| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
.... |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: handle ctx allocation failure
Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures".
DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their
damon_ctx object allocations fail. The bugs are expected to happen
infrequently because the allocations are arguably too small to fail on
common setups. But theoretically they are possible and the consequences
are bad. Fix those.
The issues were discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init
function. damon_reclaim_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init
Regmap initialization triggers regcache_maple_populate() which attempts
SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to
be set, without them, NULL pointer dereference occurs during probe.
Move initialization before mcp23s08_spi_regmap_init() call. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues()
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: handle ctx allocation failure
DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init
function. damon_lru_sort_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL. |
| JavaScript::Minifier::XS versions before 0.16 for Perl crash with a NULL pointer dereference when the first meaningful token of the input is a slash.
The regexp versus division disambiguator in JsTokenizeString (XS.xs) inspects the previous token's last byte to choose between a regexp literal and a division operator. When a slash is the first meaningful token, with the start of input or only whitespace and comments before it, there is no valid preceding token: the walk back over whitespace and comment nodes runs off the head of the node list to NULL, and the byte lookup reads through a NULL contents pointer at an underflowed length index. The following identifier check dereferences the same NULL pointer.
The crash is reachable through the public minify() API, so input as small as a single slash byte crashes the calling process. A service that minifies untrusted or third-party JavaScript can be crashed by a remote request, causing denial of service. |
| Woodpecker before 3.15.0 registers the /api/orgs/lookup/*org_full_name endpoint without authentication middleware, and the LookupOrg handler unconditionally dereferences the session user (user.ForgeID, via ForgeFromUser) when selecting the forge to query. For an unauthenticated request session.User returns nil, so any unauthenticated HTTP request triggers a NULL pointer dereference in the handler. The panic is recovered by gin recovery middleware and the server continues serving (returning HTTP 500), but each request writes a multi-line panic stack trace to the error log. A low-bandwidth unauthenticated attacker can repeatedly probe the endpoint to flood the logs (about 37 lines per request), inflating disk usage and downstream log-ingestion cost and burying legitimate log events. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix a potential NPD in cleanup_prefix_route()
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430df ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ps883x: Fix Oops at unbind
When trying to unbind a device in order to bind to it vfio-platform as:
echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind
I get the following Oops:
[ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 436.487762] Mem abort info:
[ 436.490716] ESR = 0x0000000096000004
[ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits
[ 436.500071] SET = 0, FnV = 0
[ 436.503250] EA = 0, S1PTW = 0
[ 436.506505] FSC = 0x04: level 0 translation fault
[ 436.511533] Data abort info:
[ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000
[ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000
[ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP
[ 436.550374] Modules linked in:
[ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT
[ 436.564440] Tainted: [W]=WARN
[ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025
[ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 436.581841] pc : ps883x_retimer_remove+0x14/0x94
[ 436.586605] lr : i2c_device_remove+0x28/0x84
[ 436.591017] sp : ffff8000847137c0
That's because the ps883x_retimer_remove() retrieves the driver data
from i2c_get_clientdata() which was never set at probe. So, add
i2c_set_clientdata() at the end of the probe. |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following versions:
QTS 5.2.9.3492 build 20260507 and later
QuTS hero h5.2.9.3499 build 20260514 and later
QuTS hero h5.3.4.3500 build 20260520 and later
QuTS hero h6.0.0.3459 build 20260409 and later |
| An unauthenticated
NULL pointer dereference vulnerability exists in IEEE8021x_upload.cgi in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
improper validation of multipart upload headers when processing
certificate-related upload fields. A remote attacker may exploit this
vulnerability by sending a malformed multipart request, causing the affected
CGI process to crash and resulting in a denial of service. |
| An unauthenticated
NULL pointer dereference vulnerability exists in the HTTP request parsing logic
of multiple CGI components in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and
earlier. The vulnerability is caused by improper validation of required HTTP
request metadata before it is used by the affected components. A remote attacker
may exploit this vulnerability by sending a specially crafted HTTP request,
causing the affected process to crash and resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx()
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fully validate 'pinmux' property
The pinconf_generic_parse_dt_pinmux() assumes that the 'pinmux' property
is not empty when present. This might be not true. With that, the allocator
will give a special value in return and not NULL which lead to the crash
when trying to access that (invalid) memory. Fix that by fully validating
'pinmux' value, including its length. |
| In the Linux kernel, the following vulnerability has been resolved:
reset: amlogic: t7: Fix null reset ops
Fix missing reset ops causing kernel null pointer dereference.
This SOC's reset is currently not used yet. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.26.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the envoy.filters.http.grpc_stats filter crashes (null pointer dereference / segfault) when a Connect protocol request (Content-Type: application/connect+proto or application/connect+json) hits a direct_response route. A single unauthenticated HTTP request crashes the Envoy process. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, when the %REQUESTED_SERVER_NAME(X:Y)% is used in log format and host related options is specified, like HOST_FIRST, SNI_FIRST, it's possible to crash Envoy when the specified host header is missing in the request headers. This vulnerability is fixed in 1.37.5 and 1.38.3. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: avoid potential null folio->mapping deref during error reporting
When a buffered read fails, iomap_finish_folio_read() reports the error
with fserror_report_io(folio->mapping->host, ...). This is called after
ifs->read_bytes_pending has been decremented by the bytes attempted to
be read.
For a folio split across multiple read completions, the folio is only
guaranteed to stay locked while read_bytes_pending > 0. Once
iomap_finish_folio_read() decrements read_bytes_pending, another
in-flight read can complete and end the read on the folio, which unlocks
it. This allows truncate logic to run and detach the folio (set
folio->mapping to NULL). The error reporting path then can dereference a
NULL folio->mapping. As reported by Sam Sun, this is the race that can
occur:
CPU0: failed completion CPU1: final completion CPU2: truncate
----------------------- ---------------------- --------------
read_bytes_pending -= len
finished = false
/* preempted before
fserror_report_io() */
read_bytes_pending -= len
finished = true
folio_end_read()
truncate clears
folio->mapping
fserror_report_io(
folio->mapping->host, ...)
^ NULL deref
Fix this by reporting the error first before decrementing
ifs->read_bytes_pending. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |