| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: Bounds check struct nfc_target arrays
While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported:
memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18)
This appears to be a legitimate lack of bounds checking in
nci_add_new_protocol(). Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix crash due to incorrect copy_map_value
When both bpf_spin_lock and bpf_timer are present in a BPF map value,
copy_map_value needs to skirt both objects when copying a value into and
out of the map. However, the current code does not set both s_off and
t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock
is placed in map value with bpf_timer, as bpf_map_update_elem call will
be able to overwrite the other timer object.
When the issue is not fixed, an overwriting can produce the following
splat:
[root@(none) bpf]# ./test_progs -t timer_crash
[ 15.930339] bpf_testmod: loading out-of-tree module taints kernel.
[ 16.037849] ==================================================================
[ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325
[ 16.039399]
[ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278
[ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014
[ 16.040485] Call Trace:
[ 16.040645] <TASK>
[ 16.040805] dump_stack_lvl+0x59/0x73
[ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.041427] kasan_report.cold+0x116/0x11b
[ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520
[ 16.042328] ? memcpy+0x39/0x60
[ 16.042552] ? pv_hash+0xd0/0xd0
[ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0
[ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0
[ 16.043366] ? bpf_get_current_comm+0x50/0x50
[ 16.043608] ? jhash+0x11a/0x270
[ 16.043848] bpf_timer_cancel+0x34/0xe0
[ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81
[ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000
[ 16.044836] __x64_sys_nanosleep+0x5/0x140
[ 16.045119] do_syscall_64+0x59/0x80
[ 16.045377] ? lock_is_held_type+0xe4/0x140
[ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40
[ 16.046001] ? mark_held_locks+0x24/0x90
[ 16.046287] ? asm_exc_page_fault+0x1e/0x30
[ 16.046569] ? asm_exc_page_fault+0x8/0x30
[ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100
[ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.047405] RIP: 0033:0x7f9e4831718d
[ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023
[ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d
[ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0
[ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0
[ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30
[ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 16.051608] </TASK>
[ 16.051762] ================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, Fix slab-out-of-bounds in mlx5_cmd_dr_create_fte
When adding a rule with 32 destinations, we hit the following out-of-band
access issue:
BUG: KASAN: slab-out-of-bounds in mlx5_cmd_dr_create_fte+0x18ee/0x1e70
This patch fixes the issue by both increasing the allocated buffers to
accommodate for the needed actions and by checking the number of actions
to prevent this issue when a rule with too many actions is provided. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.
The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:
Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64
If the RX FIFO depth changes after probe, be sure to resize the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]
Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631
CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
memcpy+0x39/0x60 mm/kasan/shadow.c:66
memcpy include/linux/fortify-string.h:225 [inline]
packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_recvmsg net/socket.c:962 [inline]
____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
___sys_recvmsg+0x127/0x200 net/socket.c:2674
__sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdfd5954c29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29
RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60
R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54
</TASK>
addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame:
____sys_recvmsg+0x0/0x600 include/linux/uio.h:246
this frame has 1 object:
[32, 160) 'addr'
Memory state around the buggy address:
ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00
ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
^
ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1
ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix ia_size underflow
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix the behavior of READ near OFFSET_MAX
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: ti: Fix missing sentinel for clk_div_table
_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.
[ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[ 9.565926]
[ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[ 9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[ 9.581832] Workqueue: events_unbound deferred_probe_work_func
[ 9.587708] Call trace:
[ 9.590174] dump_backtrace+0x20c/0x218
[ 9.594038] show_stack+0x18/0x68
[ 9.597375] dump_stack_lvl+0x9c/0xd8
[ 9.601062] print_address_description.constprop.0+0x78/0x334
[ 9.606830] kasan_report+0x1f0/0x260
[ 9.610517] __asan_load4+0x9c/0xd8
[ 9.614030] _get_maxdiv+0xc0/0x148
[ 9.617540] divider_determine_rate+0x88/0x488
[ 9.622005] divider_round_rate_parent+0xc8/0x124
[ 9.626729] wiz_clk_div_round_rate+0x54/0x68
[ 9.631113] clk_core_determine_round_nolock+0x124/0x158
[ 9.636448] clk_core_round_rate_nolock+0x68/0x138
[ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8
[ 9.645987] clk_set_rate+0x50/0xa8
[ 9.649499] cdns_sierra_phy_init+0x88/0x248
[ 9.653794] phy_init+0x98/0x108
[ 9.657046] cdns_pcie_enable_phy+0xa0/0x170
[ 9.661340] cdns_pcie_init_phy+0x250/0x2b0
[ 9.665546] j721e_pcie_probe+0x4b8/0x798
[ 9.669579] platform_probe+0x8c/0x108
[ 9.673350] really_probe+0x114/0x630
[ 9.677037] __driver_probe_device+0x18c/0x220
[ 9.681505] driver_probe_device+0xac/0x150
[ 9.685712] __device_attach_driver+0xec/0x170
[ 9.690178] bus_for_each_drv+0xf0/0x158
[ 9.694124] __device_attach+0x184/0x210
[ 9.698070] device_initial_probe+0x14/0x20
[ 9.702277] bus_probe_device+0xec/0x100
[ 9.706223] deferred_probe_work_func+0x124/0x180
[ 9.710951] process_one_work+0x4b0/0xbc0
[ 9.714983] worker_thread+0x74/0x5d0
[ 9.718668] kthread+0x214/0x230
[ 9.721919] ret_from_fork+0x10/0x20
[ 9.725520]
[ 9.727032] The buggy address belongs to the variable:
[ 9.732183] clk_div_table+0x24/0x440 |
| In the Linux kernel, the following vulnerability has been resolved:
net: amd-xgbe: Fix skb data length underflow
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: max9759: fix underflow in speaker_gain_control_put()
Check for negative values of "priv->gain" to prevent an out of bounds
access. The concern is that these might come from the user via:
-> snd_ctl_elem_write_user()
-> snd_ctl_elem_write()
-> kctl->put() |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: improve size validations for received domain records
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.
This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.
tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16. To
avert any risk of bit overflow, we add an extra sanity check for this in
that function. We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer. This potential problem was identified by Eric Dumazet.
This fixes CVE-2022-0435 |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: spi: Reserve space for register address/padding
Currently the max_raw_read and max_raw_write limits in regmap_spi struct
do not take into account the additional size of the transmitted register
address and padding. This may result in exceeding the maximum permitted
SPI message size, which could cause undefined behaviour, e.g. data
corruption.
Fix regmap_get_spi_bus() to properly adjust the above mentioned limits
by reserving space for the register address/padding as set in the regmap
configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix overflow for large capacity partition
Using int type for sector index, there will be overflow in a large
capacity partition.
For example, if storage with sector size of 512 bytes and partition
capacity is larger than 2TB, there will be overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.
Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations
__free_slab() invocations out of IRQ context") moved all flush_cpu_slab()
invocations to the global workqueue to avoid a problem related
with deactivate_slab()/__free_slab() being called from an IRQ context
on PREEMPT_RT kernels.
When the flush_all_cpu_locked() function is called from a task context
it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up
flushing the global workqueue, this will cause a dependency issue.
workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core]
is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab
WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637
check_flush_dependency+0x10a/0x120
Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace:
__flush_work.isra.0+0xbf/0x220
? __queue_work+0x1dc/0x420
flush_all_cpus_locked+0xfb/0x120
__kmem_cache_shutdown+0x2b/0x320
kmem_cache_destroy+0x49/0x100
bioset_exit+0x143/0x190
blk_release_queue+0xb9/0x100
kobject_cleanup+0x37/0x130
nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc]
nvme_free_ctrl+0x1ac/0x2b0 [nvme_core]
Fix this bug by creating a workqueue for the flush operation with
the WQ_MEM_RECLAIM bit set. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix crash by keep old cfg when update TCs more than queues
There are problems if allocated queues less than Traffic Classes.
Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config
for DCB") already disallow setting less queues than TCs.
Another case is if we first set less queues, and later update more TCs
config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty
num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access.
[ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated.
[ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)!
[ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0
[ 95.969621] general protection fault: 0000 [#1] SMP NOPTI
[ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1
[ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021
[ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60
[ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c
[ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206
[ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0
[ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200
[ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000
[ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100
[ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460
[ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000
[ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0
[ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 95.971530] PKRU: 55555554
[ 95.971573] Call Trace:
[ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice]
[ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice]
[ 95.971774] ice_vsi_open+0x25/0x120 [ice]
[ 95.971843] ice_open_internal+0xb8/0x1f0 [ice]
[ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice]
[ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice]
[ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice]
[ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice]
[ 95.972220] dcbnl_ieee_set+0x89/0x230
[ 95.972279] ? dcbnl_ieee_del+0x150/0x150
[ 95.972341] dcb_doit+0x124/0x1b0
[ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0
[ 95.972457] ? dcb_doit+0x14d/0x1b0
[ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280
[ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100
[ 95.972661] netlink_rcv_skb+0xcf/0xf0
[ 95.972720] netlink_unicast+0x16d/0x220
[ 95.972781] netlink_sendmsg+0x2ba/0x3a0
[ 95.975891] sock_sendmsg+0x4c/0x50
[ 95.979032] ___sys_sendmsg+0x2e4/0x300
[ 95.982147] ? kmem_cache_alloc+0x13e/0x190
[ 95.985242] ? __wake_up_common_lock+0x79/0x90
[ 95.988338] ? __check_object_size+0xac/0x1b0
[ 95.991440] ? _copy_to_user+0x22/0x30
[ 95.994539] ? move_addr_to_user+0xbb/0xd0
[ 95.997619] ? __sys_sendmsg+0x53/0x80
[ 96.000664] __sys_sendmsg+0x53/0x80
[ 96.003747] do_syscall_64+0x5b/0x1d0
[ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca
Only update num_txq/rxq when passed check, and restore tc_cfg if setup
queue map failed. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: refactor malicious adv data check
Check for out-of-bound read was being performed at the end of while
num_reports loop, and would fill journal with false positives. Added
check to beginning of loop processing so that it doesn't get checked
after ptr has been advanced. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: validate extended element ID is present
Before attempting to parse an extended element, verify that
the extended element ID is present. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix type in min_t to avoid stack OOB
Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707
CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x23/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical. |
