| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| rdesktop through 1.9.0 contains a heap out-of-bounds read vulnerability in process_plane() in bitmap.c that allows malicious RDP servers to crash clients by sending malformed 32 bpp compressed bitmaps. Attackers can declare a large bitmap geometry with a short compressed body in bitmap update PDUs or bitmap cache orders, causing unbounded reads past the receive buffer and denial of service. |
| An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outside the address space authorized by the unicast-route validation procedure. With validation enabled on the receiving flow6 channel, BIRD fails to reject a destination prefix component with a nonzero offset, contrary to RFC 8956 section 5. It validates a reconstructed prefix with zero-filled skipped bits, although the original FlowSpec component can match a broader set of IPv6 addresses. Given a suitable unicast route from the peer, the rule can pass validation and, where export policy permits, be propagated to downstream peers. Downstream enforcement may cause unauthorized traffic filtering or redirection. |
| libstrophe through 0.14.0 contains a stack-based buffer overflow vulnerability in SCRAM_Hi that allows malicious XMPP servers to overflow a 128-byte stack buffer by sending an oversized SCRAM salt. Attackers can send a server-first-message whose s= attribute decodes to more than 124 bytes, aborting the client or overwriting stack memory in NDEBUG builds. |
| An issue was discovered on Tektronix 3 Series MDO devices before 1.21.1. An OS command injection vulnerability exists in the FILESystem:MOUNT:DRIve SCPI command handler. Insufficient neutralization of user-supplied input allows remote attackers to execute arbitrary operating system commands with elevated privileges. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Uncontrolled recursion in the SVG parser and renderer of the Qt SVG module (QtSvg) in Qt Group Qt allows attackers to cause a denial of service (application crash via stack exhaustion) via a crafted SVG file with deeply nested elements. |
| OW2 ASM 9.11 before 9.11.1 contains an infinite loop vulnerability in Label.resolve() caused by 16-bit forward-reference offsets truncating when rewritten methods exceed 64 KB. Attackers can supply crafted class files whose transformed code grows past 65535 bytes, hanging ClassReader.accept() and denying service to build tools, instrumenters, agents, or analyzers. |
| Picomatch through 4.0.7 contains a regular expression denial of service vulnerability that allows attackers to block the event loop by supplying single-branch repeated extglob patterns. Attackers can provide globs like +(*) or +(*a), which analyzeRepeatedExtglob in lib/parse.js skips, causing exponential backtracking against short crafted strings and denying service to Node.js applications. |
| markdown-it is a Markdown parser. Prior to 14.3.2 and 15.0.2, when typographer: true is enabled, specially crafted Markdown can cause quadratic processing time in the smartquotes rule, potentially leading to denial of service in applications processing untrusted input. Many opening double quotes followed by unmatched closing single quotes cause repeated scans of the entire opener stack. The same issue occurs with the quote types reversed. The default configuration (typographer: false) is not affected, but this option is enabled with high probability. This issue is fixed in versions 14.3.2 and 15.0.2. |
| follow-redirects is a Node.js HTTP and HTTPS client wrapper that automatically follows redirects. From 1.16.0 until 1.16.1, escapeRegex leaves valid header-name metacharacters unescaped in sensitiveHeaders. When an application declares a sensitive header whose name contains ^ or | and follows a cross-origin or HTTPS-to-HTTP redirect, unescaped regular-expression metacharacters prevent the generated filter from matching the declared header name, and the credential header is forwarded to an attacker-controlled redirect target. This issue is fixed in version 1.16.1. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Limit access to parser->buffer when trace_get_user failed
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tuner: xc5000: Fix use-after-free in xc5000_release
The original code uses cancel_delayed_work() in xc5000_release(), which
does not guarantee that the delayed work item timer_sleep has fully
completed if it was already running. This leads to use-after-free scenarios
where xc5000_release() may free the xc5000_priv while timer_sleep is still
active and attempts to dereference the xc5000_priv.
A typical race condition is illustrated below:
CPU 0 (release thread) | CPU 1 (delayed work callback)
xc5000_release() | xc5000_do_timer_sleep()
cancel_delayed_work() |
hybrid_tuner_release_state(priv) |
kfree(priv) |
| priv = container_of() // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the timer_sleep is properly canceled before the xc5000_priv memory
is deallocated.
A deadlock concern was considered: xc5000_release() is called in a process
context and is not holding any locks that the timer_sleep work item might
also need. Therefore, the use of the _sync() variant is safe here.
This bug was initially identified through static analysis.
[hverkuil: fix typo in Subject: tunner -> tuner] |
| In the Linux kernel, the following vulnerability has been resolved:
net/ip6_tunnel: Prevent perpetual tunnel growth
Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too.
While ipv4 tunnel headroom adjustment growth was limited in
commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"),
ipv6 tunnel yet increases the headroom without any ceiling.
Reflect ipv4 tunnel headroom adjustment limit on ipv6 version.
Credits to Francesco Ruggeri, who was originally debugging this issue
and wrote local Arista-specific patch and a reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fc: move lsop put work to nvmet_fc_ls_req_op
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Validate i_depth for exhash directories
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path
During tests of another unrelated patch I was able to trigger this
error: Objects remaining on __kmem_cache_shutdown() |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring. |
