| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
In do_action()'s UpdateResidentValue case (fslog.c:3307),
lrh->attr_off and lrh->redo_len come from the on-disk LRH.
When they satisfy aoff + dlen < attr->res.data_off, the
assignment
attr->res.data_size = cpu_to_le32(aoff + dlen - data_off);
underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1,
data_off=0x18). Subsequent code that reads attr->res.data_size
to walk the resident attribute payload would then read up to
4 GiB past the 1024-byte MFT record allocation.
The existing mi_enum_attr() defense in fs/ntfs3/record.c:287
catches the corrupted data_size on the next attribute walk
and fails the mount, but only on the path that walks all
attributes. A read site that picks an attribute by name and
reads its data_size without re-validating is not covered.
Validate aoff against data_off and asize at the source.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe: with aoff=0x10 and data_off=0x18, the
post-assignment data_size is 0xfffffff9 (mount then fails
at -22 from mi_enum_attr).
[[email protected]: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: avoid OOB read of num_dests header
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: handle inline data with a nonzero offset
nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset
into the per-command inline scatterlist. The bounds check admits any
offset with off + len <= inline_data_size, but the mapping still assumes
the data begins in the first inline page:
sg->offset = off;
sg->length = min_t(int, len, PAGE_SIZE - off);
When a port is configured with inline_data_size > PAGE_SIZE (settable up
to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size]
makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and
the block backend reads far past the first inline page. num_pages(len)
also ignores the offset, so an in-bounds offset whose [off, off+len)
span crosses a page boundary under-counts the scatterlist.
Map the offset properly: split it into a page index and an in-page
offset, start the scatterlist at that page, and size the page count from
page_off + len. Because the request scatterlist may now start at
inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL
identity test in nvmet_rdma_release_rsp() to a range test; otherwise the
persistent inline scatterlist is mistaken for an allocated one and
nvmet_req_free_sgls() frees an inline page (and warns in
free_large_kmalloc()). |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: keep the readdir entry size 64-bit in fill_from_part()
fill_from_part() computes the size of a directory entry in size_t but
stores it in a __u32. An entry length near U32_MAX wraps it to a small
value, bypasses the bounds check, and is then used to index the entry,
reading far past the directory part -- an out-of-bounds read that oopses
the kernel.
Compute the size as a u64 so it cannot truncate; the bounds check then
rejects the entry. The trailer is supplied by the userspace client. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: Validate length before parsing diagnostics TLV
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access. |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix OOB read during CQ MR registration
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: uleds: Fix potential buffer overread
The name string supplied by userspace is not guaranteed to be
null-terminated, so using strchr() on it might result in a buffer
overread. The same thing will happen when said string is used by
the LED class device.
Fix this by using strnchr() instead and explicitly check that
the name string is properly null-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject non-inline dinodes with i_size and zero i_clusters
On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a
non-inline regular file with non-zero i_size and zero i_clusters is
structurally malformed: the extent map declares no allocated clusters yet
the size header claims content exists. Keep rejecting that shape, but
express it through a shared predicate so the same invariant is available
to normal inode reads and online filecheck.
The same zero-cluster shape is also malformed for non-inline directories.
ocfs2 directory growth allocates backing storage before advancing i_size,
and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches
i_size_read(inode). A forged directory dinode with a huge i_size and no
clusters would repeatedly fail on holes while advancing through the
claimed size.
Sparse regular files remain exempt: on sparse-alloc volumes, truncate can
legitimately grow i_size without allocating clusters. System inodes and
inline-data dinodes also retain their separate storage rules.
Mirror the check in ocfs2_filecheck_validate_inode_block() as well.
filecheck reports through its own error namespace, so malformed
size/cluster state is logged as a filecheck invalid-inode result rather
than via ocfs2_error(), but it must not proceed into
ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| Public-Only Personal access tokens scope bypass in Organization and Permission Endpoints |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. |
| Integer underflow (wrap or wraparound) in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
