| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Clean up integer overflow checking in map_user_pages()
The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().
The encode_dma() had two checks:
if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
return -EINVAL;
The in_trans->addr variable is the starting address. The in_trans->size
variable is the total size of the transfer. The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.
This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).
I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size. If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense. If there are zero bytes
remaining to be copied, just return success.
The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts. First check that "in_trans->addr +
resources->xferred_dma_size" is safe. Then check that "xfer_start_addr +
remaining" is safe.
My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits. So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit
systems. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Fix out-of-bounds access when allocating config buffers
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858) |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "f2fs: fix to do sanity check on extent cache correctly"
syzbot reports a f2fs bug as below:
UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19
index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]')
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
inline_data_addr fs/f2fs/f2fs.h:3275 [inline]
__recover_inline_status fs/f2fs/inode.c:113 [inline]
do_read_inode fs/f2fs/inode.c:480 [inline]
f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604
f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601
mount_bdev+0x276/0x3b0 fs/super.c:1391
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
do_new_mount+0x28f/0xae0 fs/namespace.c:3335
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue was bisected to:
commit d48a7b3a72f121655d95b5157c32c7d555e44c05
Author: Chao Yu <[email protected]>
Date: Mon Jan 9 03:49:20 2023 +0000
f2fs: fix to do sanity check on extent cache correctly
The root cause is we applied both v1 and v2 of the patch, v2 is the right
fix, so it needs to revert v1 in order to fix reported issue.
v1:
commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/[email protected]/
v2:
commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidraw: fix data race on device refcount
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b02 ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: deal with integer overflows in kmalloc_reserve()
Blamed commit changed:
ptr = kmalloc(size);
if (ptr)
size = ksize(ptr);
size = kmalloc_size_roundup(size);
ptr = kmalloc(size);
This allowed various crash as reported by syzbot [1]
and Kyle Zeng.
Problem is that if @size is bigger than 0x80000001,
kmalloc_size_roundup(size) returns 2^32.
kmalloc_reserve() uses a 32bit variable (obj_size),
so 2^32 is truncated to 0.
kmalloc(0) returns ZERO_SIZE_PTR which is not handled by
skb allocations.
Following trace can be triggered if a netdev->mtu is set
close to 0x7fffffff
We might in the future limit netdev->mtu to more sensible
limit (like KMALLOC_MAX_SIZE).
This patch is based on a syzbot report, and also a report
and tentative fix from Kyle Zeng.
[1]
BUG: KASAN: user-memory-access in __build_skb_around net/core/skbuff.c:294 [inline]
BUG: KASAN: user-memory-access in __alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
Write of size 32 at addr 00000000fffffd10 by task syz-executor.4/22554
CPU: 1 PID: 22554 Comm: syz-executor.4 Not tainted 6.1.39-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Call trace:
dump_backtrace+0x1c8/0x1f4 arch/arm64/kernel/stacktrace.c:279
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:286
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x120/0x1a0 lib/dump_stack.c:106
print_report+0xe4/0x4b4 mm/kasan/report.c:398
kasan_report+0x150/0x1ac mm/kasan/report.c:495
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
memset+0x40/0x70 mm/kasan/shadow.c:44
__build_skb_around net/core/skbuff.c:294 [inline]
__alloc_skb+0x3c4/0x6e8 net/core/skbuff.c:527
alloc_skb include/linux/skbuff.h:1316 [inline]
igmpv3_newpack+0x104/0x1088 net/ipv4/igmp.c:359
add_grec+0x81c/0x1124 net/ipv4/igmp.c:534
igmpv3_send_cr net/ipv4/igmp.c:667 [inline]
igmp_ifc_timer_expire+0x1b0/0x1008 net/ipv4/igmp.c:810
call_timer_fn+0x1c0/0x9f0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x54c/0x710 kernel/time/timer.c:1790
run_timer_softirq+0x28/0x4c kernel/time/timer.c:1803
_stext+0x380/0xfbc
____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:79
call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:891
do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:84
invoke_softirq kernel/softirq.c:437 [inline]
__irq_exit_rcu+0x1c0/0x4cc kernel/softirq.c:683
irq_exit_rcu+0x14/0x78 kernel/softirq.c:695
el0_interrupt+0x7c/0x2e0 arch/arm64/kernel/entry-common.c:717
__el0_irq_handler_common+0x18/0x24 arch/arm64/kernel/entry-common.c:724
el0t_64_irq_handler+0x10/0x1c arch/arm64/kernel/entry-common.c:729
el0t_64_irq+0x1a0/0x1a4 arch/arm64/kernel/entry.S:584 |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix potential array out-of-bounds in decoder queue_setup
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
syzbot is hitting WARN_ON() in hfsplus_cat_{read,write}_inode(), for
crafted filesystem image can contain bogus length. There conditions are
not kernel bugs that can justify kernel to panic. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: Fix memory leak in devm_clk_notifier_register()
devm_clk_notifier_register() allocates a devres resource for clk
notifier but didn't register that to the device, so the notifier didn't
get unregistered on device detach and the allocated resource was leaked.
Fix the issue by registering the resource through devres_add().
This issue was found with kmemleak on a Chromebook. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: call disconnect callback before deleting conn
In hci_cs_disconnect, we do hci_conn_del even if disconnection failed.
ISO, L2CAP and SCO connections refer to the hci_conn without
hci_conn_get, so disconn_cfm must be called so they can clean up their
conn, otherwise use-after-free occurs.
ISO:
==========================================================
iso_sock_connect:880: sk 00000000eabd6557
iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da
...
iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073
hci_dev_put:1487: hci0 orig refcnt 17
__iso_chan_add:214: conn 00000000b6251073
iso_sock_clear_timer:117: sock 00000000eabd6557 state 3
...
hci_rx_work:4085: hci0 Event packet
hci_event_packet:7601: hci0: event 0x0f
hci_cmd_status_evt:4346: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3107: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560
hci_conn_unlink:1102: hci0: hcon 000000001696f1fd
hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2
hci_chan_list_flush:2780: hcon 000000001696f1fd
hci_dev_put:1487: hci0 orig refcnt 21
hci_dev_put:1487: hci0 orig refcnt 20
hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c
... <no iso_* activity on sk/conn> ...
iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557
BUG: kernel NULL pointer dereference, address: 0000000000000668
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth
==========================================================
L2CAP:
==================================================================
hci_cmd_status_evt:4359: hci0: opcode 0x0406
hci_cs_disconnect:2760: hci0: status 0x0c
hci_sent_cmd_data:3085: hci0 opcode 0x0406
hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585
hci_conn_unlink:1102: hci0: hcon ffff88800c999000
hci_chan_list_flush:2780: hcon ffff88800c999000
hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280
...
BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth]
Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175
CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xf8/0x180
? hci_send_acl+0x2d/0x540 [bluetooth]
kasan_report+0xa8/0xe0
? hci_send_acl+0x2d/0x540 [bluetooth]
hci_send_acl+0x2d/0x540 [bluetooth]
? __pfx___lock_acquire+0x10/0x10
l2cap_chan_send+0x1fd/0x1300 [bluetooth]
? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth]
? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth]
? lock_release+0x1d5/0x3c0
? mark_held_locks+0x1a/0x90
l2cap_sock_sendmsg+0x100/0x170 [bluetooth]
sock_write_iter+0x275/0x280
? __pfx_sock_write_iter+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
do_iter_readv_writev+0x176/0x220
? __pfx_do_iter_readv_writev+0x10/0x10
? find_held_lock+0x83/0xa0
? selinux_file_permission+0x13e/0x210
do_iter_write+0xda/0x340
vfs_writev+0x1b4/0x400
? __pfx_vfs_writev+0x10/0x10
? __seccomp_filter+0x112/0x750
? populate_seccomp_data+0x182/0x220
? __fget_light+0xdf/0x100
? do_writev+0x19d/0x210
do_writev+0x19d/0x210
? __pfx_do_writev+0x10/0x10
? mark_held_locks+0x1a/0x90
do_syscall_64+0x60/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
? do_syscall_64+0x6c/0x90
? lockdep_hardirqs_on_prepare+0x149/0x210
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7ff45cb23e64
Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cpumap: Handle skb as well when clean up ptr_ring
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully". |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/perf: add sentinel to xehp_oa_b_counters
Arrays passed to reg_in_range_table should end with empty record.
The patch solves KASAN detected bug with signature:
BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
Read of size 4 at addr ffffffffa1555d90 by task perf/1518
CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1
Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023
Call Trace:
<TASK>
...
xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915]
(cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: lpass: Fix for KASAN use_after_free out of bounds
When we run syzkaller we get below Out of Bounds error.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110
Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144
CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W
Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
print_address_description+0x30/0x2d8
kasan_report+0x178/0x1e4
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf8/0x5a0
_regmap_read+0x45c/0x86c
_regmap_update_bits+0x128/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_put_dec_enum+0x1d0/0x268
snd_ctl_elem_write+0x288/0x474
By Error checking and checking valid values issue gets rectifies. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix unpinning of pages when an access is present
syzkaller found that the calculation of batch_last_index should use
'start_index' since at input to this function the batch is either empty or
it has already been adjusted to cross any accesses so it will start at the
point we are unmapping from.
Getting this wrong causes the unmap to run over the end of the pages
which corrupts pages that were never mapped. In most cases this triggers
the num pinned debugging:
WARNING: CPU: 0 PID: 557 at drivers/iommu/iommufd/pages.c:294 __iopt_area_unfill_domain+0x152/0x560
Modules linked in:
CPU: 0 PID: 557 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__iopt_area_unfill_domain+0x152/0x560
Code: d2 0f ff 44 8b 64 24 54 48 8b 44 24 48 31 ff 44 89 e6 48 89 44 24 38 e8 fc d3 0f ff 45 85 e4 0f 85 eb 01 00 00 e8 0e d2 0f ff <0f> 0b e8 07 d2 0f ff 48 8b 44 24 38 89 5c 24 58 89 18 8b 44 24 54
RSP: 0018:ffffc9000108baf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffffffff821e3f85
RDX: 0000000000000000 RSI: ffff88800faf0000 RDI: 0000000000000002
RBP: ffffc9000108bd18 R08: 000000000003ca25 R09: 0000000000000014
R10: 000000000003ca00 R11: 0000000000000024 R12: 0000000000000004
R13: 0000000000000801 R14: 00000000000007ff R15: 0000000000000800
FS: 00007f3499ce1740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000243 CR3: 00000000179c2001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
iopt_area_unfill_domain+0x32/0x40
iopt_table_remove_domain+0x23f/0x4c0
iommufd_device_selftest_detach+0x3a/0x90
iommufd_selftest_destroy+0x55/0x70
iommufd_object_destroy_user+0xce/0x130
iommufd_destroy+0xa2/0xc0
iommufd_fops_ioctl+0x206/0x330
__x64_sys_ioctl+0x10e/0x160
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Also add some useful WARN_ON sanity checks. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix deletion race condition
System crash when using debug kernel due to link list corruption. The cause
of the link list corruption is due to session deletion was allowed to queue
up twice. Here's the internal trace that show the same port was allowed to
double queue for deletion on different cpu.
20808683956 015 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1
20808683957 027 qla2xxx [0000:13:00.1]-e801:4: Scheduling sess ffff93ebf9306800 for deletion 50:06:0e:80:12:48:ff:50 fc4_type 1
Move the clearing/setting of deleted flag lock. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix missing initialisation affecting gcm-aes-s390
Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to point
to the scatterlist array in areq->first_rsgl.sgl.sgl.
Without this, the gcm-aes-s390 driver will oops when it tries to do
gcm_walk_start() on req->dst because req->dst is set to the value of
areq->first_rsgl.sgl.sgl by _aead_recvmsg() calling
aead_request_set_crypt().
The problem comes if an empty ciphertext is passed: the loop in
af_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsgl
up.
This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as far
as I can tell, that ignores req->dst and only uses req->src[*].
[*] Is this a bug in aesni-intel_glue.c?
The s390x oops looks something like:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000a00000000 TEID: 0000000a00000803
Fault in home space mode while using kernel ASCE.
AS:00000000a43a0007 R3:0000000000000024
Oops: 003b ilc:2 [#1] SMP
...
Call Trace:
[<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390]
[<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8
[<00000000a2a60888>] aead_recvmsg+0x478/0x698
[<00000000a2e519a0>] sock_recvmsg+0x70/0xb0
[<00000000a2e51a56>] sock_read_iter+0x76/0xa0
[<00000000a273e066>] vfs_read+0x26e/0x2a8
[<00000000a273e8c4>] ksys_read+0xbc/0x100
[<00000000a311d808>] __do_syscall+0x1d0/0x1f8
[<00000000a312ff30>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390] |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix mid leak during reconnection after timeout threshold
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix multiple LUN_RESET handling
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up
running commands when it hasn't. The bug was added in commit 51ec502a3266
("target: Delete tmr from list before processing").
The problem occurs when:
1. We have N I/O cmds running in the target layer spread over 2 sessions.
2. The initiator sends a LUN_RESET for each session.
3. session1's LUN_RESET loops over all the running commands from both
sessions and moves them to its local drain_task_list.
4. session2's LUN_RESET does not see the LUN_RESET from session1 because
the commit above has it remove itself. session2 also does not see any
commands since the other reset moved them off the state lists.
5. sessions2's LUN_RESET will then complete with a successful response.
6. sessions2's inititor believes the running commands on its session are
now cleaned up due to the successful response and cleans up the running
commands from its side. It then restarts them.
7. The commands do eventually complete on the backend and the target
starts to return aborted task statuses for them. The initiator will
either throw a invalid ITT error or might accidentally lookup a new
task if the ITT has been reallocated already.
Fix the bug by reverting the patch, and serialize the execution of
LUN_RESETs and Preempt and Aborts.
Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list,
because it turns out the original patch fixed a bug that was not
mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second
LUN_RESET and wait on it. Then the second reset will run
core_tmr_drain_tmr_list and see the first reset and wait on it resulting in
a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: Gadget: core: Help prevent panic during UVC unconfigure
Avichal Rakesh reported a kernel panic that occurred when the UVC
gadget driver was removed from a gadget's configuration. The panic
involves a somewhat complicated interaction between the kernel driver
and a userspace component (as described in the Link tag below), but
the analysis did make one thing clear: The Gadget core should
accomodate gadget drivers calling usb_gadget_deactivate() as part of
their unbind procedure.
Currently this doesn't work. gadget_unbind_driver() calls
driver->unbind() while holding the udc->connect_lock mutex, and
usb_gadget_deactivate() attempts to acquire that mutex, which will
result in a deadlock.
The simple fix is for gadget_unbind_driver() to release the mutex when
invoking the ->unbind() callback. There is no particular reason for
it to be holding the mutex at that time, and the mutex isn't held
while the ->bind() callback is invoked. So we'll drop the mutex
before performing the unbind callback and reacquire it afterward.
We'll also add a couple of comments to usb_gadget_activate() and
usb_gadget_deactivate(). Because they run in process context they
must not be called from a gadget driver's ->disconnect() callback,
which (according to the kerneldoc for struct usb_gadget_driver in
include/linux/usb/gadget.h) may run in interrupt context. This may
help prevent similar bugs from arising in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: scu: use _safe list iterator to avoid a use after free
This loop is freeing "clk" so it needs to use list_for_each_entry_safe().
Otherwise it dereferences a freed variable to get the next item on the
loop. |
