| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states. |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Firepower Threat Defense (FTD) Software when running on the Cisco Firepower 1000 Series platform could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a communication error between internal functions. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause a buffer underrun, which leads to a crash. The crash causes the affected device to reload. |
| A vulnerability in the Transport Layer Security version 1.3 (TLS 1.3) policy with URL category functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured TLS 1.3 policy to block traffic for a specific URL. The vulnerability is due to a logic error with Snort handling of the connection with the TLS 1.3 policy and URL category configuration. An attacker could exploit this vulnerability by sending crafted TLS 1.3 connections to an affected device. A successful exploit could allow the attacker to bypass the TLS 1.3 policy and access URLs that are outside the affected device and normally would be dropped. |
| Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device. |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the detection engine that handles Secure Sockets Layer (SSL) packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition because the Snort process unexpectedly restarts. This vulnerability affects Cisco Firepower System Software prior to the first fixed release when it is configured with an SSL Decrypt-Resign policy. More Information: CSCvb62292. Known Affected Releases: 6.0.1 6.1.0 6.2.0. Known Fixed Releases: 6.2.0 6.1.0.2. |
| A vulnerability in the SSL/TLS inspection of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation for certain fields of specific SSL/TLS messages. An attacker could exploit this vulnerability by sending a malformed SSL/TLS message through an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. No manual intervention is needed to recover the device after it has reloaded. |
| Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects. |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files. |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user.
This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following:
Identify valid credentials that could then be used to establish an unauthorized remote access VPN session.
Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier).
Notes:
Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured.
This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured.
Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured File Policy for HTTP. The vulnerability is due to incorrect detection of modified HTTP packets used in chunked responses. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured File Policy for HTTP packets and deliver a malicious payload. |
| Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet. |
| A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted. |
| Multiple vulnerabilities in the Server Message Block Version 2 (SMB2) processor of the Snort detection engine on multiple Cisco products could allow an unauthenticated, remote attacker to bypass the configured policies or cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to improper management of system resources when the Snort detection engine is processing SMB2 traffic. An attacker could exploit these vulnerabilities by sending a high rate of certain types of SMB2 packets through an affected device. A successful exploit could allow the attacker to trigger a reload of the Snort process, resulting in a DoS condition.
Note: When the snort preserve-connection option is enabled for the Snort detection engine, a successful exploit could also allow the attacker to bypass the configured policies and deliver a malicious payload to the protected network. The snort preserve-connection setting is enabled by default. See the Details ["#details"] section of this advisory for more information.
Note: Only products that have Snort 3 configured are affected. Products that are configured with Snort 2 are not affected. |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass file policies that are configured to block files transmitted to an affected device via the BitTorrent protocol. The vulnerability exists because the affected software does not detect BitTorrent handshake messages correctly. An attacker could exploit this vulnerability by sending a crafted BitTorrent connection request to an affected device. A successful exploit could allow the attacker to bypass file policies that are configured to block files transmitted to the affected device via the BitTorrent protocol. Cisco Bug IDs: CSCve26946. |
| A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile. |