| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Guard mana_remove against double invocation
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
__input_process_payload() stores first_skb into xtfs->ra_newskb under
drop_lock when starting partial reassembly, then unlocks and breaks out
of the processing loop. The post-loop check reads xtfs->ra_newskb
without the lock to decide whether first_skb is still owned:
if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb)
Between spin_unlock and this read, a concurrent CPU running
iptfs_reassem_cont() (or the drop_timer hrtimer) can complete
reassembly, NULL xtfs->ra_newskb, and free the skb. The check then
evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb
operate on the freed skb — a use-after-free in skbuff_head_cache.
Replace the unlocked read with a local bool that records whether
first_skb was handed to the reassembly state in the current call. The
flag is set after the existing spin_unlock, before the break, using the
pointer equality that is stable at that point (first_skb == skb iff
first_skb was stored in ra_newskb). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: update file PMD counter before folio_put()
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: use round-robin victim selection in refill_stock
Harry Yoo reported that get_random_u32_below() is not safe to call in the
nmi context and memcg charge draining can happen in nmi context.
More specifically get_random_u32_below() is neither reentrant- nor
NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the
batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the
ChaCha batch state and recurses into the random subsystem would corrupt
that state. The memcg_stock local_trylock prevents re-entry on the percpu
stock itself, but cannot protect an unrelated subsystem's per-cpu lock.
Replace the random pick with a per-cpu round-robin counter stored in
memcg_stock_pcp and serialized by the same local_trylock that already
guards cached[] and nr_pages[]. No atomics, no random calls, no extra
locks needed. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free race in fastrpc_map_create
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: Fix use-after-free during device removal
The driver was using devm_register_netdev() which causes unregister_netdev()
to be deferred until the devres cleanup phase, which runs after emac_remove()
returns. This creates a use-after-free window where:
1. emac_remove() is called, which tears down hardware (cancels work, detaches
modules, unregisters from MAL)
2. emac_remove() returns
3. devres cleanup runs and finally calls unregister_netdev()
During step 3, the network stack might still process packets, triggering
emac_irq(), emac_poll(), or other handlers that access now-freed hardware
resources (dev->emacp, dev->mal, etc.).
Fix this by replacing devm_register_netdev() with manual register_netdev()
and calling unregister_netdev() at the beginning of emac_remove(), before
any hardware teardown. This ensures the network device is fully stopped and
unregistered before hardware resources are released.
The change is safe because:
- dev->ndev is assigned very early in probe (before any error paths that
could bypass emac_remove)
- platform_set_drvdata() is only called after successful registration, so
emac_remove() only runs for fully registered devices
- unregister_netdev() is idempotent and safe to call on any registered device |
| A time-of-create-to-time-of-use (TOCTOU) vulnerability lets recently deleted-then-recreated data sources be re-deleted without permission to do so.
This requires several very stringent conditions to be met:
- The attacker must have admin access to the specific datasource prior to its first deletion.
- Upon deletion, all steps within the attack must happen within the next 30 seconds and on the same pod of Grafana.
- The attacker must delete the datasource, then someone must recreate it.
- The new datasource must not have the attacker as an admin.
- The new datasource must have the same UID as the prior datasource. These are randomised by default.
- The datasource can now be re-deleted by the attacker.
- Once 30 seconds are up, the attack is spent and cannot be repeated.
- No datasource with any other UID can be attacked. |
| In N2WS Backup & Recovery before 4.4.0, a two-step attack against the RESTful API results in remote code execution. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to `std::string` concurrent access. with heap-use-after-free possible. This is triggered by EVCCID update (EV/ISO15118) and OCPP session/authorization events. Version 2026.02.0 contains a patch. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race (C++ UB) triggered by an A 1-phase ↔ 3-phase switch request (`ac_switch_three_phases_while_charging`) during charging/waiting executes concurrently with the state machine loop. Version 2026.02.0 contains a patch. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to `std::map<std::optional>` concurrent access (container/optional corruption possible). The trigger is EV SoC update with powermeter periodic update and unplugging/SessionFinished status. Version 2026.02.0 patches the issue. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to `std::map<std::optional>` concurrent access (container/optional corruption possible). The trigger is an EV SoC update with powermeter periodic update and unplugging/SessionFinished state. Version 2026.2.0 contains a patch. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to possible `std::map<std::queue>` corruption. The trigger is CSMS GetLog/UpdateFirmware request (network) with an EVSE fault event (physical). This results in TSAN reports concurrent access (data race) to `event_queue`. Version 2026.2.0 contains a patch. |
| EVerest is an EV charging software stack. Versions prior to 2026.02.0 have a data race leading to C++ UB (potential memory corruption). This is triggered by an MQTT `everest_external/nodered/{connector}/cmd/switch_three_phases_while_charging` message and results in `Charger::shared_context` / `internal_context` accessed concurrently without lock. Version 2026.02.0 contains a patch. |
| Devise is an authentication solution for Rails based on Warden. Prior to version 5.0.3, a race condition in Devise's Confirmable module allows an attacker to confirm an email address they do not own. This affects any Devise application using the `reconfirmable` option (the default when using Confirmable with email changes). By sending two concurrent email change requests, an attacker can desynchronize the `confirmation_token` and `unconfirmed_email` fields. The confirmation token is sent to an email the attacker controls, but the `unconfirmed_email` in the database points to a victim's email address. When the attacker uses the token, the victim's email is confirmed on the attacker's account. This is patched in Devise v5.0.3. Users should upgrade as soon as possible. As a workaround, applications can override a specific method from Devise models to force `unconfirmed_email` to be persisted when unchanged. Note that Mongoid does not seem to respect that `will_change!` should force the attribute to be persisted, even if it did not really change, so the user might have to implement a workaround similar to Devise by setting `changed_attributes["unconfirmed_email"] = nil` as well. |
| Race condition, use-after-free in the Graphics: WebRender component. This vulnerability affects Firefox < 149, Firefox ESR < 115.34, Firefox ESR < 140.9, Thunderbird < 149, and Thunderbird < 140.9. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.60 and 9.6.0-alpha.54, an attacker who obtains a user's password and a single MFA recovery code can reuse that recovery code an unlimited number of times by sending concurrent login requests. This defeats the single-use design of recovery codes. The attack requires the user's password, a valid recovery code, and the ability to send concurrent requests within milliseconds. This issue has been patched in versions 8.6.60 and 9.6.0-alpha.54. |