| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
The reproduction steps:
1. create a tun interface
2. enable l2 bearer
3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun
tipc: Started in network mode
tipc: Node identity 8af312d38a21, cluster identity 4711
tipc: Enabled bearer <eth:syz_tun>, priority 1
Oops: general protection fault
KASAN: null-ptr-deref in range
CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT
Hardware name: QEMU Ubuntu 24.04 PC
RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0
the ub was in fact a struct dev.
when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or
other media when other thread changes it.
fix this by checking media_id. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: Relax constraint in draining guard
The active reference lifecycle provides the break/unbreak mechanism but
the active reference is not truly active after unbreak -- callers don't
use it afterwards but it's important for proper pairing of kn->active
counting. Assuming this mechanism is in place, the WARN check in
kernfs_should_drain_open_files() is too sensitive -- it may transiently
catch those (rightful) callers between
kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen
Ridong:
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain ...
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
To avoid the false positives (mind panic_on_warn) remove the check altogether.
(This is meant as quick fix, I think active reference break/unbreak may be
simplified with larger rework.) |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
syzkaller reported a null-ptr-deref in sock_omalloc() while allocating
a CALIPSO option. [0]
The NULL is of struct sock, which was fetched by sk_to_full_sk() in
calipso_req_setattr().
Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"),
reqsk->rsk_listener could be NULL when SYN Cookie is returned to its
client, as hinted by the leading SYN Cookie log.
Here are 3 options to fix the bug:
1) Return 0 in calipso_req_setattr()
2) Return an error in calipso_req_setattr()
3) Alaways set rsk_listener
1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie
for CALIPSO. 3) is also no go as there have been many efforts to reduce
atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35
("tcp/dccp: do not touch listener sk_refcnt under synflood").
As of the blamed commit, SYN Cookie already did not need refcounting,
and no one has stumbled on the bug for 9 years, so no CALIPSO user will
care about SYN Cookie.
Let's return an error in calipso_req_setattr() and calipso_req_delattr()
in the SYN Cookie case.
This can be reproduced by [1] on Fedora and now connect() of nc times out.
[0]:
TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline]
RIP: 0010:sock_net include/net/sock.h:655 [inline]
RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806
Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
RSP: 0018:ffff88811af89038 EFLAGS: 00010216
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400
RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030
RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e
R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000
R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050
FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0
PKRU: 80000000
Call Trace:
<IRQ>
ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288
calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204
calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597
netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249
selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342
selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551
security_inet_conn_request+0x50/0xa0 security/security.c:4945
tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825
tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275
tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328
tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781
tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667
tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904
ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436
ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:469 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not double dequeue a configuration request
Some of our devices crash in tb_cfg_request_dequeue():
general protection fault, probably for non-canonical address 0xdead000000000122
CPU: 6 PID: 91007 Comm: kworker/6:2 Tainted: G U W 6.6.65
RIP: 0010:tb_cfg_request_dequeue+0x2d/0xa0
Call Trace:
<TASK>
? tb_cfg_request_dequeue+0x2d/0xa0
tb_cfg_request_work+0x33/0x80
worker_thread+0x386/0x8f0
kthread+0xed/0x110
ret_from_fork+0x38/0x50
ret_from_fork_asm+0x1b/0x30
The circumstances are unclear, however, the theory is that
tb_cfg_request_work() can be scheduled twice for a request:
first time via frame.callback from ring_work() and second
time from tb_cfg_request(). Both times kworkers will execute
tb_cfg_request_dequeue(), which results in double list_del()
from the ctl->request_queue (the list poison deference hints
at it: 0xdead000000000122).
Do not dequeue requests that don't have TB_CFG_REQUEST_ACTIVE
bit set. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARN() in get_bpf_raw_tp_regs
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91: Fix possible out-of-boundary access
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath11k_core_halt() only
reinitializes the "arvifs" list head. This will cause the
list node immediately following the list head to become an
invalid list node. Because the prev of that node still points
to the list head "arvifs", but the next of the list head "arvifs"
no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif
removal, and it happens before the spin_lock_bh(&ar->data_lock)
in ath11k_mac_op_remove_interface(), list_del() will detect the
previously mentioned situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the
list head "arvifs" during WLAN halt. The reinitialization is to make
the list nodes valid, ensuring that the list_del() in
ath11k_mac_op_remove_interface() can execute normally.
Call trace:
__list_del_entry_valid_or_report+0xb8/0xd0
ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k]
drv_remove_interface+0x48/0x194 [mac80211]
ieee80211_do_stop+0x6e0/0x844 [mac80211]
ieee80211_stop+0x44/0x17c [mac80211]
__dev_close_many+0xac/0x150
__dev_change_flags+0x194/0x234
dev_change_flags+0x24/0x6c
devinet_ioctl+0x3a0/0x670
inet_ioctl+0x200/0x248
sock_do_ioctl+0x60/0x118
sock_ioctl+0x274/0x35c
__arm64_sys_ioctl+0xac/0xf0
invoke_syscall+0x48/0x114
...
Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: atm: fix /proc/net/atm/lec handling
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: avoid infinite loop due to incomplete zstd-compressed data
Currently, the decompression logic incorrectly spins if compressed
data is truncated in crafted (deliberately corrupted) images. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix the deadlock of enetc_mdio_lock
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: stacktrace: Disable KASAN checks for non-current tasks
Unwinding the stack of a task other than current, KASAN would report
"BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460"
There is a same issue on x86 and has been resolved by the commit
84936118bdf3 ("x86/unwind: Disable KASAN checks for non-current tasks")
The solution could be applied to RISC-V too.
This patch also can solve the issue:
https://seclists.org/oss-sec/2025/q4/23
[[email protected]: clean up checkpatch issues] |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix general protection fault in __smc_diag_dump
The syzbot report a crash:
Oops: general protection fault, probably for non-canonical address 0xfbd5a5d5a0000003: 0000 [#1] SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead4ead00000018-0xdead4ead0000001f]
CPU: 1 UID: 0 PID: 6949 Comm: syz.0.335 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:smc_diag_msg_common_fill net/smc/smc_diag.c:44 [inline]
RIP: 0010:__smc_diag_dump.constprop.0+0x3ca/0x2550 net/smc/smc_diag.c:89
Call Trace:
<TASK>
smc_diag_dump_proto+0x26d/0x420 net/smc/smc_diag.c:217
smc_diag_dump+0x27/0x90 net/smc/smc_diag.c:234
netlink_dump+0x539/0xd30 net/netlink/af_netlink.c:2327
__netlink_dump_start+0x6d6/0x990 net/netlink/af_netlink.c:2442
netlink_dump_start include/linux/netlink.h:341 [inline]
smc_diag_handler_dump+0x1f9/0x240 net/smc/smc_diag.c:251
__sock_diag_cmd net/core/sock_diag.c:249 [inline]
sock_diag_rcv_msg+0x438/0x790 net/core/sock_diag.c:285
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x5a7/0x870 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg net/socket.c:729 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2614
___sys_sendmsg+0x134/0x1d0 net/socket.c:2668
__sys_sendmsg+0x16d/0x220 net/socket.c:2700
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4e0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The process like this:
(CPU1) | (CPU2)
---------------------------------|-------------------------------
inet_create() |
// init clcsock to NULL |
sk = sk_alloc() |
|
// unexpectedly change clcsock |
inet_init_csk_locks() |
|
// add sk to hash table |
smc_inet_init_sock() |
smc_sk_init() |
smc_hash_sk() |
| // traverse the hash table
| smc_diag_dump_proto
| __smc_diag_dump()
| // visit wrong clcsock
| smc_diag_msg_common_fill()
// alloc clcsock |
smc_create_clcsk |
sock_create_kern |
With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changed
in inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc,
just remove it.
After removing the INET_PROTOSW_ICSK flag, this patch alse revert
commit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC")
to avoid casting smc_sock to inet_connection_sock. |
