| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Juniper Enhanced jdhcpd daemon may experience high CPU utilization, or crash and restart upon receipt of an invalid IPv6 UDP packet. Both high CPU utilization and repeated crashes of the jdhcpd daemon can result in a denial of service as DHCP service is interrupted. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D12, 14.1X53-D38, 14.1X53-D40 on QFX, EX, QFabric System; 15.1 prior to 15.1F2-S18, 15.1R4 on all products and platforms; 15.1X49 prior to 15.1X49-D80 on SRX; 15.1X53 prior to 15.1X53-D51, 15.1X53-D60 on NFX, QFX, EX. |
| An issue was discovered in certain Apple products. iOS before 10.3 is affected. macOS before 10.12.4 is affected. tvOS before 10.2 is affected. watchOS before 3.2 is affected. The issue involves the "CoreText" component. It allows remote attackers to cause a denial of service (resource consumption) via a crafted text message. |
| SoftCo with software V200R003C20,eSpace U1910 with software V200R003C00, V200R003C20 and V200R003C30,eSpace U1911 with software V200R003C20, V200R003C30,eSpace U1930 with software V200R003C20 and V200R003C30,eSpace U1960 with software V200R003C20, V200R003C30,eSpace U1980 with software V200R003C20, V200R003C30,eSpace U1981 with software V200R003C20 and V200R003C30 have an denial of service (DoS) vulnerability, which allow an attacker with specific permission to craft a file containing malicious data and upload it to the device to exhaust memory, causing a DoS condition. |
| P9 Plus smartphones with software versions earlier before VIE-AL10BC00B386 have a denial of service (DoS) vulnerability. An attacker tricks a user into installing a malicious application on the smart phone, and the application can send given parameter to specific interface, which make a large number of memory allocation and the smart phone will be crash for memory exhaustion. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the detection engine reassembly of Secure Sockets Layer (SSL) packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the Snort process consumes a high level of CPU resources. Affected Products: This vulnerability affects Cisco Firepower System Software running software releases 6.0.0, 6.1.0, 6.2.0, or 6.2.1 when the device is configured with an SSL policy that has at least one rule specifying traffic decryption. More Information: CSCvc58563. Known Affected Releases: 6.0.0 6.1.0 6.2.0 6.2.1. |
| The implementation of the OSPF protocol in VMware NSX-V Edge 6.2.x prior to 6.2.8 and NSX-V Edge 6.3.x prior to 6.3.3 doesn't correctly handle the link-state advertisement (LSA). A rogue LSA may exploit this issue resulting in continuous sending of LSAs between two routers eventually going in loop or loss of connectivity. |
| A Resource Consumption issue was discovered in Trihedral VTScada Versions prior to 11.2.26. The client does not properly validate the input or limit the amount of resources that are utilized by an attacker, which can be used to consume more resources than are available. |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator software version 12.0.0 - 12.1.2, 11.6.0 - 11.6.1, 11.4.0 - 11.5.4, 11.2.1, when ConfigSync is configured, attackers on adjacent networks may be able to bypass the TLS protections usually used to encrypted and authenticate connections to mcpd. This vulnerability may allow remote attackers to cause a denial-of-service (DoS) attack via resource exhaustion. |
| An issue was discovered in certain Apple products. iOS before 11 is affected. macOS before 10.13 is affected. tvOS before 11 is affected. watchOS before 4 is affected. The issue involves the "libc" component. It allows remote attackers to cause a denial of service (resource consumption) via a crafted string that is mishandled by the glob function. |
| A vulnerability in the network stack of MikroTik Version 6.38.5 released 2017-03-09 could allow an unauthenticated remote attacker to exhaust all available CPU via a flood of TCP RST packets, preventing the affected router from accepting new TCP connections. |
| An issue was discovered in Schneider Electric Conext ComBox, model 865-1058, all firmware versions prior to V3.03 BN 830. A series of rapid requests to the device may cause it to reboot. |
| Memory leak in the virgl_cmd_resource_unref function in hw/display/virtio-gpu-3d.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (host memory consumption) via a large number of VIRTIO_GPU_CMD_RESOURCE_UNREF commands sent without detaching the backing storage beforehand. |
| Memory leak in the megasas_handle_dcmd function in hw/scsi/megasas.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (host memory consumption) via MegaRAID Firmware Interface (MFI) commands with the sglist size set to a value over 2 Gb. |
| In Apache Tomcat 9.0.0.M1 to 9.0.0.M18 and 8.5.0 to 8.5.12, the handling of an HTTP/2 GOAWAY frame for a connection did not close streams associated with that connection that were currently waiting for a WINDOW_UPDATE before allowing the application to write more data. These waiting streams each consumed a thread. A malicious client could therefore construct a series of HTTP/2 requests that would consume all available processing threads. |
| The ReadMAGICKImage function in coders/magick.c in ImageMagick 7.0.6-4 allows remote attackers to cause a denial of service (memory leak) via a crafted file. |
| In ImageMagick 7.0.6-1, a memory exhaustion vulnerability was found in the function ReadSUNImage in coders/sun.c, which allows attackers to cause a denial of service. |
| In ImageMagick 7.0.6-1, a memory exhaustion vulnerability was found in the function ReadMPCImage in coders/mpc.c, which allows attackers to cause a denial of service. |
| In ImageMagick 7.0.6-1, a memory exhaustion vulnerability was found in the function ReadMIFFImage in coders/miff.c, which allows attackers to cause a denial of service. |
