Filtered by vendor Ntp
Subscriptions
Filtered by product Ntp
Subscriptions
Total
99 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2015-7848 | 2 Netapp, Ntp | 6 Clustered Data Ontap, Data Ontap Operating In 7-mode, Oncommand Balance and 3 more | 2025-05-23 | 7.5 High |
| An integer overflow can occur in NTP-dev.4.3.70 leading to an out-of-bounds memory copy operation when processing a specially crafted private mode packet. The crafted packet needs to have the correct message authentication code and a valid timestamp. When processed by the NTP daemon, it leads to an immediate crash. | ||||
| CVE-2020-13817 | 5 Fujitsu, Netapp, Ntp and 2 more | 41 M10-1, M10-1 Firmware, M10-4 and 38 more | 2025-05-05 | 7.4 High |
| ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows remote attackers to cause a denial of service (daemon exit or system time change) by predicting transmit timestamps for use in spoofed packets. The victim must be relying on unauthenticated IPv4 time sources. There must be an off-path attacker who can query time from the victim's ntpd instance. | ||||
| CVE-2020-11868 | 5 Debian, Netapp, Ntp and 2 more | 24 Debian Linux, All Flash Fabric-attached Storage 8300, All Flash Fabric-attached Storage 8300 Firmware and 21 more | 2025-05-05 | 7.5 High |
| ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows an off-path attacker to block unauthenticated synchronization via a server mode packet with a spoofed source IP address, because transmissions are rescheduled even when a packet lacks a valid origin timestamp. | ||||
| CVE-2016-9310 | 2 Ntp, Redhat | 2 Ntp, Enterprise Linux | 2025-04-20 | N/A |
| The control mode (mode 6) functionality in ntpd in NTP before 4.2.8p9 allows remote attackers to set or unset traps via a crafted control mode packet. | ||||
| CVE-2016-7433 | 2 Ntp, Redhat | 2 Ntp, Enterprise Linux | 2025-04-20 | N/A |
| NTP before 4.2.8p9 does not properly perform the initial sync calculations, which allows remote attackers to unspecified impact via unknown vectors, related to a "root distance that did not include the peer dispersion." | ||||
| CVE-2016-1548 | 2 Ntp, Redhat | 3 Ntp, Enterprise Linux, Rhel Eus | 2025-04-20 | N/A |
| An attacker can spoof a packet from a legitimate ntpd server with an origin timestamp that matches the peer->dst timestamp recorded for that server. After making this switch, the client in NTP 4.2.8p4 and earlier and NTPSec aa48d001683e5b791a743ec9c575aaf7d867a2b0c will reject all future legitimate server responses. It is possible to force the victim client to move time after the mode has been changed. ntpq gives no indication that the mode has been switched. | ||||
| CVE-2015-8140 | 1 Ntp | 1 Ntp | 2025-04-20 | N/A |
| The ntpq protocol in NTP before 4.2.8p7 allows remote attackers to conduct replay attacks by sniffing the network. | ||||
| CVE-2015-7973 | 5 Canonical, Freebsd, Netapp and 2 more | 9 Ubuntu Linux, Freebsd, Clustered Data Ontap and 6 more | 2025-04-20 | 6.5 Medium |
| NTP before 4.2.8p6 and 4.3.x before 4.3.90, when configured in broadcast mode, allows man-in-the-middle attackers to conduct replay attacks by sniffing the network. | ||||
| CVE-2017-6455 | 1 Ntp | 1 Ntp | 2025-04-20 | N/A |
| NTP before 4.2.8p10 and 4.3.x before 4.3.94, when using PPSAPI, allows local users to gain privileges via a DLL in the PPSAPI_DLLS environment variable. | ||||
| CVE-2016-7426 | 4 Canonical, Hpe, Ntp and 1 more | 10 Ubuntu Linux, Hpux-ntp, Ntp and 7 more | 2025-04-20 | 7.5 High |
| NTP before 4.2.8p9 rate limits responses received from the configured sources when rate limiting for all associations is enabled, which allows remote attackers to cause a denial of service (prevent responses from the sources) by sending responses with a spoofed source address. | ||||
| CVE-2016-7429 | 2 Ntp, Redhat | 2 Ntp, Enterprise Linux | 2025-04-20 | N/A |
| NTP before 4.2.8p9 changes the peer structure to the interface it receives the response from a source, which allows remote attackers to cause a denial of service (prevent communication with a source) by sending a response for a source to an interface the source does not use. | ||||
| CVE-2015-7703 | 5 Debian, Netapp, Ntp and 2 more | 14 Debian Linux, Clustered Data Ontap, Data Ontap and 11 more | 2025-04-20 | 7.5 High |
| The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command. | ||||
| CVE-2017-6464 | 2 Ntp, Redhat | 2 Ntp, Enterprise Linux | 2025-04-20 | N/A |
| NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive. | ||||
| CVE-2015-7855 | 4 Debian, Netapp, Ntp and 1 more | 11 Debian Linux, Clustered Data Ontap, Data Ontap and 8 more | 2025-04-20 | 6.5 Medium |
| The decodenetnum function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (assertion failure) via a 6 or mode 7 packet containing a long data value. | ||||
| CVE-2017-6460 | 1 Ntp | 1 Ntp | 2025-04-20 | N/A |
| Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response. | ||||
| CVE-2016-2518 | 7 Debian, Freebsd, Netapp and 4 more | 20 Debian Linux, Freebsd, Clustered Data Ontap and 17 more | 2025-04-20 | 5.3 Medium |
| The MATCH_ASSOC function in NTP before version 4.2.8p9 and 4.3.x before 4.3.92 allows remote attackers to cause an out-of-bounds reference via an addpeer request with a large hmode value. | ||||
| CVE-2015-5194 | 6 Canonical, Debian, Fedoraproject and 3 more | 14 Ubuntu Linux, Debian Linux, Fedora and 11 more | 2025-04-20 | N/A |
| The log_config_command function in ntp_parser.y in ntpd in NTP before 4.2.7p42 allows remote attackers to cause a denial of service (ntpd crash) via crafted logconfig commands. | ||||
| CVE-2017-6451 | 1 Ntp | 1 Ntp | 2025-04-20 | N/A |
| The mx4200_send function in the legacy MX4200 refclock in NTP before 4.2.8p10 and 4.3.x before 4.3.94 does not properly handle the return value of the snprintf function, which allows local users to execute arbitrary code via unspecified vectors, which trigger an out-of-bounds memory write. | ||||
| CVE-2015-5195 | 5 Canonical, Debian, Fedoraproject and 2 more | 9 Ubuntu Linux, Debian Linux, Fedora and 6 more | 2025-04-20 | N/A |
| ntp_openssl.m4 in ntpd in NTP before 4.2.7p112 allows remote attackers to cause a denial of service (segmentation fault) via a crafted statistics or filegen configuration command that is not enabled during compilation. | ||||
| CVE-2015-8138 | 2 Ntp, Redhat | 2 Ntp, Enterprise Linux | 2025-04-20 | N/A |
| NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to bypass the origin timestamp validation via a packet with an origin timestamp set to zero. | ||||