| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: fix phy_get_internal_delay accessing an empty array
The phy_get_internal_delay function could try to access to an empty
array in the case that the driver is calling phy_get_internal_delay
without defining delay_values and rx-internal-delay-ps or
tx-internal-delay-ps is defined to 0 in the device-tree.
This will lead to "unable to handle kernel NULL pointer dereference at
virtual address 0". To avoid this kernel oops, the test should be delay
>= 0. As there is already delay < 0 test just before, the test could
only be size == 0. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: flower: handle acti_netdevs allocation failure
The kmalloc_array() in nfp_fl_lag_do_work() will return null, if
the physical memory has run out. As a result, if we dereference
the acti_netdevs, the null pointer dereference bugs will happen.
This patch adds a check to judge whether allocation failure occurs.
If it happens, the delayed work will be rescheduled and try again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()'
The 'stream' pointer is used in dcn10_set_output_transfer_func() before
the check if 'stream' is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini()
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()'
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
if (replay == NULL && force_static)
return false;
...
if (link->replay_settings.replay_feature_enabled &&
replay->funcs->replay_set_power_opt) {
replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
link->replay_settings.replay_power_opt_active = *power_opts;
}
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887) |
| In the Linux kernel, the following vulnerability has been resolved:
clk: Fix clk_core_get NULL dereference
It is possible for clk_core_get to dereference a NULL in the following
sequence:
clk_core_get()
of_clk_get_hw_from_clkspec()
__of_clk_get_hw_from_provider()
__clk_get_hw()
__clk_get_hw() can return NULL which is dereferenced by clk_core_get() at
hw->core.
Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based
clk_lookups") the check IS_ERR_OR_NULL() was performed which would have
caught the NULL.
Reading the description of this function it talks about returning NULL but
that cannot be so at the moment.
Update the function to check for hw before dereferencing it and return NULL
if hw is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.
This patch uses a stack variable to replace the kmalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
The TX buffer in spi_transfer can be a NULL pointer, so the interrupt
handler may end up writing to the invalid memory and cause crashes.
Add a check to trans->tx_buf before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: null check for nla_nest_start
nla_nest_start() may fail and return NULL. Insert a check and set errno
based on other call sites within the same source code. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: max310x: fix NULL pointer dereference in I2C instantiation
When trying to instantiate a max14830 device from userspace:
echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device
we get the following error:
Unable to handle kernel NULL pointer dereference at virtual address...
...
Call trace:
max310x_i2c_probe+0x48/0x170 [max310x]
i2c_device_probe+0x150/0x2a0
...
Add check for validity of devtype to prevent the error, and abort probe
with a meaningful error message. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix a NULL pointer dereference
A NULL pointer dereference is triggered when probing the MMIO RAPL
driver on platforms with CPU ID not listed in intel_rapl_common CPU
model list.
This is because the intel_rapl_common module still probes on such
platforms even if 'defaults_msr' is not set after commit 1488ac990ac8
("powercap: intel_rapl: Allow probing without CPUID match"). Thus the
MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework.
Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults
is always valid. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Add error handling in xhci_map_urb_for_dma
Currently xhci_map_urb_for_dma() creates a temporary buffer and copies
the SG list to the new linear buffer. But if the kzalloc_node() fails,
then the following sg_pcopy_to_buffer() can lead to crash since it
tries to memcpy to NULL pointer.
So return -ENOMEM if kzalloc returns null pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: netlink: access device through ctx instead of peer
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: Fix NULL pointer dereference when get power limit
Because powerplay_table initialization is skipped under
sriov case, We check and set default lower and upper OD
value if powerplay_table is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: qcom: at803x: fix kernel panic with at8031_probe
On reworking and splitting the at803x driver, in splitting function of
at803x PHYs it was added a NULL dereference bug where priv is referenced
before it's actually allocated and then is tried to write to for the
is_1000basex and is_fiber variables in the case of at8031, writing on
the wrong address.
Fix this by correctly setting priv local variable only after
at803x_probe is called and actually allocates priv in the phydev struct. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISCV: Fix panic on pmu overflow handler
(1 << idx) of int is not desired when setting bits in unsigned long
overflowed_ctrs, use BIT() instead. This panic happens when running
'perf record -e branches' on sophgo sg2042.
[ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 273.320851] Oops [#1]
[ 273.323179] Modules linked in:
[ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9
[ 273.332521] Hardware name: Sophgo Mango (DT)
[ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e
[ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0
[ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978
[ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70
[ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000
[ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015
[ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a
[ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0
[ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210
[ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098
[ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca
[ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8
[ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d
[ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee
[ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36
[ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e
[ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74
[ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92
[ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783
[ 273.477921] ---[ end trace 0000000000000000 ]---
[ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when 1588 is received on HIP08 devices
The HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL, but the hardware can receive 1588 messages,
and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the
access of hdev->ptp->flags will cause a kernel crash:
[ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
[ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge]
[ 5889.279101] sp : ffff800012c3bc50
[ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040
[ 5889.289927] x27: ffff800009116484 x26: 0000000080007500
[ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000
[ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000
[ 5889.309134] x21: 0000000000000000 x20: ffff204004220080
[ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000
[ 5889.321897] x17: 0000000000000000 x16: 0000000000000000
[ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000
[ 5889.334617] x13: 0000000000000000 x12: 00000000010011df
[ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000
[ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d
[ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480
[ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000
[ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000
[ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080
[ 5889.378857] Call trace:
[ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3]
[ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3]
[ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3]
[ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3]
[ 5889.411084] napi_poll+0xcc/0x264
[ 5889.415329] net_rx_action+0xd4/0x21c
[ 5889.419911] __do_softirq+0x130/0x358
[ 5889.424484] irq_exit+0x134/0x154
[ 5889.428700] __handle_domain_irq+0x88/0xf0
[ 5889.433684] gic_handle_irq+0x78/0x2c0
[ 5889.438319] el1_irq+0xb8/0x140
[ 5889.442354] arch_cpu_idle+0x18/0x40
[ 5889.446816] default_idle_call+0x5c/0x1c0
[ 5889.451714] cpuidle_idle_call+0x174/0x1b0
[ 5889.456692] do_idle+0xc8/0x160
[ 5889.460717] cpu_startup_entry+0x30/0xfc
[ 5889.465523] secondary_start_kernel+0x158/0x1ec
[ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80)
[ 5889.477950] SMP: stopping secondary CPUs
[ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95
[ 5890.522951] Starting crashdump kernel... |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: Add missing clocks to axg_clk_regmaps
Some clocks were missing from axg_clk_regmaps, which caused kernel panic
during cat /sys/kernel/debug/clk/clk_summary
[ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc
...
[ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 57.436900] pc : regmap_read+0x1c/0x88
[ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.445611] sp : ffff800082f1b690
[ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70
[ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000
[ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000
[ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff
[ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000
[ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100
[ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24
[ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710
[ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000
[ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000
[ 57.519615] Call trace:
[ 57.522030] regmap_read+0x1c/0x88
[ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.530050] clk_core_is_enabled+0x44/0x120
[ 57.534190] clk_summary_show_subtree+0x154/0x2f0
[ 57.538847] clk_summary_show_subtree+0x220/0x2f0
[ 57.543505] clk_summary_show_subtree+0x220/0x2f0
[ 57.548162] clk_summary_show_subtree+0x220/0x2f0
[ 57.552820] clk_summary_show_subtree+0x220/0x2f0
[ 57.557477] clk_summary_show_subtree+0x220/0x2f0
[ 57.562135] clk_summary_show_subtree+0x220/0x2f0
[ 57.566792] clk_summary_show_subtree+0x220/0x2f0
[ 57.571450] clk_summary_show+0x84/0xb8
[ 57.575245] seq_read_iter+0x1bc/0x4b8
[ 57.578954] seq_read+0x8c/0xd0
[ 57.582059] full_proxy_read+0x68/0xc8
[ 57.585767] vfs_read+0xb0/0x268
[ 57.588959] ksys_read+0x70/0x108
[ 57.592236] __arm64_sys_read+0x24/0x38
[ 57.596031] invoke_syscall+0x50/0x128
[ 57.599740] el0_svc_common.constprop.0+0x48/0xf8
[ 57.604397] do_el0_svc+0x28/0x40
[ 57.607675] el0_svc+0x34/0xb8
[ 57.610694] el0t_64_sync_handler+0x13c/0x158
[ 57.615006] el0t_64_sync+0x190/0x198
[ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00)
[ 57.624668] ---[ end trace 0000000000000000 ]---
[jbrunet: add missing Fixes tag] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix NULL pointer dereference in f2fs_submit_page_write()
BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
this code before "skip:" to make sure it's done for each fio. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
We've been seeing the following panic in production
BUG: kernel NULL pointer dereference, address: 0000000000000065
PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0
RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x286/0x380
? __rpc_execute+0x2c3/0x470 [sunrpc]
? rpc_new_task+0x42/0x1c0 [sunrpc]
? exc_page_fault+0x5d/0x110
? asm_exc_page_fault+0x22/0x30
? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles]
pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4]
pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4]
? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles]
nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles]
ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles]
__nfs_pageio_add_request+0x154/0x6c0 [nfs]
nfs_pageio_add_request+0x26b/0x380 [nfs]
nfs_do_writepage+0x111/0x1e0 [nfs]
nfs_writepages_callback+0xf/0x30 [nfs]
write_cache_pages+0x17f/0x380
? nfs_pageio_init_write+0x50/0x50 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
nfs_writepages+0x125/0x210 [nfs]
do_writepages+0x67/0x220
? generic_perform_write+0x14b/0x210
filemap_fdatawrite_wbc+0x5b/0x80
file_write_and_wait_range+0x6d/0xc0
nfs_file_fsync+0x81/0x170 [nfs]
? nfs_file_mmap+0x60/0x60 [nfs]
__x64_sys_fsync+0x53/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Inspecting the core with drgn I was able to pull this
>>> prog.crashed_thread().stack_trace()[0]
#0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27
>>> prog.crashed_thread().stack_trace()[0]['idx']
(u32)1
>>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds
(struct nfs4_ff_layout_ds *)0xffffffffffffffed
This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds()
which could error out initializing the mirror_ds, and then we go to
clean it all up and our check is only for if (!mirror->mirror_ds). This
is inconsistent with the rest of the users of mirror_ds, which have
if (IS_ERR_OR_NULL(mirror_ds))
to keep from tripping over this exact scenario. Fix this up in
ff_layout_cancel_io() to make sure we don't panic when we get an error.
I also spot checked all the other instances of checking mirror_ds and we
appear to be doing the correct checks everywhere, only unconditionally
dereferencing mirror_ds when we know it would be valid. |
