| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final. |
| Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue in WebSocketServerExtensionHandler. The handler offers an entry to its per-channel validExtensions queue for every inbound HttpRequest, but polls an entry only when the application writes an HttpResponse, and the queue size is never bounded. A remote, unauthenticated peer can use HTTP/1.1 pipelining to send requests faster than the application produces responses — including plain non-upgrade HTTP requests to any path — causing the queue to grow without limit until the JVM exhausts heap memory and terminates with OutOfMemoryError. Because the affected handler is the base class of WebSocketServerCompressionHandler, any server that enables permessage-deflate is exposed on its plain HTTP port before any WebSocket upgrade completes and before any application-level authentication. Affected versions are 4.1.88.Final through 4.1.137.Final and 4.2.0.Final through 4.2.17.Final; the issue is fixed in 4.1.138.Final and 4.2.18.Final. |
| Netty (io.netty:netty-codec-http) contains an unbounded per-connection queue growth flaw in HttpServerCodec. The codec tracks the HTTP method of each still-unanswered pipelined request; the first 32 entries are bit-packed into a single long, but every additional entry is appended to methodOverflowQueue, an ArrayDeque with no size limit and no rejection path. A remote, unauthenticated attacker who pipelines HTTP/1.1 requests on a single connection while withholding reads on their own end (preventing responses from being flushed) can grow this queue without bound, causing unbounded heap growth and denial of service. Affected versions are 4.2.0.Final through 4.2.17.Final and all releases up to and including 4.1.137.Final; the issue is fixed in 4.2.18.Final and 4.1.138.Final. |
| Netty (io.netty:netty-codec-http) versions up to and including 4.1.137.Final and from 4.2.0.Final through 4.2.17.Final accept an unlimited number of concurrent remote-initiated SPDY streams: SpdySessionHandler defaults localConcurrentStreams to Integer.MAX_VALUE and exposes no API to change it. A remote peer that opens a SPDY connection and sends millions of SYN_STREAM frames with FLAG_FIN=0 causes the server to allocate unbounded heap and direct memory, eventually triggering a JVM OutOfMemoryError and crashing the service. Fixed in 4.1.138.Final and 4.2.18.Final. |
| vLLM before 0.29.0 contains a resource-limit bypass vulnerability in PyNvVideoCodec decoder allocation where sampler subclass shadowing allows independent counter increments. Unauthenticated attackers can select different sampler subclasses in video requests to exceed configured decoder limits and exhaust unaccounted GPU memory. |
| ClawHub (the openclaw/clawhub application/backend) does not bind anonymous HTTP API requests to a trusted caller identity, so all direct anonymous API requests share a single default quota allowance. A remote, unauthenticated caller can drain that shared allowance and thereby deny or degrade API access for unrelated visitors. In addition, when the TRUST_FORWARDED_IPS option is enabled without an authenticated edge/proxy, clients can supply arbitrary forwarded IP headers to select quota identities of their choosing and evade rate limiting. The issue was confirmed at revision cbfee7343ddc867316dd9b3de6fa8856730f9f41; the complete historical affected range was not established. It is fixed in revision 8c2de6c506bb4efabe3f0c2ffb8370b9e23d4650 (PR #3684), where direct anonymous calls are redirected to the public API origin without consuming quota and forged identity assertions return HTTP 401. The npm CLI and OpenClaw runtime are separate products and are not affected. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the Web STOMP WebSocket handler enforced neither max_frame_size nor login_timeout before authentication, allowing an unauthenticated client to keep a connection alive with a slow stream of small frames and accumulate unbounded pre-authentication state. The rabbitmq_web_stomp plugin must be enabled, and no authentication is required to reach the vulnerable path. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| cleanup_xml_node() in the SOAP XML parser recurses once per XML nesting level with no depth limit. An unauthenticated attacker can post a SOAP request containing tens of thousands of nested elements to any SoapServer endpoint, exhaust the stack and crash the process. The same unbounded recursion exists in the SOAP value decoder and in the WSDL node search helper. |
| libfyaml 0.9.6 contains a stack exhaustion vulnerability in fy_atom_iter_format(). When processing a specially crafted YAML document containing a very large literal or folded block scalar, the function repeatedly grows an internal buffer using alloca() inside a loop. The allocated stack memory is not released until the function returns, causing cumulative stack growth that can exceed the process stack limit and result in SIGSEGV and denial of service. |
| hiredis commit 29ea279 (post-v1.5.0) contains an uncontrolled memory allocation vulnerability in its RESP aggregate parser. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: xgmac2: disable RBUE in default RX interrupt mask
Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive
and can trigger a MAC interrupt storm under heavy RX pressure. When the
DMA runs out of RX descriptors it fires RBUE continuously until software
refills the ring.
However, RBUE is redundant: the normal RX completion interrupt (RIE)
already triggers NAPI, which processes completed descriptors and refills
the ring, causing the DMA to resume. The RBUE handler itself only sets
handle_rx - the same outcome as RIE.
On Agilex5 under heavy RX pressure, the MAC interrupt (which includes
RBUE) was observed firing 1,821,811,555 times against only 2,618,627
actual RX completions - a ~695x ratio - confirming the severity of the
storm.
RBUE does not provide OOM recovery. If page_pool is exhausted,
stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays
suspended, and RBUE fires again on the next NAPI completion - a storm
with no forward progress. This patch trades that storm for a clean
stall with the same RX outcome. Proper OOM recovery is a pre-existing
gap outside the scope of this fix.
Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool
counter will always read 0 on XGMAC2 devices. This behaviour is already
inconsistent across DWMAC core versions.
Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX
to prevent the interrupt storm while keeping normal RX handling intact. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's NE relocation fixup-chain parser was vulnerable because the NE relocation parser followed fixup chains without an active iteration limit or cycle detection. The vulnerability is triggered by opening a crafted NE executable whose in-bounds relocation entry points back to itself instead of reaching 0xffff. The parser repeatedly processed the same relocation and allocated another relocation object on each iteration. This can cause denial of service through continuous CPU and memory consumption. This issue is fixed in version 6.2.0. |
| Cloudreve is a self-hosted file management and sharing system. Prior to 4.18.0, PrepareUpload in pkg/filemanager/fs/dbfs/upload.go checks a stale in-memory user storage value through validateUserCapacity and later applies an unconditional storage charge outside the same quota-enforcing transaction. An authenticated user with Files.Write permission can issue concurrent upload-session requests that read the same capacity snapshot, all pass the MaxStorage check, and reserve their declared sizes through CommitWithStorageDiff. The resulting reservations can exceed the account quota and can be materialized as chunked uploads that exhaust host storage and deny uploads to other users. The default local-storage policy and default User group are affected. This issue is fixed in version 4.18.0. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't spin forever on zero-length dirents when salvaging them
LOLLM noticed that xrep_dir_recover_data can spin forever if it
encounters an unused dirent that claims to have length zero. Fix that,
and prevent the same thing from happening with a zero-length entry. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark faultable stack helpers as sleepable
The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass
may_fault=true into the common stack collection code. Resolving user-space
build IDs may then call build_id_parse_file() and block on filesystem
reads.
Neither helper prototype sets might_sleep. Since prototype selection uses
the sleepability of the whole program, the verifier can still allow these
helpers from a non-sleepable region within that program, such as an
explicit RCU or preemption-disabled region. The task-stack helper can also
be called from a non-sleepable timer callback of a sleepable program.
Mark both faultable prototypes as sleepable. The existing helper context
check then rejects these calls while continuing to allow them in genuinely
sleepable contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject oversized tx_queue_len at netlink parse time
rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len
without going through netif_change_tx_queue_len(), so a device created
with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and
still triggers the oversized ring allocations in pfifo_fast, tun and
tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the
RTM_NEWLINK-on-existing-device path reach the same sinks.
Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes
NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with
txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers
parse against this policy - rtnl_setlink(), rtnl_newlink() (create
and change), and the veth peer nest - so every netlink path is capped
at parse time and rejects the attribute with -ERANGE plus a proper
"integer out of range" extack message before any device state is
modified (the RTM_SETLINK half-application wart is gone with it).
Document the bound in the rt-link.yaml netlink spec.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn):
ip link add v0 txqueuelen 500000 type veth peer name v1
-> on the fixed kernel this is rejected with -ERANGE ("integer out
of range" extack) instead of installing an oversized tx_queue_len
that later inflates pfifo_fast/tun/tap ring allocations.
- ip link set v0 txqueuelen 500000 is likewise rejected at parse time. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations
Several subsystems allocate ring buffers sized by dev->tx_queue_len
with no upper bound. An unprivileged user (via unshare -Urn) can set a
huge tx_queue_len and exhaust global memory with ring allocations:
- pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len()
allocate 3 skb_array rings of tx_queue_len entries each.
- tun: tun_queue_resize() and the queue-attach path resize ptr_rings
to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier.
- tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init
ptr_rings to tx_queue_len on the same notifier.
netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN,
sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767)
there so the oversized value is rejected at set time. This takes
effect whether the device is up or down, before dev->tx_queue_len is
written, before any notifier fires, and before any ring is allocated.
The "> S16_MAX" check also subsumes the previous unsigned-long
truncation test, and a negative ifr_qlen from the ioctl lands far
above the cap after conversion, so both old failure modes are covered
by the one comparison.
tx_queue_len is ambigious: both a per-ring sizing multiplier and a
default queue-length/limit knob for consumers that allocate
nothing at set time (pfifo/bfifo/gred/plug/sfb limits, htb
direct_qlen, qfq max_classes, teql). 32767 is chosen as the largest
value NLA_POLICY_FULL_RANGE can express for the u32 IFLA_TXQLEN
policy in patch 2/3 while staying a legitimate queue length on
high-BDP paths; the ring-memory trade-off of a shared knob is
disclosed below.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn).
- pfifo_fast: create veth pairs, set tx_queue_len to 500000, attach
mq+pfifo_fast. ~28 iterations OOMs a 2GB guest.
- tun: create 50 tun devices with IFF_MULTI_QUEUE, set tx_queue_len to
500000, open 8 queues each. ~1.6GB of ptr_ring allocations OOMs a
512MB guest.
- tap: same as tun with IFF_TAP. ~960MB OOMs a 512MB guest.
- On the fixed kernel the oversized tx_queue_len is rejected with
-ERANGE at set time (all four paths: RTM_SETLINK, RTM_NEWLINK
create, sysfs, ioctl - the latter two via this check, the former
two via this check and the 2/3 parse policy respectively). |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
