| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size()
When the else branch of cifs_file_set_size() finds a writable file handle
via find_writable_file(), it borrows tcon and server from the handle's
tlink, attempts the handle-based set_file_size() RPC, and then releases
the handle with cifsFileInfo_put().
If set_file_size() fails, execution falls through to the path-based
fallback, which reuses the borrowed tcon and server under the
"if (tcon == NULL)" guard. Since tcon is not NULL at that point, the
guard is skipped. If cifsFileInfo_put() dropped the last reference on a
tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE
cleared, as happens during reconnection or session teardown),
cifs_put_tlink() will have freed tcon; the subsequent set_path_size()
call is then a use-after-free.
Setting tcon = NULL after cifsFileInfo_put() causes the existing guard
to take the cifs_sb_tlink() path, which acquires a fresh reference for
the path-based operation or fails cleanly if the session is gone. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC
cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it
cannot use cifs_resize_file_locked() to perform a proper fscache cookie
resize. Instead, add cifs_invalidate_cache() after cifs_setsize().
cifs_invalidate_cache() calls fscache_invalidate(), which works without
holding i_rwsem: it unconditionally increments inval_counter and sets
FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not
served once the cookie is later activated by fscache_use_cookie().
Truncation to zero leaves no valid cached data, making invalidation the
correct semantic here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2
When a valid primary TRANSACT2 response has been received (mid->resp_buf
set, mid->multiRsp true) and a subsequent secondary response causes
cifs_check_trans2() to return false -- either because the SMB header is
invalid (malformed != 0) or because check2ndT2() rejects the PDU --
handle_mid() overwrites mid->resp_buf with the new buffer (leaking the
primary buffer) and, because mid->multiRsp is set, skips the
server->smallbuf/bigbuf NULL-out. When the user thread frees
mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the
demux thread reuses it for the next packet, resulting in a use-after-free.
Combine both early-exit conditions and, when mid->multiRsp is already
set, abort the pending transaction inline: set multiEnd, call
dequeue_mid() with malformed=true, and return true so handle_mid() exits
without touching mid->resp_buf or the server buffer pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: only rebind the reopened file's own oplock on durable reconnect
ksmbd_reopen_durable_fd() walks the inode's m_op_list and rebinds every
detached oplock to the reconnecting session:
list_for_each_entry_rcu(op, &ci->m_op_list, op_entry,
lockdep_is_held(&ci->m_lock)) {
if (op->conn)
continue;
op->conn = ksmbd_conn_get(fp->conn);
op->sess = work->sess;
}
The only key is op->conn == NULL, which every detached durable handle on
that inode matches, not just the one owned by fp. When two sessions hold
durable handles on the same file and both disconnect, reconnecting one of
them adopts the other session's oplock: op->sess is overwritten with the
reconnecting session without taking a reference on it, while op->conn
pins the connection.
The sibling teardown path, session_fd_check(), keys on the identity of
the connection being torn down (op->conn == conn) rather than on shared
state, and so does not have this problem.
Once the adopting session is destroyed, ksmbd_session_destroy() frees it
while the foreign oplock still points at it. The reader in
ksmbd_close_fd_app_instance_id() validates only opinfo->conn, which is
still live thanks to the reference taken above, and then dereferences the
stale session:
if (!opinfo->conn) {
up_read(&fp->f_ci->m_lock);
goto out;
}
ft = &opinfo->sess->file_table;
write_lock(&ft->lock);
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x74/0xd0
Write of size 4 at addr ffff88810a970528 by task kworker/0:0/9
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
_raw_write_lock+0x74/0xd0
ksmbd_close_fd_app_instance_id+0x183/0x410
smb2_open+0x1346/0x4430
handle_ksmbd_work+0x2bb/0x7b0
Reached from an authenticated session against a share with the default
durable-handle and oplock configuration: two sessions open the same file
with a durable-v2 handle and an RH lease under distinct AppInstanceIds,
both log off, one reconnects with DH2C, and a later durable-v2 create
carrying the other AppInstanceId walks into the freed session.
Constrain the loop to the oplock owned by the file being reopened. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: restore the data_offset bound in is_valid_oplock_break()
Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr")
changed the quantity this bound is measured against. It used to be
srv->total_read minus the 4-byte RFC1002 preamble that total_read then
included, so it was the SMB message length. The same commit stopped
counting the preamble, and the mechanical substitution to
srv->total_read - srv->pdu_size left an expression that is identically
zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly
pdu_length - MID_HEADER_SIZE() more, adding both to total_read.
len is therefore 0, the subtraction below it wraps, and no __u32
DataOffset can exceed the result, so the check from commit 097f5863b1a0
("cifs: read overflow in is_valid_oplock_break()") no longer rejects
anything. Use total_read, which is now the message length on its own. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: validate report size before copy
write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap
buffer allocated in quickspi_alloc_report_buf() to the device-descriptor
derived max_report_len (a few hundred bytes for a touch controller). It
copies the caller-supplied report into that buffer:
memcpy(write_buf->content, report_buf, report_buf_len);
The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and
quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches
the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a
report larger than max_report_len therefore overflows report_buf with
attacker-controlled length and content.
Record the report_buf allocation size and reject reports that do not fit
before copying, matching the equivalent guard in the intel-quicki2c
sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix.
write_cmd_to_txdma() writes the output report header ahead of the content
in the same buffer, so size the allocation to cover the header as well.
That keeps the added bound from rejecting a maximum-sized report. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the free-cluster bitmap scan to the volume
vol->lcn_empty_bits_per_page is sized from vol->nr_clusters at mount, but
ntfs_cluster_alloc() bounds its scan of that array by the size of $Bitmap.
Those are independent on-disk quantities and the mount-time check only
rejects a $Bitmap that is too small, so an image whose $Bitmap covers more
clusters than the volume has lets the scan index past the array. A run
whose LCN lies in that gap takes the allocator straight there, since the
caller passes the file's own last LCN as its locality hint. KASAN reports
a slab out-of-bounds read when a file on such a volume is extended.
Clamp the scan to what that array covers, mirroring the max_index
calculation the mount-time scan already uses, and reject a decoded LCN
at or beyond nr_clusters in the mapping pairs decoder. Conforming
volumes are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid empty mapping pairs
Reject an attribute with empty mapping pairs if it has inconsistent
highest VCN and size. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid MFT LCNs from boot sector
The NTFS boot sector stores the MFT and MFTMirr locations as unsigned
64-bit LCNs, but parse_ntfs_boot_sector() decoded them into an s64.
A crafted high-bit value could therefore become negative and pass
the existing upper-bound check. The invalid value then propagated into
the MFT zone allocator and could result in an out-of-bounds access to
lcn_empty_bits_per_page. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate non-resident attribute offsets
ntfs_attr_update_meta() shifts the attribute name when converting between
non-sparse and sparse attributes. Converting to sparse also adds the
compressed_size field before the name and mapping pairs, requiring eight
additional bytes in the attribute record.
However, the validator does not check that name_offset is within safe
boundaries for these operations or that the additional space is available.
A malicious MFT record could set name_offset such that:
1. The name is positioned at the very end of a non-sparse attribute.
Converting to sparse would shift the name forward by 8 bytes,
writing beyond the attribute boundary.
2. The name overlaps with the mapping pairs, causing corruption during
conversion.
Add validation to ensure:
- For named attributes, name_offset is within valid bounds
- Name does not extend beyond the attribute or overlap with mapping pairs
- For non-sparse, non-compressed attributes, eight bytes are available
after mapping_pairs_offset for the compressed_size field
The space check also covers unnamed attributes, for which name_offset = 0
is valid and no name range needs to be checked. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: verify run length exceeding volume boundary
The mapping pairs decoder validates that the starting LCN is within the
volume but does not check if the run extends beyond the volume boundary.
A malformed NTFS image with a crafted mapping pairs array could cause
the kernel to access memory beyond the volume boundary, potentially leading
to memory corruption and privilege escalation.
Add validation to ensure lcn + length stays within nr_clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix use-after-free of file range info
fsnotify_pre_content() builds its file_range on the triggering task's
stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the
heap-allocated permission event so copy_range_info_to_user() can report
the offset later.
The event reader can set the event state to FAN_EVENT_REPORTED and then
sleep while preparing the file descriptor. If a signal interrupts the
triggering task at that point, fanotify_get_response() changes the state
to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack
frame while the reader still owns the event. The reader then dereferences
pevent->ppos and copies the stale stack value to userspace.
KASAN reported:
BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970
Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95
Call Trace:
fanotify_read+0x293e/0x2970
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Store the range position directly in the permission event and use
FANOTIFY_NO_RANGE when range information is unavailable. The event remains
alive until the reader finishes, so the reported offset no longer depends
on the triggering task's stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: GHES: fix ARM section length accounting after header
In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm
header with (err + 1), the remaining length was reduced by sizeof(err)
(pointer size) instead of sizeof(*err) (structure size).
That overestimates the bytes left for cper_arm_err_info records and can
let the parser read past the CPER section when err_info_num is large
enough relative to error_data_length.
Use sizeof(*err) so the length accounting matches the pointer advance
and the earlier sizeof(*err) size check. |
| In the Linux kernel, the following vulnerability has been resolved:
block: validate user space vectors during extraction
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix per-CPU address resolution into an extended register
The destination of the per-CPU address MOV is encoded in ModRM.reg,
which is extended by REX.R, but the REX prefix is built with
add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and
this instruction addresses memory as disp32 with no base, so the bit
has no effect at all and the high register bit is simply lost.
Every is_ereg() destination therefore resolves to the wrong register,
picking whichever one shares the low three bits:
R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI
With BPF_REG_5, whose reg2hex is 0, the emitted
65 49 03 04 25 <off> add %gs:<off>,%rax
adds the per-CPU offset to RAX rather than R8. The destination keeps
the unadjusted address and RAX is clobbered, so the program goes on to
dereference a pointer that was never made per-CPU:
BUG: unable to handle page fault for address: 0000607e386a8894
RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9
Call Trace:
__bpf_prog_test_run_raw_tp+0x2dc/0x7d0
__flush_smp_call_function_queue+0x1e9/0xc80
Kernel panic - not syncing: Fatal exception in interrupt
R5 is the mildest of the four, aliasing a scratch register and faulting
at the store. R7 aliases RBP and would corrupt the frame pointer, R8
and R9 alias the argument registers.
Use add_2mod() so the register goes through REX.R, matching how
add_2reg() places it in ModRM.reg and how emit_priv_frame_ptr()
hardcodes 0x4c for the same instruction with R9. Encodings for the
non-extended registers are unchanged.
Problem showed up when trying to resurrect BPF_GCC CI (selftests built
with BPF_GCC).
This has gone unnoticed because clang reloads the address into R1
before each per-CPU access, so the destination is never an extended
register. GCC keeps several per-CPU addresses live at once, and
test_progs-bpf_gcc panics the kernel in global_percpu_data/init, where
the address of a .percpu variable ends up in R5. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: bound fwctl command payload to the input buffer
fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len)
and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc()
ignores in_len and never checks the user-controlled op_size against it.
cxlctl_set_feature() bounds op_size only from below
(op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr)
bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len
and a large op_size the first memcpy() already reads past the
kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox
payload and sent to the device, and a large enough op_size can walk into
unmapped memory and oops the kernel. The Get paths pin op_size to a fixed
size but likewise read the input struct without checking in_len.
Reject, at the single dispatch point, any request whose fixed header plus
op_size does not fit in the copied-in buffer. The lower-bound test guards
the subtraction and ensures op_size was copied in before it is read. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mce: Make the MCE notifier per-region
Flavien Solt reported lifetime issues with the CXL MCE notifier, which
can lead to NULL dereferences and use-after-free in the MCE handler.
The notifier was registered per memory device and stored in 'struct
cxl_memdev_state', even though it only needs the region state (the
region's SPA range and its extended linear cache size).
Instead of keeping the memory device and endpoint alive, the correct fix
is to move the notifier into 'struct cxl_region' and register it from
cxl_region_probe() as it should be a per-region notifier. Setup the
registration to only happen for regions that have an extended linear
cache as that is the only current usage.
Remove cxl_port_get_spa_cache_alias() as it is now dead code.
[ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix still_degraded being inverted in raid10_sync_request()
Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into
bitmap_operations") converted still_degraded from int to bool, but
inverted the assignment in the loop that checks whether the array will
still be degraded after the current device is recovered:
"still_degraded = 1" became "still_degraded = false".
As a result, recovering a device while another mirror is still missing
calls md_bitmap_start_sync() with degraded == false, which clears bitmap
bits that the still-missing device needs. When that device is re-added,
its bitmap-based recovery finds the bits already cleared and skips every
region written while the array was degraded, so it is marked In_sync
while holding stale data: silent corruption.
Reproducer (raid10 near=2, 4 disks, internal bitmap):
- fail and remove one disk of each mirror pair
- write to the degraded array
- re-add both disks and let recovery finish
- "check" reports mismatch_cnt=262272 after 256 MiB of degraded
writes and file contents differ; the second disk's "recovery"
completes in milliseconds because everything is skipped
The same conversion in raid1 got it right (still_degraded = true).
Restore the correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: close backchannel before destroying callback service
A backchannel receive can complete a request while the NFS callback
service is being torn down. xprt_complete_bc_request() removes the
request from bc_pa_list, drops bc_alloc_count, marks the request in use,
and then asks xprt_enqueue_bc_request() to hand it to the callback
service.
If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request()
currently returns without enqueueing or freeing the committed request.
The xprt_get() taken on entry is leaked as well. If the producer wins
the race before bc_serv is cleared, it can also enqueue onto sv_cb_list
after nfs_callback_down() has stopped the callback threads, leaving the
request linked to a svc_serv that is about to be freed.
Close the producer side before callback threads are stopped. Add
xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call
it on callback shutdown and callback-start failure before stopping the
service threads. Requests that lose the NULL transition in
xprt_enqueue_bc_request() are released through the normal backchannel
free path after balancing bc_slot_count. Finally, drain any remaining
sv_cb_list requests after the callback threads have stopped and before
svc_destroy() frees the service. |
