| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked
permanently.
Fix this by removing the early return. Instead, synchronously cancel any
pending work with cancel_delayed_work_sync() before freeing @utn.
To be able to call cancel_delayed_work_sync() while holding RTNL (the work also
needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL
is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work())
to prevent high CPU contention while waiting for RTNL lock.
The utn->work_pending bookkeeping is no longer needed and is removed, as
the workqueue core already tracks the pending/running state of the work.
[1]
BUG: memory leak
unreferenced object 0xffff888127d5f840 (size 96):
comm "syz-executor", pid 5806, jiffies 4294942188
backtrace (crc 99fdb6c8):
__kmalloc_noprof+0x3bf/0x550
udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline]
udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline]
udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931
notifier_call_chain+0x59/0x160 kernel/notifier.c:85
call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250
register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't let an 'F' entry pin its own instance
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
Note that SB_I_NODEV is implicitly raised for userns mounts but raise it
explicitly here as well. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: restore write access when removing an entry
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497d7 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, io.netty.handler.codec.xml.XmlFrameDecoder.decode() failed to preserve closing-tag parser state across invocations, so an unauthenticated remote attacker could trickle-feed repeated </ sequences that repeatedly rescanned the accumulated buffer and exhausted an EventLoop thread's CPU, causing denial of service with a maxFrameLength of 1 MB. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte buffer using index-based backtracking for '..' segments, eliminating the quadratic time complexity and significantly reducing memory allocations. |
| ParseAcceptLanguage quadratic-time DoS via Locale middleware on unauthenticated requests |
| Enforce a recursion limit in Unmarshal to prevent stack exhaustion when parsing deeply-nested, recursive structures. |
| js-yaml is a JavaScript YAML parser and dumper. From 5.0.0 until 5.2.2, parsing a small YAML document can take exponential time when an application calls load() or loadAll() on untrusted input. In src/parser/parser.ts, readFlowCollection uses restoreState and calls parseNode a second time when a flow-sequence entry is recognized as a key: value pair. If the key is a nested flow sequence of the same shape, every level is parsed twice, causing O(2^n) work and allowing an input under 200 bytes to keep one CPU busy for minutes, block the Node.js event loop, and stall the process. No anchors, aliases, merges, tags, or nondefault options are required. This issue is fixed in version 5.2.2. |
| @hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.26.0, the /v1/completions CompletionRequest.prompt field in vllm/entrypoints/openai/completion/protocol.py accepts an unbounded list[str] or list[list[int]], prompt_to_seq() in vllm/renderers/inputs/preprocess.py and OnlineRenderer.preprocess_completion() in vllm/renderers/online_renderer.py expand every element, and vllm/entrypoints/openai/completion/serving.py creates one engine generator and response slot per prompt, allowing an authenticated API client to exhaust CPU, memory, async scheduling capacity, engine request slots, and response buffering with one request. This issue is fixed in version 0.26.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the structured_outputs.regex parameter in vllm/v1/structured_output/backend_lm_format_enforcer.py is passed to lmformatenforcer.RegexParser without compile_regex_with_timeout or validation in validate_structured_output_request_lm_format_enforcer, allowing an unauthenticated /v1/completions request against the lm-format-enforcer backend to consume a CPU core and stall the structured-output engine path with a catastrophic regular expression. This issue is fixed in version 0.26.0. |
| A flaw has been found in Calix GigaSpire 26.1.0. Impacted is an unknown function of the file utilities_configurationsave.cgi of the component Web Management Interface. Executing a manipulation of the argument sessionKey can lead to denial of service. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| rsync before 3.5.0 contains an algorithmic complexity vulnerability in the hash_search() function that allows a remote attacker to cause a denial of service by delivering a carefully constructed file list. A sender can exploit the quadratic-time worst-case behavior in hash lookups to exhaust receiver CPU resources with a modest number of crafted entries, causing a sustained denial of service. |
| A vulnerability was found in TRENDnet TEW-816DRM GURNC4.OT182B-C-TN-R1B028-US.EN. This impacts an unknown function of the file /etc/bftpd.conf of the component bftpd. The manipulation of the argument USERLIMIT_GLOBAL results in allocation of resources. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| CAI Content Credentials is affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction. |
