| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix rmmio iounmap skipped on device removal
amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so
drm_dev_enter() is already false there and the iounmap() guarded by it
is skipped. This .remove path runs on both hot-unplug and plain rmmod,
so the register BAR ioremap mapping leaks one instance per unload.
Unmap rmmio unconditionally (guard only on non-NULL) and drop the now
unused idx.
(cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Skip KFD mapping clear before initialization
amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev
has a fully populated node array. This is not true when KFD device
initialization fails after probe.
For example, kgd2kfd_device_init() sets num_nodes before checking
PCIe atomics support. On Polaris systems without the required atomics,
it returns before allocating nodes[0], but the kfd_dev remains attached
to the amdgpu device. A later GPU reset then dereferences nodes[0]->id.
Require the authoritative KFD initialization flag before walking the
node array, matching the existing KFD reset and teardown paths.
(cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow in EOP ring size calculation.
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
order_base_2(q->eop_ring_buffer_size / 4) - 1
But order_base_2 can in theory return 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
order_base_2(q->eop_ring_buffer_size / 8)
using properties of logarithms.
Also add to the above comment to make the mathematics more clear.
(cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1
But ffs can in theory return 1 or 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4)
using properties of logarithms.
(cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: cancel reconnect work in clean_demultiplex_info()
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
reparse_data_buffer structure before accessing its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix server->total_read for compound encrypted PDUs
In receive_encrypted_standard(), server->total_read is left at the
full decrypted frame size when walking sub-PDUs of a compound encrypted
frame. As a result, cifs_handle_standard() passes this full size
to smb2_check_message(), causing the PDU length guards to incorrectly
validate the entire compound frame instead of the current sub-PDU.
This allows truncated non-last sub-PDUs to bypass length validation,
leading to out-of-bounds reads in smb2_get_data_area_len().
Fix this by setting server->total_read to the true length of the
current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining
pdu_length for the last one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: restrict BAR0 fallback read to SR-IOV VFs only
The BAR0 fallback read path was introduced as a workaround for SR-IOV VFs
where the VRAM aperture is not available during early init. Restrict this
workaround to only SR-IOV VFs where it's needed.
(cherry picked from commit d8a0affd207c813bd063fa2c27786f449eaf92b8) |
| Insertion of Sensitive Information Into Sent Data vulnerability in StylemixThemes Motors allows Retrieve Embedded Sensitive Data.
This issue affects Motors: from n/a through 1.4.124. |
| Use of Password Hash With Insufficient Computational Effort vulnerability in danielberkompas cloak_ecto and danielberkompas cloak allows an attacker who holds the hashed values and the configured secret to brute-force low-entropy plaintexts much faster than configured.
The dump/1 callback that Cloak.Ecto.PBKDF2 (Cloak.Fields.PBKDF2 in cloak before the Ecto code moved to cloak_ecto) injects into a field module calls :pbkdf2.pbkdf2/4 with config[:size] in the iteration-count position. The :iterations setting is validated but never used. With the cloak_ecto defaults (iterations: 600_000, size: 32) each hash runs 32 PBKDF2 rounds instead of 600,000, so offline guessing of values such as email addresses costs about 18,750 times less than configured.
This issue affects cloak_ecto: from 1.0.0-alpha.0 onward; cloak: from 0.7.0 before 1.0.0-alpha.0. |
| Reliance on Obfuscation or Encryption of Security-Relevant Inputs without Integrity Checking vulnerability in danielberkompas cloak allows an attacker with write access to stored ciphertext to make it decrypt to a chosen value via bit flipping.
Cloak.Ciphers.AES.CTR encrypts with AES-256 in CTR mode and stores the key tag, the IV and the ciphertext with no MAC. decrypt/2 checks only the key tag and the minimum length before it returns the plaintext, and Cloak.Ciphers.Deprecated.AES.CTR decrypts the legacy format the same way. CTR is a stream cipher, so a value XORed into the stored ciphertext is XORed into the plaintext at the same offset. An attacker who can write to the encrypted store (for example through SQL injection or a compromised replica) and who knows or can guess a stored plaintext can replace it with any value of the same length. The application receives that value with no error.
This issue affects cloak: from 0.1.0-pre onward. |
| Uncontrolled Resource Consumption vulnerability in the Elixir standard library's Version module allows an attacker who controls a version string to cause a denial of service through CPU and memory exhaustion.
The version parser converts numeric version components (major, minor, patch and numeric pre-release/build identifiers) to integers without bounding their length. A single large all-digit component therefore forces a super-linear, non-yielding base-10 to arbitrary-precision integer conversion (String.to_integer/1, i.e. :erlang.binary_to_integer/1) that pins a BEAM scheduler, and a larger component raises an uncaught SystemLimitError that crashes the calling process. A single moderately sized string (around one megabyte) is enough; no authentication is required.
This is reachable from the public entry points Version.parse/1, Version.parse!/1, Version.match?/3, Version.compare/2, and Version.parse_requirement/1, which applications routinely call on untrusted input such as HTTP parameters, dependency-manifest fields, and package metadata.
This vulnerability is associated with program files lib/version.ex and program routines 'Elixir.Version.Parser':parse_digits/2.
This issue affects elixir: from 0.9.3 before 1.20.1. |
| Subscriber SQL Injection in Paid Member Subscriptions <= 3.1.1 versions. |
