| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Only accept connection responses to outstanding requests
An outgoing channel waits in BT_CONNECT until security
and the feature mask exchange complete, and only then
sends its connection request. A peer can answer it
before that with a connection response matching our
source CID. The channel then moves to BT_CONFIG,
completes configuration and becomes connected before
security has completed. If security then fails,
l2cap_security_cfm() leaves the connected channel
alone, so it stays up on a link that did not reach
the required security level.
A connection response with a zero source CID is
matched by identifier. Another channel can hold the
same identifier for a response it still has to send,
so the lookup can pick the wrong channel.
Only accept a connection response while our request
is outstanding, and only look at such channels when
matching by identifier. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: remove bogus context initialization in alloc_requests
alloc_requests() initializes usb9pfs->in_req->context to point at the
struct f_usb9pfs instance itself. usb9pfs_queue_tx() later overwrites
this with the real struct p9_req_t pointer before every transmit, and
usb9pfs_tx_complete() clears it back to NULL after each completion, so
in_req->context only ever holds a valid p9_req_t once a request has
actually been queued.
usb9pfs_clear_tx(), however, can run at any time (mount close, gadget
disable) independent of whether a request was ever queued. If it runs
before the first usb9pfs_transmit(), it reads the leftover sentinel
value, type-confuses the struct f_usb9pfs pointer as a struct
p9_req_t, and both writes through it (req->t_err = -ECONNRESET) and
hands it to p9_client_cb(), which manipulates req->wq and req->refcount
at bogus offsets inside f_usb9pfs. This reliably corrupts memory or
panics whenever the transport is torn down before any 9p request has
been transmitted, e.g. mounting and immediately unmounting, or a cable
disconnect racing the very first request.
usb9pfs->out_req->context is set the same way but is never read by
this transport (usb9pfs_rx_complete() identifies the instance via
ep->driver_data instead), so it serves no purpose either.
Both endpoints' ->driver_data are already set to usb9pfs in
enable_endpoint(), which is what the completion handlers actually use
to recover the f_usb9pfs instance. Just drop the leftover
->context assignments; usb_ep_alloc_request()/alloc_ep_req() already
return zeroed requests, so in_req->context correctly starts out NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: treat empty auth.unix.gid replies as negative entries
When rpc.mountd cannot resolve a uid (getpwuid() or getgrouplist()
failure, e.g. while winbind or sssd is briefly unreachable), it
answers the auth.unix.gid upcall with zero groups. unix_gid_parse()
installs that as a valid positive entry, and svcauth_unix_set_client()
then replaces the credential's group list with the empty one on
every request, RPCSEC_GSS included via svcauth_gss_set_client().
One failed lookup strips that uid of all supplementary groups on
every export for up to mountd's configured TTL (30 minutes by
default), long after the NSS backend has recovered.
mountd cannot send an empty list for a successful lookup, since
getgrouplist(3) always includes at least the user's primary group,
so a zero-group reply can only mean the lookup failed. Record it as
a negative entry: unix_gid_find() then returns -ENOENT and
svcauth_unix_set_client() keeps the groups the RPC credential
already carries. This is the fallback that
commit 3fc605a2aa38 ("[PATCH] knfsd: allow the server to provide a
gid list when using AUTH_UNIX authentication") promised when no
answer is available, and the same state try_to_negate_entry()
already creates when no listener holds the channel open. |
| Mongoose Embedded Web Server / Networking Library before 7.24 contains a WebSocket fragmentation validation vulnerability that allows remote attackers to spoof message metadata by sending a single CONTINUATION frame with FIN=1 as the first data frame instead of a required TEXT/BINARY start frame, violating RFC 6455 sequencing rules. Attackers can craft this malformed frame to make mg_ws_cb() in src/ws.c misinterpret the first byte of payload as saved FIN/opcode flags, causing the application to receive a dispatched MG_EV_WS_MSG event with attacker-controlled flags and data truncated by one byte without closing the connection. |
| A vulnerability in the eXtensible ARchive (XAR) GZIP file parser for ClamAV could allow an unauthenticated, remote attacker to exceed the configured MaxFileSize and cause a DoS condition on an affected device.
This vulnerability is due to inefficiencies when parsing specifically formatted files with the XAR GZIP file parser. An attacker could exploit this vulnerability by by sending a crafted XAR GZIP file to be scanned. A successful exploit could allow the attacker to effectively cause the ClamAV to exceed the MaxFileSize and potentially get caught in an infinite loop, causing a DoS condition. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: fix VA/PA confusion in the coherent page fault path
vduse_domain_get_coherent_page() assumes that iotlb entries above
bounce_size were installed by vduse_domain_alloc_coherent(), so it
treats map->addr as a physical address. But vduse registers with
use_va = true, and when the device is bound to vhost_vdpa,
vhost_vdpa_va_map() stores a userspace virtual address in map->addr,
which vduse_domain_set_map() then copies into the same iotlb. A
process holding the domain file descriptor across a rebind can
therefore fault in an arbitrary physical page with read/write
access, ignoring the entry permissions.
Additionally, since the domain file mmap lacks VM_IO, the domain
file itself can be mapped and passed to vhost_vdpa_va_map(),
producing self-referential entries that bypass the coherent path
check.
To fix, only translate entries whose backing file is the domain
file itself in vduse_domain_get_coherent_page(), reject such
entries in vduse_domain_set_map() since only external mappings
should be imported, and set VM_IO on the domain file mmap so
vhost_vdpa_va_map() refuses to map it in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm87) Fix drvdata type confusion in vrm_show() and vrm_store()
When an LM87 or ADM1024 device is probed with VID support enabled, reading
from or writing to the vrm sysfs attribute triggers a driver data type
confusion in vrm_show() and vrm_store() in drivers/hwmon/lm87.c.
In lm87_probe(), the driver stores the struct lm87_data pointer on the I2C
client via i2c_set_clientdata() and passes the struct i2c_client pointer as
the drvdata argument to devm_hwmon_device_register_with_groups(), which
attaches the attribute groups to the registered hwmon device with client as
its driver_data. Unlike the other sysfs callbacks that retrieve client via
dev_get_drvdata() and then obtain data via i2c_get_clientdata(), vrm_show()
and vrm_store() assign dev_get_drvdata(dev) directly to struct lm87_data *.
Dereferencing data->vrm therefore accesses the struct i2c_client instance
at offsetof(struct lm87_data, vrm), causing vrm_show() to leak an unrelated
byte from struct i2c_client to userspace and vrm_store() to corrupt a byte
within struct i2c_client while failing to update the actual VRM value.
Fix the problem by assigning the return value from dev_get_drvdata(dev) to
struct i2c_client *client and using i2c_get_clientdata() to get the actual
client data. |
| Quasar before 2.35.3 contains a DOM clobbering vulnerability that allows attackers to break native wrapper detection by injecting HTML elements named Capacitor, cordova, or StatusBar. Attackers can place markup such as a div with id Capacitor into server-rendered or pre-rendered HTML so app.use(Quasar) throws and the application never mounts, or openURL() and AddressbarColor.set() throw. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004
cros_usbpd_notify_probe_acpi() takes the EC device pointer from
dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device.
That only holds when GOOG0003 is a child of GOOG0004. On older devices
without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are
siblings under the ACPI EC (PNP0C09):
PNP0C09:00 (acpi-ec)
|-- GOOG0003:00 (cros-usbpd-notify-acpi)
`-- GOOG0004:00 (cros_ec_lpcs)
Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform
one") the parent platform device had no driver data, so the driver
warned and continued without an EC pointer, as intended for these
devices. Since that commit the ACPI EC driver stores its struct acpi_ec
there, so the driver treats a struct acpi_ec as a struct cros_ec_device
and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging
or unplugging a charger then intermittently oopses, followed by soft
lockups and a hung system:
BUG: unable to handle page fault for address: ffffffff9cf03220
#PF: supervisor write access in kernel mode
Hardware name: Google Nami/Nami, BIOS 09/19/2019
Workqueue: kacpi_notify acpi_os_execute_deferred
RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330
Call Trace:
_raw_spin_lock_irqsave+0x59/0x80
__mutex_lock.constprop.0+0x129/0x930
cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto]
cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto]
cros_ec_cmd+0xb7/0x140 [cros_ec_proto]
cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify]
acpi_ev_notify_dispatch+0x4e/0x70
acpi_os_execute_deferred+0x1a/0x30
Only read the parent's driver data when the parent's ACPI node is
GOOG0004, and otherwise continue without an EC pointer. While at it,
drop the reference taken by fwnode_get_parent(). |
| USB-PTP protocol dissector crash in 4.6.0 to 4.6.9 allows denial of service |
| Multiple protocol dissector crashes in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service |
| PROFINET protocol dissector crash in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service |
| When message history is serialized and loaded again, a tool result that contains a JSON object in the serialized shape of one of Pydantic AI's file types is rebuilt as that file. A third party who controls data a tool returns, such as a record that an MCP server or a function tool returns from an external system, can use this to make the application download a URL on its local network, or make the model provider read an s3:// object or uploaded file with the application's credentials. Applications are affected when tool results can contain third-party data, message history containing those results is serialized and loaded again (stored history, history a UI adapter holds on the server, or Temporal, DBOS or Prefect durable execution), and the model is one Pydantic AI downloads files for, one that honors force_download, or one whose provider resolves non-HTTP file URLs or uploaded files. History that a client submits through the Vercel AI or AG-UI adapter in the default mode is not affected. The issue is fixed in pydantic-ai and pydantic-ai-slim 1.107.10 and 2.66.0. |
| Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response.
In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode.
A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM.
This issue affects gun: from 2.0.0-pre.1 before 2.4.0. |
| A flaw was found in Keycloak. An authenticated remote user with a pending required security action, such as configuring multi-factor authentication (MFA), can bypass the mandatory action by submitting a specially crafted request to the consent endpoint without a valid session code. Keycloak incorrectly interprets the submission as a page refresh and completes the authentication process, allowing the user to access the application without fulfilling the required security policies. |
| Access of resource using incompatible type ('type confusion') in Windows Shell allows an authorized attacker to elevate privileges locally. |
| In Eclipse iceoryx-rs, versions 0.0.11 to 0.0.13 and 0.1.0 as well as on the latest main branch.
`SampleReceiver::<T>::take()` and `Sample::<T>::deref()` are safe functions that hand the caller a `&T` pointing at a chunk written by another iceoryx process, but the subscriber path neither requires `T: ShmSend` nor verifies that the received chunk is at least `size_of::<T>()` bytes / `align_of::<T>()`-aligned. A peer process that publishes an undersized chunk, or any chunk at all when the subscriber chose a pointer-bearing `T`, drives a `#![forbid(unsafe_code)]` subscriber into out-of-bounds reads of adjacent shared-memory chunks or dereference of a publisher-controlled pointer.
Resolution:
It will not be fixed since this is a known limitation in iceoryx as it is the users responsibility to specify the same data type on sender and receiver side.
[iceoryx2](https://github.com/eclipse-iceoryx/iceoryx2) is the successor of iceoryx-rs where the API is designed to prevent this by default.
It is strongly recommended to migrate to iceoryx2 which is actively maintained and receives security support.
The iceoryx-rs package has officially reached End-of-life and will not receive any features, bugfixes or security fixes. |
| GPAC before 26.07.0 contains a type confusion vulnerability in xmt_parse_script_field() that allows attackers to trigger a heap out-of-bounds read via duplicate Script field names with conflicting types. Attackers can craft an XMT file that, when imported with MP4Box, causes gf_sg_vrml_mf_reset() to treat a single-value field as multi-value, crashing the application. |
| Wasmtime 47.0.0 before 48.0.8, 49.0.0 before 49.0.5, and 50.0.0 before 50.0.1 contains a cross-engine type confusion vulnerability because StructType::with_finality_and_supertype does not validate that the supplied supertype belongs to the same Engine. Embedders using multiple engines that create a GC struct type with another engine's supertype can trigger runtime panics or GC heap corruption, causing denial of service; guest WebAssembly cannot trigger it. |
| Improper enforcement of behavioral workflow in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to potentially launch a guest whose attestation report contains an ID key digest for an ID block that doesn't match the guest's measurement resulting in loss of integrity. |