| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in Tenda JD12L 16.03.53.23. The impacted element is the function formWifiBasicSet of the file /goform/WifiBasicSet. Executing a manipulation of the argument security_5g can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. |
| A vulnerability was found in Tenda JD12L 16.03.53.23. This impacts the function fromNatStaticSetting of the file /goform/NatStaticSetting. The manipulation of the argument page results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in MCC handlers
The RFCOMM MCC handlers cast skb->data to protocol-specific structs
without validating skb->len first. A malicious remote device can send
truncated MCC frames and trigger out-of-bounds reads in these handlers.
Fix this by using skb_pull_data() to validate and access the required
data before dereferencing it.
rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows
1-byte RPN requests. Handle this by validating only the DLCI byte first,
and validating the full struct only when len > 1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free reuseport cBPF prog after RCU grace period.
Eulgyu Kim reported the splat below with a repro. [0]
The repro sets up a UDP reuseport group with a cBPF prog and
replaces it with a new one while another thread is sending
a UDP packet to the group.
The reuseport prog is freed by sk_reuseport_prog_free().
bpf_prog_put() is called for "e"BPF prog to destruct through
multiple stages while cBPF prog is freed immediately by
bpf_release_orig_filter() and bpf_prog_free().
If a reuseport prog is detached from the setsockopt() path
(reuseport_attach_prog() or reuseport_detach_prog()),
sk_reuseport_prog_free() is called without waiting for RCU
readers to complete, resulting in various bugs.
Let's defer freeing the reuseport cBPF prog after one RCU
grace period.
Note "e"BPF prog is safe as is unless the fast path starts
to touch fields destroyed in bpf_prog_put_deferred() and
__bpf_prog_put_noref().
[0]:
BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
Read of size 4 at addr ffffc9000051e004 by task slowme/10208
CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495
__udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723
__udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752
__udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6181 [inline]
__netif_receive_skb net/core/dev.c:6294 [inline]
process_backlog+0xaa4/0x1960 net/core/dev.c:6645
__napi_poll+0xae/0x340 net/core/dev.c:7709
napi_poll net/core/dev.c:7772 [inline]
net_rx_action+0x5d7/0xf50 net/core/dev.c:7929
handle_softirqs+0x22b/0x870 kernel/softirq.c:622
do_softirq+0x76/0xd0 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip_output+0x29f/0x450 net/ipv4/ip_output.c:438
ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508
udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195
udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
__sys_sendto+0x554/0x680 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x415a2d
Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d
RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003
RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010
R10: 0000000000000000 R11:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack_irc: fix possible out-of-bounds read
When parsing fails after we've matched the command string we
should bail out instead of trying to match a different command.
This helper should be deprecated, given prevalence of TLS I doubt it has
any relevance in 2026. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max. |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Validate XDomain request packet size before type cast
tb_xdp_handle_request() casts the received packet buffer to
protocol-specific structs without verifying that the allocation
is large enough for the target type. A peer can send a minimal
XDomain packet that passes the generic header length check but is
shorter than the struct accessed after the cast, causing out-of-
bounds reads from the kmemdup allocation.
Plumb the packet length through xdomain_request_work and validate
it against the expected struct size before each cast. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: require Ethernet MAC header before using eth_hdr()
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix OOB in pcpu_init_value
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables
Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could
cause out-of-bounds access during target timeout lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: validate qr_numregions in dlm_match_regions()
Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.
- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.
This patch (of 2):
The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.
Add a bounds check for qr_numregions before entering the loops. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix out-of-bounds read on option matching
In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once
and passed by reference to nf_osf_match_one() for each fingerprint
checked. During TCP option parsing, nf_osf_match_one() advances the
shared ctx->optp pointer.
If a fingerprint perfectly matches, the function returns early without
restoring ctx->optp to its initial state. If the user has configured
NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint.
However, because ctx->optp was not restored, the next call to
nf_osf_match_one() starts parsing from the end of the options buffer.
This causes subsequent matches to read garbage data and fail
immediately, making it impossible to log more than one match or logging
incorrect matches.
Instead of using a shared ctx->optp pointer, pass the context as a
constant pointer and use a local pointer (optp) for TCP option
traversal. This makes nf_osf_match_one() strictly stateless from the
caller's perspective, ensuring every fingerprint check starts at the
correct option offset. |
