| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins Coverage Plugin 3.3358.v9487dde48783 and earlier does not validate the coverage results ID when a job configuration is submitted through the REST API, allowing attackers with Item/Configure permission to use a javascript: scheme URL as identifier, resulting in a stored cross-site scripting (XSS) vulnerability. |
| Jenkins OWASP Dependency-Check Plugin 5.6.4 and earlier does not escape CWE values from Dependency-Check reports on the Jenkins UI, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission. |
| Jenkins Robot Framework Plugin 6.2.2 and earlier does not check that the archive directory configured for Robot Framework report files is contained within the build directory on the Jenkins controller, allowing attackers with Item/Configure permission to create or replace arbitrary files on the Jenkins controller file system with attacker-specified content, which can lead to remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller. |
| Jenkins Keycloak Authentication Plugin 2.4.1 and earlier does not restrict the redirect URL after login, allowing attackers to perform phishing attacks. |
| Sentry Seer is vulnerable to a multi-stage trust-boundary violation that allows unauthenticated attacker-controlled telemetry to become code that is executed by an agent in a privileged automation environment. An external attacker can submit fabricated Sentry events without having access to the victim’s Sentry account, source repository, or infrastructure. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readField in read.go reads the length of an AMQP byte-array field with type tag x into a signed int32 and passes the value directly to make when allocating the field buffer. A malicious or compromised broker can encode a value such as 0xFFFFFFFF, which becomes -1 and causes a len out of range runtime panic. The panic escapes the network reader goroutine and terminates the client process, including during connection.start server properties or message header table parsing. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readLongstr in read.go returns an empty string and a nil error when a declared AMQP longstr length exceeds 0x7FFFFFFF instead of returning ErrSyntax. The function leaves the declared field bytes unread, while readTable treats the operation as successful and continues parsing from the wrong offset. A malicious or compromised broker can provide an oversized longstr in a table field and desynchronize subsequent AMQP parsing, causing attacker-controlled trailing bytes to be interpreted as later fields or frames and disrupting connection integrity and availability. This issue is fixed in version 1.13.0. |
| RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.dispatch in channel.go, confirms.confirm in confirms.go, and Connection.dispatch0 in connection.go synchronously send publisher confirmations, flow-control events, consumer cancellations, returned messages, including NotifyConfirm events and connection block notifications, to application-provided channels. If a listener channel is unbuffered, full, or not drained promptly, the sole reader goroutine blocks and stops processing frames, acknowledgments, deliveries, and heartbeats. Broker-driven event bursts can therefore cause connection stalls, missed heartbeats, deadlocks, and disconnection. This issue is fixed in version 1.13.0. |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's stateful Streamable HTTP server in crates/rmcp/src/transport/streamable_http_server/tower.rs allows an unauthenticated client to send a well-formed JSON-RPC POST that is not an initialization request, or an initialization request with a mismatched protocol header, causing StreamableHttpService::handle_post to call LocalSessionManager.create_session before validating the message. An early validation failure returns without removing the inserted LocalSessionHandle from LocalSessionManager.sessions, permanently retaining session and channel state for the server process lifetime. Repeated requests can grow the shared session table without bound, degrade legitimate-client latency through lock contention, exhaust memory, and terminate the server. This issue is fixed in version 2.0.0. |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's OAuth implementation in crates/rmcp/src/transport/auth.rs omits the RFC 9728 resource field from ResourceServerMetadata and allows discover_oauth_server_via_resource_metadata to use protected-resource metadata without confirming that the returned resource identifier exactly matches the configured MCP server. A malicious MCP server can publish metadata for a different legitimate MCP resource and its authorization server, causing a victim who connects and completes the authorization flow to obtain a legitimate access token that the client subsequently sends to the malicious server. The attacker can capture the token and impersonate the victim against the legitimate MCP resource within the token's granted scopes. This issue is fixed in version 2.0.0. |
| Mattermost Desktop App versions <=6.2 6.2.2.0 Fixed an issue where Mattermost Desktop did not sufficiently restrict server-rendered content from accessing local or private network resources. Thanks to game0v3r for contributing to this improvement under the Mattermost responsible disclosure policy. Mattermost Advisory ID: MMSA-2026-00698 |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.34.0, AMQConnection.start() applies Math.min(maxInboundMessageBodySize, frameMax) after Connection.Tune negotiation even though AMQP defines frameMax value zero as unlimited and ConnectionFactory.DEFAULT_FRAME_MAX is zero. When the client default and server-negotiated value are both zero, the result is passed to Utils.framePayloadLimit(int), which interprets zero as Integer.MAX_VALUE and disables the configured maxInboundMessageBodySize cap. A malicious AMQP server, or a man-in-the-middle attacker able to modify Connection.Tune and inject frames into the connection, can then send an oversized frame of any frame type, causing Frame.readFrom() to allocate a large byte array before content-level validation and potentially terminate the client process through memory exhaustion. This issue is fixed in version 5.34.0. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: serialize device reference release in struct_ops destroy path
__hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the
same registration reference, double-putting struct hid_device and
freeing it while hid_destroy_device() still uses it. Serialize the
remove/NULL decision under hdev->bpf.prog_list_lock so exactly one
path releases each registration reference: unreg re-checks ops->hdev
under the lock and returns without putting when the destroy path
already cleared it; all put_device() calls happen after the lock is
dropped, which is safe because a concurrent unreg then observes
ops->hdev == NULL under the lock.
Background: each successful attach (hid_bpf_ops_reg) acquires one
device reference (hid_get_device()). Two paths can release it:
- device destruction: hid_destroy_device() -> hid_bpf_destroy_device()
-> __hid_bpf_ops_destroy_device(), which walks hdev->bpf.prog_list
under rcu_read_lock() and drops one reference per attached program;
- BPF link release: bpf map delete (no BPF_F_LINK) synchronously calls
st_ops->unreg() -> hid_bpf_unreg(), which drops the reference for
its own registration.
The coordination handshake (e->hdev = NULL on the destroy side vs
"if (!hdev) return" on the unreg side) is a TOCTOU check: the two
paths run under different lock domains (rcu_read_lock vs
prog_list_lock), so a concurrent unreg can read ops->hdev as
non-NULL, block on prog_list_lock, and then proceed while the
destroy traversal executes - both paths then drop the same
reference. The refcount reaches zero legitimately (each decrement
is individually valid), so no refcount_t saturation fires: the
device is simply freed while the transport is still inside
hid_destroy_device(), and subsequent teardown touches freed memory.
The fix serializes the remove/NULL decision under prog_list_lock on
both sides and moves the destroy-side puts outside the lock. With
the lock held, plain reads/writes of ops->hdev are sufficient; no
READ_ONCE/WRITE_ONCE are added, keeping the patch minimal.
Unlocked-read safety: the unlocked read of ops->hdev at the top of
hid_bpf_unreg() cannot touch a freed device, because the unreg path
itself still holds this registration's reference (released only by
its own hid_put_device() after the lock is dropped), and a destroy
traversal that already cleared ops->hdev makes the lock-internal
re-check return early without any put. At most one of the two
paths releases each registration reference. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Have show_event_filters/triggers files take trace array ref
The newly added files show_event_filters and show_event_triggers that show
all filters or triggers that are set within the trace array do not take a
reference for the trace array it is showing. Without taking a reference,
the trace_array may be freed via "rmdir" while a task is reading one of
theses files. Those files iterate all the events within an instance
(trace_array) and nothing prevents that instance from being freed while
its data is being read. This causes a use-after-free crash.
Have the open of both those files take the trace_array reference via the
trace_array_get() that prevents the trace_array from being freed while the
files are opened. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but
dev->state is checked after acquiring the lock. Therefore a concurrent
bind can change the device state between these operations, which can
leave ioctl with a stale NULL gadget pointer and causing a NULL pointer
dereference at gadget->ops->ioctl.
Read dev->gadget while holding dev->lock so that the gadget pointer
and device state are sampled consistently. |
| ScadaLTS 2.8.1-release-candidate build 0 is affected by an Authenticated Remote Code Execution via Scripting Sandbox Bypass
The DWR "DataSourceEditDwr" class exposes the "validateScript" method that compiles and executes attacker-supplied JavaScript via the Rhino scripting engine. There are no authorization checks on this method and so it is possible for an attacker with access to a low privilege user to abuse this flaw by leveraging the DWR routing bypass. |
| ScadaLTS 2.8.1-release-candidate build 0 is affected by an Authorization Bypass
Spring Security gates DWR endpoints by URL path pattern, but DWR itself dispatches method calls based on the POST body parameters c0-scriptName and c0-methodName. The crossDomainSessionSecurity setting in web.xml is set to false, which disables DWR's built-in origin validation. This means any authenticated user can invoke any DWR method (regardless of the URL-based access control) by sending their request to a URL they are permitted to access (e.g. MiscDwr.initializeLongPoll.dwr) while targeting a restricted class in the POST body.
This is the systemic root cause that enables multiple other findings to be exploited as a low privilege user. |
