| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation vulnerability in sha.js allows Input Data Manipulation.This issue affects sha.js: through 2.4.11. |
| Improper Input Validation vulnerability in cipher-base allows Input Data Manipulation.This issue affects cipher-base: through 1.0.4. |
| Memory safety bugs present in Firefox ESR 115.26, Firefox ESR 128.13, Thunderbird ESR 128.13, Firefox ESR 140.1, Thunderbird ESR 140.1, Firefox 141 and Thunderbird 141. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 142, Firefox ESR < 115.27, Firefox ESR < 128.14, Firefox ESR < 140.2, Thunderbird < 142, Thunderbird < 128.14, and Thunderbird < 140.2. |
| The issue was addressed with improved checks. This issue is fixed in Xcode 26. Processing an overly large path value may crash a process. |
| linux-pam (aka Linux PAM) before 1.6.0 allows attackers to cause a denial of service (blocked login process) via mkfifo because the openat call (for protect_dir) lacks O_DIRECTORY. |
| A privilege escalation flaw was found in Ceph. Ceph-crash.service allows a local attacker to escalate privileges to root in the form of a crash dump, and dump privileged information. |
| The boot loader in Das U-Boot before 2021.04-rc2 mishandles use of unit addresses in a FIT. |
| The boot loader in Das U-Boot before 2021.04-rc2 mishandles a modified FIT. |
| ScienceLogic SL1 (formerly EM7) is affected by an unspecified vulnerability involving an unspecified third-party component packaged with SL1. The vulnerability is addressed in SL1 versions 12.1.3+, 12.2.3+, and 12.3+. Remediations have been made available for all SL1 versions back to version lines 10.1.x, 10.2.x, 11.1.x, 11.2.x, and 11.3.x. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: unregister xdp rxq info in the reset path
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Mask the bd_cnt field in the TX BD properly
The bd_cnt field in the TX BD specifies the total number of BDs for
the TX packet. The bd_cnt field has 5 bits and the maximum number
supported is 32 with the value 0.
CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB
fragments can approach or exceed the maximum supported by the chip.
Add a macro to properly mask the bd_cnt field so that the value 32
will be properly masked and set to 0 in the bd_cnd field.
Without this patch, the out-of-range bd_cnt value will corrupt the
TX BD and may cause TX timeout.
The next patch will check for values exceeding 32. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid journaling sb update on error if journal is destroying
Presently we always BUG_ON if trying to start a transaction on a journal marked
with JBD2_UNMOUNT, since this should never happen. However, while ltp running
stress tests, it was observed that in case of some error handling paths, it is
possible for update_super_work to start a transaction after the journal is
destroyed eg:
(umount)
ext4_kill_sb
kill_block_super
generic_shutdown_super
sync_filesystem /* commits all txns */
evict_inodes
/* might start a new txn */
ext4_put_super
flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
jbd2_journal_destroy
journal_kill_thread
journal->j_flags |= JBD2_UNMOUNT;
jbd2_journal_commit_transaction
jbd2_journal_get_descriptor_buffer
jbd2_journal_bmap
ext4_journal_bmap
ext4_map_blocks
...
ext4_inode_error
ext4_handle_error
schedule_work(&sbi->s_sb_upd_work)
/* work queue kicks in */
update_super_work
jbd2_journal_start
start_this_handle
BUG_ON(journal->j_flags &
JBD2_UNMOUNT)
Hence, introduce a new mount flag to indicate journal is destroying and only do
a journaled (and deferred) update of sb if this flag is not set. Otherwise, just
fallback to an un-journaled commit.
Further, in the journal destroy path, we have the following sequence:
1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates
This sequence is important as it ensures that, after this point, there is no sb
update that might be journaled so it is safe to update the sb outside the
journal. (To avoid race discussed in 2d01ddc86606)
Also, we don't need a similar check in ext4_grp_locked_error since it is only
called from mballoc and AFAICT it would be always valid to schedule work here. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't clobber ret in btrfs_validate_super()
Commit 2a9bb78cfd36 ("btrfs: validate system chunk array at
btrfs_validate_super()") introduces a call to validate_sys_chunk_array()
in btrfs_validate_super(), which clobbers the value of ret set earlier.
This has the effect of negating the validity checks done earlier, making
it so btrfs could potentially try to mount invalid filesystems. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: check error for register_netdev() on init
Current init logic ignores the error code from register_netdev(),
which will cause WARN_ON() on attempt to unregister it, if there was one,
and there is no info for the user that the creation of the netdev failed.
WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10
...
[ 3707.563641] unregister_netdev+0x1c/0x30
[ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf]
[ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf]
[ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf]
[ 3707.563739] idpf_remove+0xbf/0x780 [idpf]
[ 3707.563769] pci_device_remove+0xab/0x1e0
[ 3707.563786] device_release_driver_internal+0x371/0x530
[ 3707.563803] driver_detach+0xbf/0x180
[ 3707.563816] bus_remove_driver+0x11b/0x2a0
[ 3707.563829] pci_unregister_driver+0x2a/0x250
Introduce an error check and log the vport number and error code.
On removal make sure to check VPORT_REG_NETDEV flag prior to calling
unregister and free on the netdev.
Add local variables for idx, vport_config and netdev for readability. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()
Fix using the untrusted value of proto->raw.pkt_len in function
ice_vc_fdir_parse_raw() by verifying if it does not exceed the
VIRTCHNL_MAX_SIZE_RAW_PACKET value. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
Otherwise, if ext4_inode_attach_jinode() fails, a hung task will
happen because filemap_invalidate_unlock() isn't called to unlock
mapping->invalidate_lock. Like this:
EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory
INFO: task fsstress:374 blocked for more than 122 seconds.
Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373
task_flags:0x440140 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2c9/0x7f0
schedule+0x27/0xa0
schedule_preempt_disabled+0x15/0x30
rwsem_down_read_slowpath+0x278/0x4c0
down_read+0x59/0xb0
page_cache_ra_unbounded+0x65/0x1b0
filemap_get_pages+0x124/0x3e0
filemap_read+0x114/0x3d0
vfs_read+0x297/0x360
ksys_read+0x6c/0xe0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix adding folio to bio
>4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage
is supported, then 'offset' of folio can't be held in 'unsigned int',
cause warning in bio_add_folio_nofail() and IO failure.
Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't
be overflow, and folio can be added to bio successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: don't ignore IO flags
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path
If a shared IRQ is used by the driver due to platform limitation, then the
IRQ affinity hint is set right after the allocation of IRQ vectors in
ath12k_pci_msi_alloc(). This does no harm unless one of the functions
requesting the IRQ fails and attempt to free the IRQ.
This may end up with a warning from the IRQ core that is expecting the
affinity hint to be cleared before freeing the IRQ:
kernel/irq/manage.c:
/* make sure affinity_hint is cleaned up */
if (WARN_ON_ONCE(desc->affinity_hint))
desc->affinity_hint = NULL;
So to fix this issue, clear the IRQ affinity hint before calling
ath12k_pci_free_irq() in the error path. The affinity will be cleared once
again further down the error path due to code organization, but that does
no harm. |
