| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| A stack-based buffer overflow vulnerability in the password functionality could allow an unauthenticated attacker to achieve code execution when the SafeEnhancement feature is enabled. |
| A command injection vulnerability in the firmware upgrade file verification process could allow an attacker to execute arbitrary commands. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). From 0.29.3 until 0.29.13, the incomplete fix for CVE-2026-45628 leaves packages/server/src/db/schema/compose.ts branch fields without server-side validation, allowing a direct compose.update request to store a malicious customGitBranch, branch, gitlabBranch, bitbucketBranch, or giteaBranch. A low-privileged authenticated user can trigger compose.deploy, which passes the stored branch to shell-based Git clone commands in packages/server/src/utils/providers/git.ts, github.ts, gitlab.ts, bitbucket.ts, and gitea.ts, resulting in arbitrary host command execution. This issue is fixed in version 0.29.13. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add bounds checks for firmware log indices
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sit: reload inner IPv6 header after GSO offloads
ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function
entry and continues using it after iptunnel_handle_offloads().
For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone().
When the skb header is cloned, skb_header_unclone() can call
pskb_expand_head(), which may move the skb head. The pskb_expand_head()
contract requires pointers into the skb header to be reloaded after the
call.
If the later skb_realloc_headroom() branch is not taken, SIT uses the
stale iph6 pointer to read the inner hop limit and DS field. That can
read from a freed skb head after the old head's remaining clone is
released.
Reload iph6 after the offload helper succeeds and before subsequent
reads from the inner IPv6 header. Keep the existing reload after
skb_realloc_headroom(), since that branch can also replace the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Use krealloc_array() in dal_vector_reserve()
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| XSA-501 was about issues with v1 -> v2 and v2 -> v1 changes racing certain
other grant table operations. Sadly a v2 -> v1 -> v2 change has yet
another effect which wasn't accounted for: During the first change, status
pages would be freed. During the second change they would be allocated
again. Hence across the full pair of change the addresses of the status
pages may change, rendering stale previously calculated pointers into the
status array. |
| For XSA-308 logic was introduced, as VMX VMEntry checks do not like the
exact combination of state which occurs when #DB in intercepted, Single
Stepping is active, and blocked by STI/MovSS is active, despite this being
a legitimate state to be in. The resulting VMEntry failure is fatal to
the guest.
Sadly there is another special sub-case of the above, with branch tracing
enabled. In that case the prior adjustment would still cause a VMentry
failure, as before fatal to the guest. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
1) XSA-437 (CVE-2023-34321) addressed issues with overflows in
calculations involved in guests flushing caches through
GNTTABOP_cache_flush. Unfortunately the fix there introduced a
calculation which may underflow, resulting in a loop which would - at
least on 64-bit Arm - take excessively long, and which would likely
eventually crash the hypervisor.
This is CVE-2026-102699.
2) GNTTABOP_cache_flush may be issued on memory mapped from another
domain using the grant table interface. However there was no
restriction to disallow the use of invalidate-without-clean against
read-only grant mappings, which may corrupt the granted memory.
This is CVE-2026-102702. |
| By sending a specially crafted HTTP GET request to a listening Rapid7 Metasploit HTTP handler, an attacker can register an arbitrary regular expression. When evaluated, this malicious handler can either prevent new HTTP handler sessions from being established, or cause a resource exhaustion on the Metasploit server. |
| A stack-based buffer overflow vulnerability in the log message functionality could allow an unauthenticated attacker to achieve code execution. |
| A stack-based buffer overflow vulnerability in the Cookie parsing methods could allow an unauthenticated attacker to achieve code execution when the SafeEnhancement feature is enabled. |
| A stack-based buffer overflow vulnerability in the upload functionality could allow an authenticated attacker to achieve code execution. |
| The TrueBooker – Appointment Booking and Scheduler System plugin for WordPress is vulnerable to Authorization Bypass Through User-Controlled Key leading to Account Takeover in all versions up to, and including, 1.2.6. This is due to the admin_user_create_cus AJAX handler lacking any authentication or capability check before passing the attacker-supplied truebooker_wp_user_id parameter directly to wp_update_user. This makes it possible for unauthenticated attackers to overwrite the email address of any WordPress user — including an administrator — and then complete the standard WordPress lost-password flow to fully take over the targeted account. |
| libpcap BPF interpreter treats the offset in the 'ja L' BPF instruction as a signed integer to implement looping via backward jumps, but it does not limit the number of loop iterations. A crafted filter program or the 'protochain' primitive used on a crafted network packet can cause the interpreter to loop infinitely. |
