| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix lz4 inplace decompression
Currently EROFS can map another compressed buffer for inplace
decompression, that was used to handle the cases that some pages of
compressed data are actually not in-place I/O.
However, like most simple LZ77 algorithms, LZ4 expects the compressed
data is arranged at the end of the decompressed buffer and it
explicitly uses memmove() to handle overlapping:
__________________________________________________________
|_ direction of decompression --> ____ |_ compressed data _|
Although EROFS arranges compressed data like this, it typically maps two
individual virtual buffers so the relative order is uncertain.
Previously, it was hardly observed since LZ4 only uses memmove() for
short overlapped literals and x86/arm64 memmove implementations seem to
completely cover it up and they don't have this issue. Juhyung reported
that EROFS data corruption can be found on a new Intel x86 processor.
After some analysis, it seems that recent x86 processors with the new
FSRM feature expose this issue with "rep movsb".
Let's strictly use the decompressed buffer for lz4 inplace
decompression for now. Later, as an useful improvement, we could try
to tie up these two buffers together in the correct order. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Don't unref the same fb many times by mistake due to deadlock handling
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix uaf in smb20_oplock_break_ack
drop reference after use opinfo. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix bounds limiting when given a malformed entity
If we're given a malformed entity in drm_sched_entity_init()--shouldn't
happen, but we verify--with out-of-bounds priority value, we set it to an
allowed value. Fix the expression which sets this limit. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length
If the host sends an H2CData command with an invalid DATAL,
the kernel may crash in nvmet_tcp_build_pdu_iovec().
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp]
Call trace:
process_one_work+0x174/0x3c8
worker_thread+0x2d0/0x3e8
kthread+0x104/0x110
Fix the bug by raising a fatal error if DATAL isn't coherent
with the packet size.
Also, the PDU length should never exceed the MAXH2CDATA parameter which
has been communicated to the host in nvmet_tcp_handle_icreq(). |
| In the Linux kernel, the following vulnerability has been resolved:
hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
When the optional PRE_COPY support was added to speed up the device
compatibility check, it failed to update the saving/resuming data
pointers based on the fd offset. This results in migration data
corruption and when the device gets started on the destination the
following error is reported in some cases,
[ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
[ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010
[ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f
[ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found
[ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found
[ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Defer the free of inner map when necessary
When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.
Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOBs in smb2_parse_contexts()
Validate offsets and lengths before dereferencing create contexts in
smb2_parse_contexts().
This fixes following oops when accessing invalid create contexts from
server:
BUG: unable to handle page fault for address: ffff8881178d8cc3
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 4a01067 P4D 4a01067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs]
Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00
00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7
7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00
RSP: 0018:ffffc900007939e0 EFLAGS: 00010216
RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90
RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000
RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000
R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000
R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22
FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x181/0x480
? search_module_extables+0x19/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x1b6/0x1c0
? asm_exc_page_fault+0x26/0x30
? smb2_parse_contexts+0xa0/0x3a0 [cifs]
SMB2_open+0x38d/0x5f0 [cifs]
? smb2_is_path_accessible+0x138/0x260 [cifs]
smb2_is_path_accessible+0x138/0x260 [cifs]
cifs_is_path_remote+0x8d/0x230 [cifs]
cifs_mount+0x7e/0x350 [cifs]
cifs_smb3_do_mount+0x128/0x780 [cifs]
smb3_get_tree+0xd9/0x290 [cifs]
vfs_get_tree+0x2c/0x100
? capable+0x37/0x70
path_mount+0x2d7/0xb80
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__x64_sys_mount+0x11a/0x150
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f8737657b1e |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate session id and tree id in the compound request
This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bound read in smb2_write
ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If
->NextCommand is bigger than Offset + Length of smb2 write, It will
allow oversized smb2 write length. It will cause OOB read in smb2_write. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix slab-out-of-bounds in r_page
When PAGE_SIZE is 64K, if read_log_page is called by log_read_rst for
the first time, the size of *buffer would be equal to
DefaultLogPageSize(4K).But for *buffer operations like memcpy,
if the memory area size(n) which being assigned to buffer is larger
than 4K (log->page_size(64K) or bytes(64K-page_off)), it will cause
an out of boundary error.
Call trace:
[...]
kasan_report+0x44/0x130
check_memory_region+0xf8/0x1a0
memcpy+0xc8/0x100
ntfs_read_run_nb+0x20c/0x460
read_log_page+0xd0/0x1f4
log_read_rst+0x110/0x75c
log_replay+0x1e8/0x4aa0
ntfs_loadlog_and_replay+0x290/0x2d0
ntfs_fill_super+0x508/0xec0
get_tree_bdev+0x1fc/0x34c
[...]
Fix this by setting variable r_page to NULL in log_read_rst. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a6xx: Fix kvzalloc vs state_kcalloc usage
adreno_show_object() is a trap! It will re-allocate the pointer it is
passed on first call, when the data is ascii85 encoded, using kvmalloc/
kvfree(). Which means the data *passed* to it must be kvmalloc'd, ie.
we cannot use the state_kcalloc() helper.
This partially reverts commit ec8f1813bf8d ("drm/msm/a6xx: Replace
kcalloc() with kvzalloc()"), but adds the missing kvfree() to fix the
memory leak that was present previously. And adds a warning comment.
Patchwork: https://patchwork.freedesktop.org/patch/507014/ |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
The type of sk_rcvbuf and sk_sndbuf in struct sock is int, and
in tcp_add_backlog(), the variable limit is caculated by adding
sk_rcvbuf, sk_sndbuf and 64 * 1024, it may exceed the max value
of int and overflow. This patch reduces the limit budget by
halving the sndbuf to solve this issue since ACK packets are much
smaller than the payload. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Finish converting the NFSv2 GETACL result encoder
The xdr_stream conversion inadvertently left some code that set the
page_len of the send buffer. The XDR stream encoders should handle
this automatically now.
This oversight adds garbage past the end of the Reply message.
Clients typically ignore the garbage, but NFSD does not need to send
it, as it leaks stale memory contents onto the wire. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix memleak in alloc_ns()
After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add overflow check for attribute size
The offset addition could overflow and pass the used size check given an
attribute with very large size (e.g., 0xffffff7f) while parsing MFT
attributes. This could lead to out-of-bound memory R/W if we try to
access the next attribute derived by Add2Ptr(attr, asize)
[ 32.963847] BUG: unable to handle page fault for address: ffff956a83c76067
[ 32.964301] #PF: supervisor read access in kernel mode
[ 32.964526] #PF: error_code(0x0000) - not-present page
[ 32.964893] PGD 4dc01067 P4D 4dc01067 PUD 0
[ 32.965316] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 32.965727] CPU: 0 PID: 243 Comm: mount Not tainted 5.19.0+ #6
[ 32.966050] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 32.966628] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.967239] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.968101] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.968364] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.968651] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.968963] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.969249] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.969870] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.970655] FS: 00007fdab8189e40(0000) GS:ffff9569fdc00000(0000) knlGS:0000000000000000
[ 32.971098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 32.971378] CR2: ffff956a83c76067 CR3: 0000000002c58000 CR4: 00000000000006f0
[ 32.972098] Call Trace:
[ 32.972842] <TASK>
[ 32.973341] ni_enum_attr_ex+0xda/0xf0
[ 32.974087] ntfs_iget5+0x1db/0xde0
[ 32.974386] ? slab_post_alloc_hook+0x53/0x270
[ 32.974778] ? ntfs_fill_super+0x4c7/0x12a0
[ 32.975115] ntfs_fill_super+0x5d6/0x12a0
[ 32.975336] get_tree_bdev+0x175/0x270
[ 32.975709] ? put_ntfs+0x150/0x150
[ 32.975956] ntfs_fs_get_tree+0x15/0x20
[ 32.976191] vfs_get_tree+0x2a/0xc0
[ 32.976374] ? capable+0x19/0x20
[ 32.976572] path_mount+0x484/0xaa0
[ 32.977025] ? putname+0x57/0x70
[ 32.977380] do_mount+0x80/0xa0
[ 32.977555] __x64_sys_mount+0x8b/0xe0
[ 32.978105] do_syscall_64+0x3b/0x90
[ 32.978830] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 32.979311] RIP: 0033:0x7fdab72e948a
[ 32.980015] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 32.981251] RSP: 002b:00007ffd15b87588 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 32.981832] RAX: ffffffffffffffda RBX: 0000557de0aaf060 RCX: 00007fdab72e948a
[ 32.982234] RDX: 0000557de0aaf260 RSI: 0000557de0aaf2e0 RDI: 0000557de0ab7ce0
[ 32.982714] RBP: 0000000000000000 R08: 0000557de0aaf280 R09: 0000000000000020
[ 32.983046] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000557de0ab7ce0
[ 32.983494] R13: 0000557de0aaf260 R14: 0000000000000000 R15: 00000000ffffffff
[ 32.984094] </TASK>
[ 32.984352] Modules linked in:
[ 32.984753] CR2: ffff956a83c76067
[ 32.985911] ---[ end trace 0000000000000000 ]---
[ 32.986555] RIP: 0010:mi_enum_attr+0x44/0x110
[ 32.987217] Code: 89 f0 48 29 c8 48 89 c1 39 c7 0f 86 94 00 00 00 8b 56 04 83 fa 17 0f 86 88 00 00 00 89 d0 01 ca 48 01 f0 8d 4a 08 39 f9a
[ 32.988232] RSP: 0018:ffffba15c06a7c38 EFLAGS: 00000283
[ 32.988532] RAX: ffff956a83c76067 RBX: ffff956983c76050 RCX: 000000000000006f
[ 32.988916] RDX: 0000000000000067 RSI: ffff956983c760e8 RDI: 00000000000001c8
[ 32.989356] RBP: ffffba15c06a7c38 R08: 0000000000000064 R09: 00000000ffffff7f
[ 32.989994] R10: 0000000000000007 R11: ffff956983c760e8 R12: ffff95698225e000
[ 32.990415] R13: 0000000000000000 R14: ffffba15c06a7cd8 R15: ffff95698225e170
[ 32.991011] FS:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fsi: occ: Prevent use after free
Use get_device and put_device in the open and close functions to
make sure the device doesn't get freed while a file descriptor is
open.
Also, lock around the freeing of the device buffer and check the
buffer before using it in the submit function. |
