| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close race between scheduler and state change
The mptcp scheduler may race with subflow sockets state change: data
transmission on the selected socket may fail and a later release could
try to use mss_now reset to 0 for a divide operation.
Address the issue by explicitly checking for the critical scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response()
If tb_cfg_request() fails setting up the request (for example the
control channel is shut down already) it returns an error without
calling the callback. To avoid leaking that memory, call
tb_cfg_request_put() if tb_cfg_request() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Set tb->root_switch to NULL when domain is stopped
Similarly what we do with the firmware connection manager. This makes
tb_xdp_handle_request() return error to the remote host. However, we
need to make sure we keep the uuid alive so that we can reply until the
whole domain is released. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dm1105: fix missing error check for dma_alloc_coherent
The return value of dm1105_dma_map(), which handles DMA memory allocation,
is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver
will proceed using a NULL pointer for DMA transfers, leading to a kernel
oops or invalid hardware access.
Fix this by checking the return value and propagating -ENOMEM on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ixp4xx - fix buffer chain unwind on allocation failure
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: avoid NULL deref of host->data in IRQ handler
mmc_davinci_irq() returns early only when both host->cmd and
host->data are NULL:
if (host->cmd == NULL && host->data == NULL) {
...
return IRQ_NONE;
}
So we may legitimately reach the rest of the handler with
host->data == NULL (and therefore data == NULL). The DATDNE branch
already guards against this with an explicit "if (data != NULL)"
check, but the subsequent TOUTRD ("read data timeout") and
CRCWR/CRCRD ("data CRC error") branches dereference data
unconditionally:
if (qstatus & MMCST0_TOUTRD) {
data->error = -ETIMEDOUT; <-- NULL deref
...
davinci_abort_data(host, data);
}
if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
data->error = -EILSEQ; <-- NULL deref
...
}
If either bit is set in qstatus while host->data is NULL, the kernel
will crash inside the IRQ handler. smatch flags this:
drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we
previously assumed 'data' could be null (see line 914)
Gate both branches on a non-NULL data, matching the existing pattern
used by the DATDNE branch.
No functional change for callers where data is non-NULL, which is
the only case in which these branches did meaningful work before
this change. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
affs: handle set_blocksize failures
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
bfs: handle set_blocksize failures
bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
