| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Checking excessively long invalid RSA public keys may take
a long time.
Impact summary: Applications that use the function EVP_PKEY_public_check()
to check RSA public keys may experience long delays. Where the key that
is being checked has been obtained from an untrusted source this may lead
to a Denial of Service.
When function EVP_PKEY_public_check() is called on RSA public keys,
a computation is done to confirm that the RSA modulus, n, is composite.
For valid RSA keys, n is a product of two or more large primes and this
computation completes quickly. However, if n is an overly large prime,
then this computation would take a long time.
An application that calls EVP_PKEY_public_check() and supplies an RSA key
obtained from an untrusted source could be vulnerable to a Denial of Service
attack.
The function EVP_PKEY_public_check() is not called from other OpenSSL
functions however it is called from the OpenSSL pkey command line
application. For that reason that application is also vulnerable if used
with the '-pubin' and '-check' options on untrusted data.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: A timing side-channel which could potentially allow recovering
the private key exists in the ECDSA signature computation.
Impact summary: A timing side-channel in ECDSA signature computations
could allow recovering the private key by an attacker. However, measuring
the timing would require either local access to the signing application or
a very fast network connection with low latency.
There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In particular
the NIST P-521 curve is affected. To be able to measure this leak, the attacker
process must either be located in the same physical computer or must
have a very fast network connection with low latency. For that reason
the severity of this vulnerability is Low.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are affected by this issue. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted
explicit values for the field polynomial can lead to out-of-bounds memory reads
or writes.
Impact summary: Out of bound memory writes can lead to an application crash or
even a possibility of a remote code execution, however, in all the protocols
involving Elliptic Curve Cryptography that we're aware of, either only "named
curves" are supported, or, if explicit curve parameters are supported, they
specify an X9.62 encoding of binary (GF(2^m)) curves that can't represent
problematic input values. Thus the likelihood of existence of a vulnerable
application is low.
In particular, the X9.62 encoding is used for ECC keys in X.509 certificates,
so problematic inputs cannot occur in the context of processing X.509
certificates. Any problematic use-cases would have to be using an "exotic"
curve encoding.
The affected APIs include: EC_GROUP_new_curve_GF2m(), EC_GROUP_new_from_params(),
and various supporting BN_GF2m_*() functions.
Applications working with "exotic" explicit binary (GF(2^m)) curve parameters,
that make it possible to represent invalid field polynomials with a zero
constant term, via the above or similar APIs, may terminate abruptly as a
result of reading or writing outside of array bounds. Remote code execution
cannot easily be ruled out.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a
server may fail to notice that the server was not authenticated, because
handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode
is set.
Impact summary: TLS and DTLS connections using raw public keys may be
vulnerable to man-in-middle attacks when server authentication failure is not
detected by clients.
RPKs are disabled by default in both TLS clients and TLS servers. The issue
only arises when TLS clients explicitly enable RPK use by the server, and the
server, likewise, enables sending of an RPK instead of an X.509 certificate
chain. The affected clients are those that then rely on the handshake to
fail when the server's RPK fails to match one of the expected public keys,
by setting the verification mode to SSL_VERIFY_PEER.
Clients that enable server-side raw public keys can still find out that raw
public key verification failed by calling SSL_get_verify_result(), and those
that do, and take appropriate action, are not affected. This issue was
introduced in the initial implementation of RPK support in OpenSSL 3.2.
The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| A double free vulnerability exists in libcurl <8.0.0 when sharing HSTS data between separate "handles". This sharing was introduced without considerations for do this sharing across separate threads but there was no indication of this fact in the documentation. Due to missing mutexes or thread locks, two threads sharing the same HSTS data could end up doing a double-free or use-after-free. |
| When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory. Further, this error condition fails silently and is therefore not easily detected by an application. |
| ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9. |
| An authentication bypass vulnerability exists in libcurl prior to v8.0.0 where it reuses a previously established SSH connection despite the fact that an SSH option was modified, which should have prevented reuse. libcurl maintains a pool of previously used connections to reuse them for subsequent transfers if the configurations match. However, two SSH settings were omitted from the configuration check, allowing them to match easily, potentially leading to the reuse of an inappropriate connection. |
| A path traversal vulnerability exists in curl <8.0.0 SFTP implementation causes the tilde (~) character to be wrongly replaced when used as a prefix in the first path element, in addition to its intended use as the first element to indicate a path relative to the user's home directory. Attackers can exploit this flaw to bypass filtering or execute arbitrary code by crafting a path like /~2/foo while accessing a server with a specific user. |
| AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p). |
| An issue was discovered in GNOME GLib before 2.66.6 and 2.67.x before 2.67.3. The function g_bytes_new has an integer overflow on 64-bit platforms due to an implicit cast from 64 bits to 32 bits. The overflow could potentially lead to memory corruption. |
| An issue was discovered in GNOME GLib before 2.66.7 and 2.67.x before 2.67.4. If g_byte_array_new_take() was called with a buffer of 4GB or more on a 64-bit platform, the length would be truncated modulo 2**32, causing unintended length truncation. |
| In filter.c in slapd in OpenLDAP before 2.4.50, LDAP search filters with nested boolean expressions can result in denial of service (daemon crash). |
| There's a flaw in bfd_pef_parse_function_stubs of bfd/pef.c in binutils in versions prior to 2.34 which could allow an attacker who is able to submit a crafted file to be processed by objdump to cause a NULL pointer dereference. The greatest threat of this flaw is to application availability. |
| There's a flaw in bfd_pef_scan_start_address() of bfd/pef.c in binutils which could allow an attacker who is able to submit a crafted file to be processed by objdump to cause a NULL pointer dereference. The greatest threat of this flaw is to application availability. This flaw affects binutils versions prior to 2.34. |
| There's a flaw in binutils /bfd/pef.c. An attacker who is able to submit a crafted input file to be processed by the objdump program could cause a null pointer dereference. The greatest threat from this flaw is to application availability. This flaw affects binutils versions prior to 2.34. |
| There's a flaw in binutils /opcodes/tic4x-dis.c. An attacker who is able to submit a crafted input file to be processed by binutils could cause usage of uninitialized memory. The highest threat is to application availability with a lower threat to data confidentiality. This flaw affects binutils versions prior to 2.34. |
| A flaw exists in binutils in bfd/pef.c. An attacker who is able to submit a crafted PEF file to be parsed by objdump could cause a heap buffer overflow -> out-of-bounds read that could lead to an impact to application availability. This flaw affects binutils versions prior to 2.34. |
