| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer
set_attribute() populates the security area of the BIOS attribute request
buffer with the current admin password via populate_security_buffer(), then
dumps the whole request buffer with print_hex_dump_bytes(). This can expose
the plaintext admin password in the kernel log.
The same issue was fixed for the password attribute path by
commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump
plaintext password data"). Remove the remaining dump from the BIOS
attribute path. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate level in perf mask ioctls
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the per-level offset table on
invalid ioctl input. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
isst_if_clos_assoc() validates the user-supplied socket_id with
'socket_id > topology_max_packages()', but isst_common.sst_inst[] is
allocated with topology_max_packages() entries, so the valid index range
is [0, topology_max_packages()). The '>' comparison lets
socket_id == topology_max_packages() pass and index one entry past the
array.
In addition, isst_common.sst_inst[socket_id] is NULL for an in-range
package that has no bound TPMI SST instance, and the pointer is used
without a NULL check. Both the out-of-bounds entry and the NULL pointer
are then dereferenced by map_partition_power_domain_id() and the
following power_domain_info access.
Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching
the checks already performed by get_instance(). |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt and cancels
carddet_work before unmapping. carddet_work can re-enable the device
interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it
again after cancelling the work.
This issue was found by an in-house static analysis tool and confirmed by
manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate logical CPU id and clos id
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int1092: Fix potential memory leak in sar_probe()
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
from the EC, and drop a malformed event before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
sk_store() and kek_store() strip a trailing newline from the sysfs
write before allocating the key buffer:
length = count;
if (buf[length - 1] == '\n')
length--;
bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL);
but then pass the original "count" (not "length") as the copy size to
hp_wmi_perform_query(), which memcpy()s that many bytes out of the
"length"-sized allocation, reading one byte past it whenever the write
ends in a newline, the normal case for a shell "echo" into sysfs.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg]
Read of size 28 at addr ffff88813c8e2b80 by task python3/16022
...
sk_store+0xa7/0x240 [hp_bioscfg]
kernfs_fop_write_iter+0x3e1/0x5d0
...
The buggy address is located 0 bytes inside of
allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b)
Reproduced identically for kek_store, and at multiple write sizes
(28, 57, 201 bytes), each time reading exactly one byte past a
kmemdup() allocation one byte smaller than the write.
Fix by passing "length" instead of "count" to hp_wmi_perform_query()
in both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
validate_password_input() computes length = strlen(buf) and then
checks buf[length - 1] to strip a trailing newline, without checking
that length is nonzero first. Writing an empty string (a bare '\n')
to current_password or new_password gives length == 0, and
buf[length - 1] reads buf[-1], one byte before the heap allocation
holding the copied input.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
Read of size 1 at addr ffff88811bd8da9f by task sh/13740
...
store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
current_password_store+0x14/0x20 [hp_bioscfg]
...
The buggy address is located 23 bytes to the right of
allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88)
Reproduced identically via new_password_store. Execution continues
past the bad read (the garbage byte only affects whether "length" is
decremented by one), so the write completes and returns success; this
is a pure information read past the buffer, not a crash, but it is
still an out-of-bounds access KASAN correctly flags.
Fix by only checking buf[length - 1] when length is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer()
hp_get_string_from_buffer() clamps the converted string length against
the destination buffer size with "size > dst_size", so when the
converted length is exactly equal to dst_size, conv_dst_size is left
at dst_size and the unconditional NUL terminator write
dst[conv_dst_size] = 0;
lands one byte past the destination buffer. This is the same shape of
bug as the previously fixed off-by-one in hp_convert_hexstr_to_str():
the buffer is sized correctly for the content, but the terminator
write is never checked against that size.
Fix by changing the comparison to ">=" so conv_dst_size is always left
with room for the terminator.
All fixed-size destinations that reach this function (path[512],
current_value[512], current_password/current_value[64], and the
per-entry buffers in encodings[][512] and prerequisites[][512]) are
affected. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: pass validated element count to package parsers
The per-type package parsers are handed the wrong element count.
hp_init_bios_package_attribute() validates obj->package.count and then
calls one of the five hp_populate_*_package_data() wrappers (string,
integer, enumeration, ordered list, password). Each wrapper forwards a
count to its hp_populate_*_elements_from_package() parser, but instead
of forwarding the validated obj->package.count it derives the count
from elements[0]. elements[0] is the NAME field and is always an
ACPI_TYPE_STRING, so reading ->package.count from it in fact reads
->string.length through the union acpi_object. The parsers thus bound
themselves against the length of the name string rather than against
the real number of elements in the package.
This is safe today because hp_init_bios_package_attribute() refuses any
package that has fewer than the type's element count, so a parser only
ever runs on a full package and never reads past it regardless of the
bogus bound.
An upcoming change relaxes that check to accept shorter packages. Once
a parser can receive fewer elements than its per-type count, a bound
taken from the name length no longer reflects the array size, and the
"elem < count" loop conditions and "elem + n >= count" sub-loop guards
read past the end of elements[] - an out-of-bounds heap read.
Forward the validated obj->package.count to every *_package_data()
wrapper so the parsers bound themselves against the real package size.
This does not change behaviour for the packages that enumerate
correctly today and is a prerequisite for accepting shorter packages
safely. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: honor task_work cancellation
io_waitid_cb() may run through the fallback task_work path when
task_work_add() can no longer queue work to the originating task. The
fallback runs from a kworker and io_uring marks such task work as
canceled through tw.cancel.
io_waitid_cb() currently ignores tw.cancel and calls __do_wait().
waitid is task-context dependent: __do_wait() performs child lookup
relative to current, and the retry path also uses
current->signal->wait_chldexit. If the callback runs from the fallback
kworker, current is therefore not the task that submitted the request.
Honor tw.cancel before entering __do_wait(). Complete the request with
-ECANCELED and skip the siginfo copy, since canceled task work may run
without the submitting task's userspace execution context.
Keep the existing siginfo handling for normal waitid completion and
explicit cancellation. |
| In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will traverse or modify these corrupted lists, triggering
a slab use afterfree.
KASAN report showing the vulnerability when reproducing via debugfs:
BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc
Write of size 8 at addr fff000000d43f748 by task sh/1
...
Call trace:
kasan_report+0xac/0xfc
path_find+0x6f8/0xcfc
icc_get+0x148/0x380
icc_get_set+0xf8/0x2d0
...
Freed by task 1:
kfree+0x1a0/0x4a4
icc_get+0x2cc/0x380
icc_get_set+0xf8/0x2d0
Fix this by replacing kfree(path) with the proper teardown function,
icc_put(path), which safely removes the requests from the req_list using
hlist_del() and drops the provider usage references before freeing the
memory.
Additionally, in icc_get(), ensure that the icc_lock mutex is released
prior to calling icc_put(path) to avoid a deadlock, as icc_put()
internally acquires the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path, ipmi_add_smi() logs "Unable to get the device id"
and goes to out_err_started, where it invokes the lower driver's
shutdown callback. try_smi_init() then logs the returned registration
failure:
ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5
ipmi_si IPI0001:00: Unable to register device: error -5
For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up
the SI state machine data, frees smi_info->si_sm, and sets
smi_info->si_sm and smi_info->intf to NULL.
However, intf->in_shutdown is not set on this failed-registration
rollback path. Therefore, the asynchronous redo_bmc_reg work item can
still retry BMC device-id probing after the lower driver has already
cleared its SI state machine data. In the observed case, that retry path
reached start_next_msg(), which passed the NULL smi_info->si_sm pointer
to the selected KCS state machine handler:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
Workqueue: events redo_bmc_reg [ipmi_msghandler]
RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si]
Call Trace:
start_next_msg+0x50/0x80 [ipmi_si]
check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si]
sender+0x69/0x80 [ipmi_si]
i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler]
__get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler]
__bmc_get_device_id+0xef/0x950 [ipmi_msghandler]
redo_bmc_reg+0x52/0x60 [ipmi_msghandler]
process_one_work+0x1a7/0x360
Set intf->in_shutdown on the out_err_started path before invoking the
lower driver's shutdown callback. This prevents later redo_bmc_reg
retries from using an interface whose lower driver state has been
cleaned up, and applies the same shutdown state to other IPMI interfaces
as well. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_userid, even on a guest that also has a HiperSockets device
carrying the same identifier. The child socket created by
afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and
transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV.
The socket delivered to accept() is unusable.
Second, a frame arriving on one netdev can be delivered to a socket bound
to a different IQD device. Which can lead to
- Accept-queue exhaustion (DoS)
- Attacker-controlled peer identity in the child socket
- Data injection into existing sockets
- Fabric noise on the IQD fabric, where bogus replies are sent
- killing established connections
Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls
sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a
namespace can be delivered to an IUCV socket. So a process in an
unprivileged user and network namespace holding only the CAP_NET_RAW
capability valid within that namespace can send a raw ETH_P_AF_IUCV frame
on its own lo device and have it matched against init_net sockets.
Fix all three by skipping any socket whose hs_dev does not match the
ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress
dev is never NULL, so classic sockets are skipped automatically. An unbound
HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket
is only reachable from the exact IQD device it was bound to. Because hs_dev
is always a device in init_net (iucv_sock_bind() scans
for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress
device belongs to another namespace never matches any socket.
Note that AF_IUCV over HiperSockets provides no per-connection
authentication: no sequence numbers, no TLS, no nonce. The four name fields
identifying a connection are exchanged in plaintext on the shared
HiperSockets segment (VCHID). Any host on the same HiperSockets segment
could spoof any frame type against an existing connection. That is a
protocol-level property unchanged by this patch. The fix reduces the attack
surface to peers present on the same HiperSockets segment. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: fix zero-copy frame layout
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect callers already handle a
NULL conversion result.
BUG: KASAN: slab-out-of-bounds in skb_gro_receive
Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146
Call Trace:
skb_gro_receive (net/core/gro.c:174)
udp_gro_receive (net/ipv4/udp_offload.c:812)
inet_gro_receive (net/ipv4/af_inet.c:1539)
dev_gro_receive (net/core/gro.c:515)
gro_receive_skb (net/core/gro.c:633)
cpu_map_kthread_run (kernel/bpf/cpumap.c:395)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
if (dev->priv_destructor)
dev->priv_destructor(dev); /* slip_devs[i] = NULL */
if (dev->needs_free_netdev)
free_netdev(dev);
...
/* Free network device */
kobject_put(&dev->dev.kobj);
So rtnl_lock() does not serialise slip_open() against the teardown at
all. sl_sync() can load slip_devs[i] while the entry is still published
and dereference it after netdev_run_todo() has run the destructor and
released the device:
CPU0 (slip_open) CPU1 (slip_close)
unregister_netdev()
rtnl_unlock()
netdev_run_todo()
__rtnl_unlock()
rtnl_lock()
sl_sync()
dev = slip_devs[i]
priv_destructor(dev)
slip_devs[i] = NULL
kobject_put(&dev->dev.kobj)
/* dev is freed */
sl = netdev_priv(dev)
if (sl->tty || sl->leased) /* use-after-free */
BUG: KASAN: use-after-free in sl_sync drivers/net/slip/slip.c:730 [inline]
BUG: KASAN: use-after-free in slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
Read of size 1 at addr ffff8880712dac71 by task syz-executor.2/6506
CPU: 2 PID: 6506 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00260-g0c8fc3469765 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
sl_sync drivers/net/slip/slip.c:730 [inline]
slip_open+0xef4/0x1210 drivers/net/slip/slip.c:806
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
tiocsetd drivers/tty/tty_io.c:2428 [inline]
tty_ioctl+0x5f0/0x1530 drivers/tty/tty_io.c:2712
Allocated by task 6502:
alloc_netdev_mqs+0x98/0xfe0 net/core/dev.c:10719
sl_alloc drivers/net/slip/slip.c:756 [inline]
slip_open+0x36d/0x1210 drivers/net/slip/slip.c:817
tty_ldisc_open+0xa2/0x120 drivers/tty/tty_ldisc.c:433
tty_set_ldisc+0x324/0x720 drivers/tty/tty_ldisc.c:564
Freed by task 6497:
device_release+0xa2/0x240 drivers/base/core.c:2507
kobject_put+0x179/0x280 lib/kobject.c:729
netdev_run_todo+0x6c8/0xef0 net/core/dev.c:10509
slip_close+0x166/0x1c0 drivers/net/slip/slip.c:906
tty_ldisc_close+0x113/0x1a0 drivers/tty/tty_ldisc.c:456
tty_ldisc_kill+0x94/0x160 drivers/tty/tty_ldisc.c:614
tty_ldisc_release+0xe3/0x2b0 drivers/tty/tty_ldisc.c:782
tty_release+0xbcc/0xe70 drivers/tty/tty_io.c:1860
Commit e58c19124189 ("slip: Fix use-after-free Read in slip_open") fixed
a different source of stale entries - a device left in slip_devs[] after
slip_open() freed it on the registration error path - and does not
address this race, which is why the report survives it.
Drop the entry from ndo_uninit instead. unregister_netdevice() calls
ndo_uninit under RTNL, before the device is queued to netdev_run_todo(),
so an entry that sl_sync() can still see while holding RTNL belongs to a
device that cannot be freed until RTNL is dropped. sl_free_netdev()
stays only for the slip_open() error path, where register_netdevice()
may have failed before ndo_init and ndo_uninit is then not called
either. Both running for the same device is harmless: the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: bound receive headroom
tun_get_user() uses tun->align both as skb headroom and when choosing how
much packet data to keep linear. OVS can propagate an oversized headroom
request from another port to TUN or TAP.
When align is larger than the usable space in a one-page skb head,
SKB_MAX_HEAD(align) underflows and the result becomes negative when stored
in good_linear. That value later wraps when assigned to the size_t linear
variable, and tun_alloc_skb() can place skb->data outside the allocated
head.
Bound the headroom stored by TUN to the one-page skb-head budget and the
largest non-sentinel 16-bit skb header offset. Leave one linear byte for
raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN.
Also pull the raw-TUN protocol byte and the TAP Ethernet header before
accessing them, so these checks remain safe for nonlinear skbs supplied by
other allocation paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix flow mask use-after-free on flow deletion
The commit in the Fixes tag below made so flow->mask free is scheduled
via RCU right after it is removed from the flow table. The pointer
stays in the flow structure and it can be accessible while in the same
RCU critical section. This is done to avoid requiring ovs_mutex for
the ovs_flow_free().
However, while removing the flow during processing of CMD_DEL, we do
not take RCU read lock before the removal, and ovs_flow_cmd_fill_info()
uses the flow->mask pointer afterwards. The RCU read lock is taken,
but it's already late at that point. The comment on that line
acknowledges that the lock is cosmetic and doesn't serve a real purpose.
This leads to use-after-free if the RCU grace period passes between
removal and the filling. It is a short race window, but it is there
and can lead to a real crash in case memory allocation for the info
takes a bit longer:
BUG: KASAN: slab-use-after-free in __ovs_nla_put_key
net/openvswitch/flow_netlink.c:1996
BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30
net/openvswitch/flow_netlink.c:2250
Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487
Call Trace:
<TASK>
__ovs_nla_put_key net/openvswitch/flow_netlink.c:1996
ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250
ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930
ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
</TASK>
Allocated by task 9487:
mask_alloc net/openvswitch/flow_table.c:967
flow_mask_insert net/openvswitch/flow_table.c:1012
ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084
ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086
...
netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556
Freed by task 9485:
rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645
rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897
handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622
...
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062
ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info()
to avoid this race. This also helps with cleaning up the forced cast
and the cosmetic RCU read lock. Before the commit in the Fixes tag the
order did not matter as long as the flow object itself was not freed.
A wider RCU critical section could be another option, but we have a
GFP_KERNEL allocation in the way.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042. |
