| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyond the request_sock allocation when they access inet_sock or
ipv6_pinfo state.
Resolve the owner with skb_to_full_sk() in both callbacks and bail out when
no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error
logic, which already reasons about full sockets with skb_to_full_sk(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Bound fragmented header copies by the remaining length
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| Transient DOS when processing a continuous receive command with a zero-sized global configuration override. |
| Improper Validation of Specified Quantity in Input vulnerability in VillaTheme BuildKit – Product Builder for WooCommerce – Custom PC Builder woo-product-builder allows Input Data Manipulation.This issue affects BuildKit – Product Builder for WooCommerce – Custom PC Builder: from n/a through 1.0.28. |
| Craft CMS 5.10.13.2 contains an authenticated remote code execution vulnerability in the Control Panel action app/render-components.
Any authenticated user with basic Control Panel access can submit request-controlled component classes and property overrides. By first overriding an EntryType object’s uiLabelFormat and then rendering an Entry that resolves the same request-cached entry type, an attacker can cause arbitrary Twig supplied in the request to be evaluated by renderObjectTemplate().
This render path is not sandboxed. A Twig string callable can therefore reach PHP functions such as system(), resulting in operating-system command execution with the privileges of the PHP/web-server process.
The issue was reproduced with an active non-admin Craft Team user with no optional permissions enabled. No access to entry-editing, Settings, utility, user-management, project-config, filesystem, Kubernetes, or environment variables was required. |
| A vulnerability has been found in Tenda AC5 02.03.01.111_multi. Affected by this issue is some unknown functionality of the file /goform/setWifi of the component Wifi Handler. Such manipulation of the argument wifiPwd leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in vllm-project vLLM up to 0.31.0. This impacts the function conv_ssm_forward of the file vllm/model_executor/layers/mamba/mamba_mixer2.py of the component Completions Request Handler. The manipulation leads to out-of-bounds read. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Zebra before 6.1.0 contains an incorrect calculation vulnerability in its ZIP-317 block template selector that omits header and transaction-count size from the block budget. Attackers can place valid selectable transactions in a victim miner's mempool to shape templates into oversized blocks, causing rejection and wasted proof-of-work. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary. |
| A flaw was found in GLib. A buffer over-read can occur in g_io_channel_read_line_backend() in the giochannel.c file when a custom line terminator with a length greater than one is set, causing memcmp to read past the GString buffer. This vulnerability can cause a minor information disclosure of 7 bytes or a denial of service when the buffer over-read crosses a page boundary. |
| A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary. |
| A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service. |
| A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary. |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| In stpropnci_process of stpropnci.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
