| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: send: fix buffer overflow detection when copying path to cache entry
Starting with commit c0247d289e73 ("btrfs: send: annotate struct
name_cache_entry with __counted_by()") we annotated the variable length
array "name" from the name_cache_entry structure with __counted_by() to
improve overflow detection. However that alone was not correct, because
the length of that array does not match the "name_len" field - it matches
that plus 1 to include the NUL string terminator, so that makes a
fortified kernel think there's an overflow and report a splat like this:
strcpy: detected buffer overflow: 20 byte write of buffer size 19
WARNING: CPU: 3 PID: 3310 at __fortify_report+0x45/0x50
CPU: 3 UID: 0 PID: 3310 Comm: btrfs Not tainted 6.11.0-prnet #1
Hardware name: CompuLab Ltd. sbc-ihsw/Intense-PC2 (IPC2), BIOS IPC2_3.330.7 X64 03/15/2018
RIP: 0010:__fortify_report+0x45/0x50
Code: 48 8b 34 (...)
RSP: 0018:ffff97ebc0d6f650 EFLAGS: 00010246
RAX: 7749924ef60fa600 RBX: ffff8bf5446a521a RCX: 0000000000000027
RDX: 00000000ffffdfff RSI: ffff97ebc0d6f548 RDI: ffff8bf84e7a1cc8
RBP: ffff8bf548574080 R08: ffffffffa8c40e10 R09: 0000000000005ffd
R10: 0000000000000004 R11: ffffffffa8c70e10 R12: ffff8bf551eef400
R13: 0000000000000000 R14: 0000000000000013 R15: 00000000000003a8
FS: 00007fae144de8c0(0000) GS:ffff8bf84e780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fae14691690 CR3: 00000001027a2003 CR4: 00000000001706f0
Call Trace:
<TASK>
? __warn+0x12a/0x1d0
? __fortify_report+0x45/0x50
? report_bug+0x154/0x1c0
? handle_bug+0x42/0x70
? exc_invalid_op+0x1a/0x50
? asm_exc_invalid_op+0x1a/0x20
? __fortify_report+0x45/0x50
__fortify_panic+0x9/0x10
__get_cur_name_and_parent+0x3bc/0x3c0
get_cur_path+0x207/0x3b0
send_extent_data+0x709/0x10d0
? find_parent_nodes+0x22df/0x25d0
? mas_nomem+0x13/0x90
? mtree_insert_range+0xa5/0x110
? btrfs_lru_cache_store+0x5f/0x1e0
? iterate_extent_inodes+0x52d/0x5a0
process_extent+0xa96/0x11a0
? __pfx_lookup_backref_cache+0x10/0x10
? __pfx_store_backref_cache+0x10/0x10
? __pfx_iterate_backrefs+0x10/0x10
? __pfx_check_extent_item+0x10/0x10
changed_cb+0x6fa/0x930
? tree_advance+0x362/0x390
? memcmp_extent_buffer+0xd7/0x160
send_subvol+0xf0a/0x1520
btrfs_ioctl_send+0x106b/0x11d0
? __pfx___clone_root_cmp_sort+0x10/0x10
_btrfs_ioctl_send+0x1ac/0x240
btrfs_ioctl+0x75b/0x850
__se_sys_ioctl+0xca/0x150
do_syscall_64+0x85/0x160
? __count_memcg_events+0x69/0x100
? handle_mm_fault+0x1327/0x15c0
? __se_sys_rt_sigprocmask+0xf1/0x180
? syscall_exit_to_user_mode+0x75/0xa0
? do_syscall_64+0x91/0x160
? do_user_addr_fault+0x21d/0x630
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fae145eeb4f
Code: 00 48 89 (...)
RSP: 002b:00007ffdf1cb09b0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fae145eeb4f
RDX: 00007ffdf1cb0ad0 RSI: 0000000040489426 RDI: 0000000000000004
RBP: 00000000000078fe R08: 00007fae144006c0 R09: 00007ffdf1cb0927
R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffdf1cb1ce8
R13: 0000000000000003 R14: 000055c499fab2e0 R15: 0000000000000004
</TASK>
Fix this by not storing the NUL string terminator since we don't actually
need it for name cache entries, this way "name_len" corresponds to the
actual size of the "name" array. This requires marking the "name" array
field with __nonstring and using memcpy() instead of strcpy() as
recommended by the guidelines at:
https://github.com/KSPP/linux/issues/90 |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix off by one in get_rpi()
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Protect against overflow of ALIGN() during iova allocation
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274
iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Cap the automatic alignment to the huge page size, which is probably a
better idea overall. Huge automatic alignments can fragment and chew up
the available IOVA space without any reason. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: void array out of bound when loop tnl_num
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix firmware crash due to invalid peer nss
Currently, if the access point receives an association
request containing an Extended HE Capabilities Information
Element with an invalid MCS-NSS, it triggers a firmware
crash.
This issue arises when EHT-PHY capabilities shows support
for a bandwidth and MCS-NSS set for that particular
bandwidth is filled by zeros and due to this, driver obtains
peer_nss as 0 and sending this value to firmware causes
crash.
Address this issue by implementing a validation step for
the peer_nss value before passing it to the firmware. If
the value is greater than zero, proceed with forwarding
it to the firmware. However, if the value is invalid,
reject the association request to prevent potential
firmware crashes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Disable coherent dumb buffers without 3d
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
If z_erofs_gbuf_growsize() partially fails on a global buffer due to
memory allocation failure or fault injection (as reported by syzbot [1]),
new pages need to be freed by comparing to the existing pages to avoid
memory leaks.
However, the old gbuf->pages[] array may not be large enough, which can
lead to null-ptr-deref or out-of-bound access.
Fix this by checking against gbuf->nrpages in advance.
[1] https://lore.kernel.org/r/[email protected] |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined
create_elf_fdpic_tables() does not correctly account the space for the
AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the
commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc/<pid>/auxv") it
resulted in the last entry of the AUX vector being set to zero, but with
that change it results in a kernel BUG.
Fix that by adding one to the number of AUXV entries (nitems) when
ELF_HWCAP2 is defined. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/boot: Avoid possible physmem_info segment corruption
When physical memory for the kernel image is allocated it does not
consider extra memory required for offsetting the image start to
match it with the lower 20 bits of KASLR virtual base address. That
might lead to kernel access beyond its memory range. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/firmware: use dma non-coherent allocator
Currently, enabling SG_DEBUG in the kernel will cause nouveau to hit a
BUG() on startup, when the iommu is enabled:
kernel BUG at include/linux/scatterlist.h:187!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 930 Comm: (udev-worker) Not tainted 6.9.0-rc3Lyude-Test+ #30
Hardware name: MSI MS-7A39/A320M GAMING PRO (MS-7A39), BIOS 1.I0 01/22/2019
RIP: 0010:sg_init_one+0x85/0xa0
Code: 69 88 32 01 83 e1 03 f6 c3 03 75 20 a8 01 75 1e 48 09 cb 41 89 54
24 08 49 89 1c 24 41 89 6c 24 0c 5b 5d 41 5c e9 7b b9 88 00 <0f> 0b 0f 0b
0f 0b 48 8b 05 5e 46 9a 01 eb b2 66 66 2e 0f 1f 84 00
RSP: 0018:ffffa776017bf6a0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa77600d87000 RCX: 000000000000002b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffa77680d87000
RBP: 000000000000e000 R08: 0000000000000000 R09: 0000000000000000
R10: ffff98f4c46aa508 R11: 0000000000000000 R12: ffff98f4c46aa508
R13: ffff98f4c46aa008 R14: ffffa77600d4a000 R15: ffffa77600d4a018
FS: 00007feeb5aae980(0000) GS:ffff98f5c4dc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f22cb9a4520 CR3: 00000001043ba000 CR4: 00000000003506f0
Call Trace:
<TASK>
? die+0x36/0x90
? do_trap+0xdd/0x100
? sg_init_one+0x85/0xa0
? do_error_trap+0x65/0x80
? sg_init_one+0x85/0xa0
? exc_invalid_op+0x50/0x70
? sg_init_one+0x85/0xa0
? asm_exc_invalid_op+0x1a/0x20
? sg_init_one+0x85/0xa0
nvkm_firmware_ctor+0x14a/0x250 [nouveau]
nvkm_falcon_fw_ctor+0x42/0x70 [nouveau]
ga102_gsp_booter_ctor+0xb4/0x1a0 [nouveau]
r535_gsp_oneinit+0xb3/0x15f0 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? nvkm_udevice_new+0x95/0x140 [nouveau]
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? ktime_get+0x47/0xb0
Fix this by using the non-coherent allocator instead, I think there
might be a better answer to this, but it involve ripping up some of
APIs using sg lists. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()`
When enabling UBSAN on Raspberry Pi 5, we get the following warning:
[ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3
[ 387.903868] index 7 is out of range for type '__u32 [7]'
[ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151
[ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched]
[ 387.932525] Call trace:
[ 387.935296] dump_backtrace+0x170/0x1b8
[ 387.939403] show_stack+0x20/0x38
[ 387.942907] dump_stack_lvl+0x90/0xd0
[ 387.946785] dump_stack+0x18/0x28
[ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0
[ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d]
[ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ 387.966862] process_one_work+0x62c/0xb48
[ 387.971296] worker_thread+0x468/0x5b0
[ 387.975317] kthread+0x1c4/0x1e0
[ 387.978818] ret_from_fork+0x10/0x20
[ 387.983014] ---[ end trace ]---
This happens because the UAPI provides only seven configuration
registers and we are reading the eighth position of this u32 array.
Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by
accessing only seven positions on the '__u32 [7]' array. The eighth
register exists indeed on V3D 7.1, but it isn't currently used. That
being so, let's guarantee that it remains unused and add a note that it
could be set in a future patch. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
UBSAN reports the following 'subtraction overflow' error when booting
in a virtual machine on Android:
| Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4
| Hardware name: linux,dummy-virt (DT)
| pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cancel_delayed_work+0x34/0x44
| lr : cancel_delayed_work+0x2c/0x44
| sp : ffff80008002ba60
| x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0
| x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058
| x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d
| x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000
| x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000
| x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553
| x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620
| x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000
| Call trace:
| cancel_delayed_work+0x34/0x44
| deferred_probe_extend_timeout+0x20/0x70
| driver_register+0xa8/0x110
| __platform_driver_register+0x28/0x3c
| syscon_init+0x24/0x38
| do_one_initcall+0xe4/0x338
| do_initcall_level+0xac/0x178
| do_initcalls+0x5c/0xa0
| do_basic_setup+0x20/0x30
| kernel_init_freeable+0x8c/0xf8
| kernel_init+0x28/0x1b4
| ret_from_fork+0x10/0x20
| Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception
This is due to shift_and_mask() using a signed immediate to construct
the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so
that it ends up decrementing from INT_MIN.
Use an unsigned constant '1U' to generate the mask in shift_and_mask(). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt5033: Bring back i2c_set_clientdata
Commit 3a93da231c12 ("power: supply: rt5033: Use devm_power_supply_register() helper")
reworked the driver to use devm. While at it, the i2c_set_clientdata
was dropped along with the remove callback. Unfortunately other parts
of the driver also rely on i2c clientdata so this causes kernel oops.
Bring the call back to fix the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc2991) re-order conditions to fix off by one bug
LTC2991_T_INT_CH_NR is 4. The st->temp_en[] array has LTC2991_MAX_CHANNEL
(4) elements. Thus if "channel" is equal to LTC2991_T_INT_CH_NR then we
have read one element beyond the end of the array. Flip the conditions
around so that we check if "channel" is valid before using it as an array
index. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix out-of-bounds issue when preparing trampoline image
We get the size of the trampoline image during the dry run phase and
allocate memory based on that size. The allocated image will then be
populated with instructions during the real patch phase. But after
commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im`
argument is inconsistent in the dry run and real patch phase. This may
cause emit_imm in RV64 to generate a different number of instructions
when generating the 'im' address, potentially causing out-of-bounds
issues. Let's emit the maximum number of instructions for the "im"
address during dry run to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists()
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Assign ->num before accessing ->hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: PAC1934: fix accessing out of bounds array index
Fix accessing out of bounds array index for average
current and voltage measurements. The device itself has
only 4 channels, but in sysfs there are "fake"
channels for the average voltages and currents too. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate slices count returned by FW
The function adf_send_admin_tl_start() enables the telemetry (TL)
feature on a QAT device by sending the ICP_QAT_FW_TL_START message to
the firmware. This triggers the FW to start writing TL data to a DMA
buffer in memory and returns an array containing the number of
accelerators of each type (slices) supported by this HW.
The pointer to this array is stored in the adf_tl_hw_data data
structure called slice_cnt.
The array slice_cnt is then used in the function tl_print_dev_data()
to report in debugfs only statistics about the supported accelerators.
An incorrect value of the elements in slice_cnt might lead to an out
of bounds memory read.
At the moment, there isn't an implementation of FW that returns a wrong
value, but for robustness validate the slice count array returned by FW. |
