| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_info_copy()
When debug_register_static() fails, it clears areas, active_pages and
active_entries but leaves the area bounds unchanged. Copying such an
area, either by opening its view file or via debug_dump(), makes
debug_info_copy() dereference the NULL pointers.
Skip the copy loop when the source has no areas. |
| Use after free in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally. |
| Double free in Windows Wired AutoConfig Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the expectation.
Make sure that helpers are called at the end after all the other
extensions are already added.
Note that the helper rejection now leaves the mark and labels set,
but that's not different from how the NAT was handled before or how
the mark and the labels were handled on confirmation failure. And
there are no atomicity guarantees provided by the API anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
Fix 3 leaks in macb_alloc() error paths:
- Tx buffer allocated but crossing a 4G boundary: Tx leaked.
- Rx buffer allocation fails: Tx leaked.
- Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked.
This is because our error handling calls macb_free(bp) which in turn
frees the buffers stored in bp->queues[0], but nothing has been stored
in there. Fix by storing allocated buffers into bp->queues[0] ASAP. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: arp: terminate device name before lookup
The ARP ioctl copies a user-provided struct arpreq into a stack object. Its
arp_dev field may contain IFNAMSIZ bytes without a NUL terminator.
Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where
strcmp() can read past the end of the stack object when a matching
alternative interface name exists.
Terminate the field before the lookup to prevent the out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Terminate the fgraph_data list when the reservation is not filled
fprobe_fgraph_entry() reserves shadow stack space for every fprobe with
an exit handler, but only fills it for those whose entry handler returns
0. fgraph_reserve_data() does not clear the area, so fprobe_return()
parses the unused tail as headers left over from an earlier call, and an
exit handler can run twice or despite its entry handler asking to skip
it.
Write a zero word after the last entry to terminate the walk. A zeroed
slot does not decode to a NULL fprobe on the arches that encode the
header into one unsigned long, since arch_decode_fprobe_header_fp() ORs
in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL
for a zeroed slot. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT
Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added
NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which
rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with
-ERANGE.
However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user
sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits
FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and
parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0,
sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with
fou->protocol == 0.
In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb()
triggers IP protocol resubmission when fou->protocol > 0, whereas
returning 0 tells the UDP tunnel layer that the skb was consumed without
freeing it. When fou->protocol == 0, every packet received on the socket
returns 0 from fou_udp_recv() and leaks the sk_buff.
Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that
creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with
-EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share
parse_nl_config()) unaffected.
Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic
Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE =
FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel,
FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and
fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks
all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to
59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected
with -EINVAL (-22). |
| In the Linux kernel, the following vulnerability has been resolved:
bna: prevent IOC timer rearm during teardown
bna: prevent IOC timer rearm during teardown
bnad_pci_remove() and the probe disable_ioceth path call
timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for
iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after
free_netdev() has freed the struct bnad.
Deleting iocpf_timer last does not fix this. sem_timer and
iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm
iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from
bfa_ioc_hw_sem_get() when the semaphore is busy.
timer_delete_sync() only waits out its own callback.
bnad_ioceth_disable() can time out and leave that callback live.
Shut all four IOC timers down with timer_shutdown_sync() on both
paths, so a later mod_timer() is ignored.
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: bound the ATA passthru sense descriptor writes
When an ATA PASS-THROUGH command to an ATAPI device fails, the sense
buffer holds the device's REQUEST SENSE reply, and
ata_scsi_set_passthru_sense_fields() trusts its additional length
byte, sb[7], when adding the ATA Status Return descriptor. A faulty
or malicious device can use that to make the kernel read and write
past the 96-byte buffer in three ways:
- scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so
its clamp against sb[7] does nothing and the walk runs off the end.
- A type-9 descriptor found near the end is filled in unchecked.
- A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14,
so len 75..82 writes up to 8 bytes past the end.
Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE
reply patched:
BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210
BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50
Both are gone with this patch, and a valid descriptor is still filled
in. |
| Heap-based buffer overflow in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Photoshop Desktop is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
