short send.
David Laight suggested doing it here rather than wrapping all the calls in
loops. Further, remove the len argument and use the iterator count instead
and return 0 on success, not the amount copied.
Note this is also a prerequisite for changing the way rxrpc_send_data()
works to return a short send rather than an error if some data was
buffered. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix update of call->tx_pending without holding lock
Currently, rxrpc_send_data() updates call->tx_pending just before it
returns - but it won't be holding the call->user_mutex when it does this if
a wait was interrupted by a signal. This would allow a parallel sendmsg()
to race.
Further, both the callers of rxrpc_send_data() call it with the lock held,
and then it returns an indication through the parameter list to say whether
it has dropped the lock or not - after which the callers both just drop the
lock if it's still held.
Fix this by:
(1) Moving the release of call->user_mutex down into rxrpc_send_data() and
get rid of the indicator parameter. This makes it easier to see where
the lock is held.
(2) After waiting, if the attempt to reacquire the mutex is interrupted,
just return directly there rather than going to out_unlock
(3) Restricting the txb variable to inside the buffering loop and leaving
->tx_pending set until we've queued the buffer.
Note that there's a slight change in behaviour in that wait_for_space
failure now doesn't check for completion because it doesn't hold the call
user_mutex. The caller, however, should re-issue the send and pick up any
error at a second attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: treat empty auth.unix.gid replies as negative entries
When rpc.mountd cannot resolve a uid (getpwuid() or getgrouplist()
failure, e.g. while winbind or sssd is briefly unreachable), it
answers the auth.unix.gid upcall with zero groups. unix_gid_parse()
installs that as a valid positive entry, and svcauth_unix_set_client()
then replaces the credential's group list with the empty one on
every request, RPCSEC_GSS included via svcauth_gss_set_client().
One failed lookup strips that uid of all supplementary groups on
every export for up to mountd's configured TTL (30 minutes by
default), long after the NSS backend has recovered.
mountd cannot send an empty list for a successful lookup, since
getgrouplist(3) always includes at least the user's primary group,
so a zero-group reply can only mean the lookup failed. Record it as
a negative entry: unix_gid_find() then returns -ENOENT and
svcauth_unix_set_client() keeps the groups the RPC credential
already carries. This is the fallback that
commit 3fc605a2aa38 ("[PATCH] knfsd: allow the server to provide a
gid list when using AUTH_UNIX authentication") promised when no
answer is available, and the same state try_to_negate_entry()
already creates when no listener holds the channel open. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: trace an accepted transport before publishing it
svc_handle_xprt() publishes a newly accepted transport before tracing
it. svc_add_new_temp_xprt() places the transport on sv_tempsocks and
clears XPT_BUSY, so another nfsd thread can dequeue it at once. If the
peer has already closed the connection, that thread runs
svc_delete_xprt(), which drops the list reference, the only reference
the new transport holds. trace_svc_xprt_accept() then reads the
transport's addresses and network namespace from freed memory.
Before publication the accepting thread owns the transport
exclusively: XPT_BUSY is still set from svc_xprt_init() and the
transport is on no list. Emit the tracepoint there.
[ cel: trace before publication instead of taking an extra reference ] |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Reject a socket that already has an svc_sock attached
Writing the same socket descriptor to /proc/fs/nfsd/portlist twice
attaches a second svc_sock to one socket. svc_setup_socket() saves
the socket's callbacks before installing its own, so the second
attach records svc_write_space() as the old write_space callback.
svc_udp_init() invokes that callback by way of svc_sock_setbufsize(),
and svc_write_space() then calls itself until the kernel stack is
exhausted:
BUG: TASK stack guard page was hit at ffffc900037d7ff8
svc_write_space+0x90/0x2b0 net/sunrpc/svcsock.c:429
svc_write_space+0xe6/0x2b0 net/sunrpc/svcsock.c:430
... 700 more ...
svc_sock_setbufsize+0x18d/0x220 net/sunrpc/svcsock.c:386
svc_udp_init net/sunrpc/svcsock.c:854 [inline]
svc_setup_socket+0xb2f/0x1090 net/sunrpc/svcsock.c:1498
svc_addsock+0x2fd/0x760 net/sunrpc/svcsock.c:1547
__write_ports_addfd fs/nfsd/nfsctl.c:742 [inline]
write_ports+0xa5b/0xcc0 fs/nfsd/nfsctl.c:861
nfsctl_transaction_write+0x106/0x1a0 fs/nfsd/nfsctl.c:112
svc_data_ready() and svc_tcp_state_change() chain through their saved
callbacks the same way, so a TCP descriptor added twice recurses on
the next incoming segment instead. Reaching any of this takes a
writer on portlist, and the nfsd filesystem sets no FS_USERNS_MOUNT,
so the reproducer needs CAP_SYS_ADMIN in the initial user namespace.
Reject a socket that already carries sk_user_data. svc_setup_socket()
overwrites that field unconditionally, so a socket some other
consumer has claimed is one NFSD would corrupt whether or not the
callbacks recurse. |