| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the file-sgi plugin in GIMP. When processing an RLE-compressed SGI image, the plugin allocates memory for a row table. The image header dimensions (ysize and zsize) are read as 16-bit unsigned integers. If a crafted file sets both dimensions to their maximum value (65535), the multiplication ysize * zsize overflows the standard 32-bit int boundary before being passed to calloc. This integer overflow issue results in undefined behavior, aborting the plugin and causing a denial of service. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts. |
| A flaw was found in GIMP. A remote attacker could exploit an integer overflow vulnerability in the FITS image loader by providing a specially crafted FITS file. This integer overflow leads to a zero-byte memory allocation, which is then subjected to a heap buffer overflow when processing pixel data. Successful exploitation could result in a denial of service (DoS) or potentially arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: inline: fix len overflow in ext4_prepare_inline_data
When running the following code on an ext4 filesystem with inline_data
feature enabled, it will lead to the bug below.
fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666);
ftruncate(fd, 30);
pwrite(fd, "a", 1, (1UL << 40) + 5UL);
That happens because write_begin will succeed as when
ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len
will be truncated, leading to ext4_prepare_inline_data parameter to be 6
instead of 0x10000000006.
Then, later when write_end is called, we hit:
BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
at ext4_write_inline_data.
Fix it by using a loff_t type for the len parameter in
ext4_prepare_inline_data instead of an unsigned int.
[ 44.545164] ------------[ cut here ]------------
[ 44.545530] kernel BUG at fs/ext4/inline.c:240!
[ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb
[ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[ 44.546523] PKRU: 55555554
[ 44.546523] Call Trace:
[ 44.546523] <TASK>
[ 44.546523] ext4_write_inline_data_end+0x126/0x2d0
[ 44.546523] generic_perform_write+0x17e/0x270
[ 44.546523] ext4_buffered_write_iter+0xc8/0x170
[ 44.546523] vfs_write+0x2be/0x3e0
[ 44.546523] __x64_sys_pwrite64+0x6d/0xc0
[ 44.546523] do_syscall_64+0x6a/0xf0
[ 44.546523] ? __wake_up+0x89/0xb0
[ 44.546523] ? xas_find+0x72/0x1c0
[ 44.546523] ? next_uptodate_folio+0x317/0x330
[ 44.546523] ? set_pte_range+0x1a6/0x270
[ 44.546523] ? filemap_map_pages+0x6ee/0x840
[ 44.546523] ? ext4_setattr+0x2fa/0x750
[ 44.546523] ? do_pte_missing+0x128/0xf70
[ 44.546523] ? security_inode_post_setattr+0x3e/0xd0
[ 44.546523] ? ___pte_offset_map+0x19/0x100
[ 44.546523] ? handle_mm_fault+0x721/0xa10
[ 44.546523] ? do_user_addr_fault+0x197/0x730
[ 44.546523] ? do_syscall_64+0x76/0xf0
[ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60
[ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90
[ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 44.546523] RIP: 0033:0x7f42999c6687
[ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
[ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012
[ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687
[ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003
[ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000
[ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix array overflow in st_setup()
Change the array size to follow parms size instead of a fixed value. |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: fix pipe accounting mismatch
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?) |
| A flaw was found in libarchive. On 32-bit systems, an integer overflow vulnerability exists in the zisofs block pointer allocation logic. A remote attacker can exploit this by providing a specially crafted ISO9660 image, which can lead to a heap buffer overflow. This could potentially allow for arbitrary code execution on the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix page_size variable overflow
Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to
unsigned long to support values larger than 31 and avoid overflow.
For example: If we try to register 4GB of memory that is contiguous in
physical memory, the driver will optimize the page_size and try to use
an mkey with 4GB entity size. The 'unsigned int' page_size variable will
overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr().
WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core]
CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 <0f> 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41
RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246
RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001
RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600
RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240
R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00
FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x81/0x130
? alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
? report_bug+0xfc/0x1e0
? handle_bug+0x55/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
create_real_mr+0x54/0x150 [mlx5_ib]
ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs]
ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs]
? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs]
? walk_system_ram_range+0x79/0xd0
? ___pte_offset_map+0x1b/0x110
? __pte_offset_map_lock+0x80/0x100
ib_uverbs_ioctl+0xac/0x110 [ib_uverbs]
__x64_sys_ioctl+0x94/0xb0
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb7ecf0737b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b
RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4
R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4
R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix crash when config small gso_max_size/gso_ipv4_max_size
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size. |
| A flaw was found in GIMP. This issue is a heap buffer over-read in GIMP PCX file loader due to an off-by-one error. A remote attacker could exploit this by convincing a user to open a specially crafted PCX image. Successful exploitation could lead to out-of-bounds memory disclosure and a possible application crash, resulting in a Denial of Service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_fq: fix integer overflow of "credit"
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf
An integer overflow occurs in the iwl_write_to_user_buf() function,
which is called by the iwl_dbgfs_monitor_data_read() function.
static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count,
void *buf, ssize_t *size,
ssize_t *bytes_copied)
{
int buf_size_left = count - *bytes_copied;
buf_size_left = buf_size_left - (buf_size_left % sizeof(u32));
if (*size > buf_size_left)
*size = buf_size_left;
If the user passes a SIZE_MAX value to the "ssize_t count" parameter,
the ssize_t count parameter is assigned to "int buf_size_left".
Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a
negative number, so "*size" is assigned "buf_size_left" and goes into
the third argument of the copy_to_user function, causing a heap overflow.
This is not a security vulnerability because iwl_dbgfs_monitor_data_read()
is a debugfs operation with 0400 privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix off-by-one errors in fast-commit block filling
Due to several different off-by-one errors, or perhaps due to a late
change in design that wasn't fully reflected in the code that was
actually merged, there are several very strange constraints on how
fast-commit blocks are filled with tlv entries:
- tlvs must start at least 10 bytes before the end of the block, even
though the minimum tlv length is 8. Otherwise, the replay code will
ignore them. (BUG: ext4_fc_reserve_space() could violate this
requirement if called with a len of blocksize - 9 or blocksize - 8.
Fortunately, this doesn't seem to happen currently.)
- tlvs must end at least 1 byte before the end of the block. Otherwise
the replay code will consider them to be invalid. This quirk
contributed to a bug (fixed by an earlier commit) where uninitialized
memory was being leaked to disk in the last byte of blocks.
Also, strangely these constraints don't apply to the replay code in
e2fsprogs, which will accept any tlvs in the blocks (with no bounds
checks at all, but that is a separate issue...).
Given that this all seems to be a bug, let's fix it by just filling
blocks with tlv entries in the natural way.
Note that old kernels will be unable to replay fast-commit journals
created by kernels that have this commit. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to 1.11.2, switch_xml_ampencode() reserved only ten bytes for the widest numeric character reference produced from a four-byte UTF-8 sequence, omitting space for the terminating NUL. When remote-supplied text was serialized at the exact buffer-growth boundary, the terminator wrote one byte beyond the heap allocation. Reachable surfaces include mod_xml_cdr, conference and formatted CDR XML, XML Event Socket output, and XML API output that serializes caller-controlled values. The fixed zero-byte write can abort the process or truncate an adjacent object, while remote code execution has not been demonstrated. This issue is fixed in version 1.11.2. |
| In multiple functions of ubsan_throwing_runtime.cpp, there is a possible way to cause the system to crash due to an integer overflow. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of ubsan_throwing_runtime.cpp, there is a possible way to cause a crash due to an integer overflow. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible way to achieve code execution due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
