| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mockup: fix NULL pointer dereference when removing debugfs
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix null pointer dereference in efx_hard_start_xmit
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] |
| In the Linux kernel, the following vulnerability has been resolved:
sfc/siena: fix null pointer dereference in efx_hard_start_xmit
Like in previous patch for sfc, prevent potential (but unlikely) NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix possible NULL pointer dereference in send_acknowledge()
Handle memory allocation failure from nci_skb_alloc() (calling
alloc_skb()) to avoid possible NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of cached open files in nfsd4_open codepath
Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a
regular NFSv4 file") added the ability to cache an open fd over a
compound. There are a couple of problems with the way this currently
works:
It's racy, as a newly-created nfsd_file can end up with its PENDING bit
cleared while the nf is hashed, and the nf_file pointer is still zeroed
out. Other tasks can find it in this state and they expect to see a
valid nf_file, and can oops if nf_file is NULL.
Also, there is no guarantee that we'll end up creating a new nfsd_file
if one is already in the hash. If an extant entry is in the hash with a
valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with
the value of op_file and the old nf_file will leak.
Fix both issues by making a new nfsd_file_acquirei_opened variant that
takes an optional file pointer. If one is present when this is called,
we'll take a new reference to it instead of trying to open the file. If
the nfsd_file already has a valid nf_file, we'll just ignore the
optional file and pass the nfsd_file back as-is.
Also rework the tracepoints a bit to allow for an "opened" variant and
don't try to avoid counting acquisitions in the case where we already
have a cached open file. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
The subs function argument may be NULL, so do not use it before the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Check endpoint is valid before dereferencing it
When the host controller is not responding, all URBs queued to all
endpoints need to be killed. This can cause a kernel panic if we
dereference an invalid endpoint.
Fix this by using xhci_get_virt_ep() helper to find the endpoint and
checking if the endpoint is valid before dereferencing it.
[233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead
[233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8
[233311.853964] pc : xhci_hc_died+0x10c/0x270
[233311.853971] lr : xhci_hc_died+0x1ac/0x270
[233311.854077] Call trace:
[233311.854085] xhci_hc_died+0x10c/0x270
[233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4
[233311.854105] call_timer_fn+0x50/0x2d4
[233311.854112] expire_timers+0xac/0x2e4
[233311.854118] run_timer_softirq+0x300/0xabc
[233311.854127] __do_softirq+0x148/0x528
[233311.854135] irq_exit+0x194/0x1a8
[233311.854143] __handle_domain_irq+0x164/0x1d0
[233311.854149] gic_handle_irq.22273+0x10c/0x188
[233311.854156] el1_irq+0xfc/0x1a8
[233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm]
[233311.854185] cpuidle_enter_state+0x1f0/0x764
[233311.854194] do_idle+0x594/0x6ac
[233311.854201] cpu_startup_entry+0x7c/0x80
[233311.854209] secondary_start_kernel+0x170/0x198 |
| In the Linux kernel, the following vulnerability has been resolved:
gsmi: fix null-deref in gsmi_get_variable
We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.
commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix possible null pointer dereference
abo->tbo.resource may be NULL in amdgpu_vm_bo_update. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Have trace_event_file have ref counters
The following can crash the kernel:
# cd /sys/kernel/tracing
# echo 'p:sched schedule' > kprobe_events
# exec 5>>events/kprobes/sched/enable
# > kprobe_events
# exec 5>&-
The above commands:
1. Change directory to the tracefs directory
2. Create a kprobe event (doesn't matter what one)
3. Open bash file descriptor 5 on the enable file of the kprobe event
4. Delete the kprobe event (removes the files too)
5. Close the bash file descriptor 5
The above causes a crash!
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:tracing_release_file_tr+0xc/0x50
What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.
But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.
To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.
[91222.095236][ T319] typec port0: failed to register partner (-17)
...
[91225.061491][ T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][ T319] Call trace:
[91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc
[91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][ T319] kthread_worker_fn+0x178/0x58c
[91225.355902][ T319] kthread+0x150/0x200
[91225.355905][ T319] ret_from_fork+0x10/0x30
Add a check for port->partner to avoid dereferencing a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore/platform: Add check for kstrdup
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
Add the check for the return value of mtk_alloc_clk_data() in order to
avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (axi-fan-control) Fix possible NULL pointer dereference
axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix null pointer dereference in error message
This patch fixes a null pointer dereference in the error message that is
printed when the Display Core (DC) fails to initialize. The original
message includes the DC version number, which is undefined if the DC is
not initialized. |
